充液卫星平放式贮箱内液体晃动的等效力学模型

本文研究带平放式贮箱的三轴定向充液卫星的液体晃动及其姿态动力学问题，建立了充液系统的等效力学模型，并由该模型研究了充液卫星的姿态稳定性，得到了主刚体作平面摆动时系统的姿态稳定性判据     

Anomalous enhancement of electric field derived from ionosonde data before the great Wenchuan earthquake

The seismo-ionospheric coupling is a hot topic of modern scientific research. One of the most reasonable mechanisms is the hypothesis of quasistatic electric field. With a preliminary analytical method, electric field in F2-region before Wenchuan earthquake was derived from the five lower latitude ground-based ionosondes: Lhasa (29.63°N, 91.17°E), Chongqing (29.50°N, 106.40°E), Kunming (25.00°N, 102.70°E), Guangzhou (23.15°N, 113.35°E) and Haikou (23.15°N, 110.35°E). The results show that there was an anomalous enhancement of electric field in F2-region close to the epicenter with maximal amplitude ∼2 mV/m (about 10 times of the background) at 15:00 LT on 9 May, which is in line with the amplitudes of anomalous electric field related to some previous earthquakes observed by satellites.     

Waveform-based spaceborne GNSS-R wind speed observation: Demonstration and analysis using UK TechDemoSat-1 data

This paper explores two types of mathematical functions to fit single- and full-frequency waveform of spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R), respectively. The metrics of the waveforms, such as the noise floor, peak magnitude, mid-point position of the leading edge, leading edge slope and trailing edge slope, can be derived from the parameters of the proposed models. Because the quality of the UK TDS-1 data is not at the level required by remote sensing mission, the waveforms buried in noise or from ice/land are removed by defining peak-to-mean ratio, cosine similarity of the waveform before wind speed are retrieved. The single-parameter retrieval models are developed by comparing the peak magnitude, leading edge slope and trailing edge slope derived from the parameters of the proposed models with in situ wind speed from the ASCAT scatterometer. To improve the retrieval accuracy, three types of multi-parameter observations based on the principle component analysis (PCA), minimum variance (MV) estimator and Back Propagation (BP) network are implemented. The results indicate that compared to the best results of the single-parameter observation, the approaches based on the principle component analysis and minimum variance could not significantly improve retrieval accuracy, however, the BP networks obtain improvement with the RMSE of 2.55 m/s and 2.53 m/s for single- and full-frequency waveform, respectively.     

Hybrid calibration method for six-component force/torque transducers of wind tunnel balance based on support vector machines

A hybrid calibration approach based on support vector machines (SVM) is proposed to characterize nonlinear cross coupling of multi-dimensional transducer. It is difficult to identify these unknown nonlinearities and crosstalk just with a single conventional calibration approach. In this paper, a hybrid model comprising calibration matrix and SVM model for calibrating linearity and nonlinearity respectively is built up. The calibration matrix is determined by linear artificial neural network (ANN), and the SVM is used to compensate for the nonlinear cross coupling among each dimension. A simulation of the calibration of a multi-dimensional sensor is conducted by the SVM hybrid calibration method, which is then utilized to calibrate a six-component force/torque transducer of wind tunnel balance. From the calibrating results, it can be indicated that the SVM hybrid calibration method has improved the calibration accuracy significantly without increasing data samples, compared with calibration matrix. Moreover, with the calibration matrix, the hybrid model can provide a basis for the design of transducers.     

去中心化时差频差直接定位方法

针对原始利用时差频差的直接定位(DPD)方法存在数据传输量和计算量大的瓶颈,提出了两种去中心化直接定位方法。第1种方法采用去中心化配对方案,只将各观测站截获信号在站间进行一次传输,将数据传输和计算分散到各观测站间并行计算互模糊函数(CAF),构造仅满足满秩条件的互模糊矩阵(CAM)。第2种方法根据推导的任意互模糊函数间关系公式,采用归约方式去中心化的在各观测站并行计算余下互模糊函数,补全互模糊矩阵。两种方法都降低了直接定位数据传输量,提高了计算效率。性能分析和仿真实验表明本文两种方法精度性能优于两步定位方法,在低信噪比时两种方法都可达到比较理想的精度性能,在高信噪比时第2种方法与原始直接定位方法的精度性能相当。     

空间核电源热管式辐射散热器热分析与参数优化

针对空间热管辐射散热器的特殊工况对散热器进行热分析建模，通过分析其传热原理，建立出热阻模型，并通过和实际设计进行对比，验证模型和计算方法的可行性。选取翅根温度、翅片长度和翅片厚度等参量作为约束条件，分别对热管式空间辐射散热器的翅片散热效率和系统质量特性进行优化分析，获得最优设计参数。     

浅谈焊接的分类

探讨了焊接方法分类的原则,使用的范围.分析了焊接的能源与它们之间的关系,对焊接运用的条件,焊接的目的进行了分类和定义.     

Nb、Ti微合金元素对中厚板组织结构及力学性能的影响

Q345B普通钢板在控制轧制过程中适量添加了Nb、Ti微合金元素，通过金相观察、力学试验，其组织结构及力学性能均有明显改善，可见通过对微合金元素的选择性添加以及对其在钢中成分的控制，在经过控轧控冷后能够得到我们所需求性能的钢，这对控制轧制具有较高的现实意义。     

Thermally evolved gas analysis (TEGA) of hyperarid soils doped with microorganisms from the Atacama Desert in southern Peru: Implications for the Phoenix mission

TEGA, one of several instruments on board of the Phoenix Lander, performed differential scanning calorimetry and evolved gas analysis of soil samples and ice, collected from the surface and subsurface at a northern landing site on Mars. TEGA is a combination of a high temperature furnace and a mass spectrometer (MS) that was used to analyze samples delivered to the instrument via a robotic arm. The samples were heated at a programmed ramp rate up to 1000 °C. The power required for heating can be carefully and continuously monitored (scanning calorimetry). The evolved gases generated during the process can be analyzed with the evolved gas analyzer (a magnetic sector mass spectrometer) in order to determine the composition of gases released as a function of temperature. Our laboratory has developed a sample characterization method using a pyrolyzer integrated to a quadrupole mass spectrometer to support the interpretations of TEGA data. Here we examine the evolved gas properties of six types of hyperarid soils from the Pampas de La Joya in southern Peru (a possible analog to Mars), to which we have added with microorganisms (Salmonella typhimurium, Micrococcus luteus, and Candida albicans) in order to investigate the effect of the soil matrix on the TEGA response. Between 20 and 40 mg of soil, with or without ∼5 mg of lyophilized microorganism biomass (dry weight), were placed in the pyrolyzer and heated from room temperature to 1200 °C in 1 h at a heating rate of 20 °C/min. The volatiles released were transferred to a MS using helium as a carrier gas. The quadrupole MS was ran in scan mode from 10 to 200 m/z. In addition, ∼20 mg of each microorganism without a soil matrix were analyzed. As expected, there were significant differences in the gases released from microorganism samples with or without a soil matrix, under similar heating conditions. Furthermore, samples from the most arid environments had significant differences compared with less arid soils. Organic carbon released in the form of CO₂ (ion 44 m/z) from microorganisms evolved at temperatures of ∼326.0 ± 19.5 °C, showing characteristic patterns for each one. Others ions such as 41, 78 and 91 m/z were also found. Interestingly, during the thermal process, the release of CO₂ increased and ions previously found disappeared, demonstrating a high-oxidant activity in the soil matrix when it was subjected to high temperature. Finally, samples of soil show CO₂ evolved up to 650 °C consistent with thermal decomposition of carbonates. These results indicate that organics mixed with these hyperarid soils are oxidized to CO₂. Our results suggest the existence of at least two types of oxidants in these soils, a thermolabile oxidant which is highly oxidative and other thermostable oxidant which has a minor oxidative activity and that survives the heat-treatment. Furthermore, we find that the interaction of biomass added to soil samples gives a different set of breakdown gases than organics resident in the soil. The nature of oxidant(s) present in the soils from Pampas de La Joya is still unknown.     

TE_（113）模波导侧壁耦合滤波器的研究

文章描述了一种侧壁耦合波导滤波器的设计方法,详细探讨了侧壁耦合结构,并在对侧壁耦合分析的基础上,使用CST软件仿真了一部TE113模侧壁耦合滤波器,实现了四阶椭圆函数特性,仿真结果与实测结果吻合良好。另外,对寄生耦合与简并模式耦合机构之间的关系也进行了深入探讨。