串联式TBCC发动机风车冲压模态性能模拟

建立了基于部件低转速特性匹配的串联式涡轮基组合循环（TBCC）发动机风车冲压模态性能计算模型,提出了压气机低转速大流量特性扩展方法,由换算扭矩代替等熵效率表示旋转部件特性,解决了低转速部件效率不连续相关问题。分析了冲压外涵面积变化和涡轮功率提取对风车冲压模态性能及部件匹配的影响规律,并基于推力、流量连续准则设计了涡轮模态至冲压模态转换过程（含风车冲压模态）的参数调节规律。计算结果表明:在风车冲压模态下,冲压外涵面积变化对风扇工作状态有显著影响,对压气机影响较小;涡轮可提取功率随着风车转速的减小先增加后降低,比冲随提取功率的增加基本呈线性降低趋势,功率提取位置（高、低压涡轮）对部件匹配有显著影响。      

一种阵列天线逐通道相关在线标校法

由于发送端和接收端时钟的不一致性,导致低信噪比下阵列天线卫星移动通信的逐通道相关标校有很大的难度。在考虑易实现性和简易性基础上,提出了一种可以解决低信噪比下通道校正的多周期长时累积方法。该校准信号为由地面标校站产生的BPSK调制扩频信号,可以减少卫星设计的复杂度,且在不中断用户数据传输的基础上实现在线标校。该方法通过对接收信号打标、速率匹配等措施来解决收发时钟不一致导致的码偏和频偏问题。研究结果可以为阵列天线卫星通信技术提供支持。     

An empirical approach to predicting the key parameters for a sunspot number cycle

The common methodologies used to predict the smooth sunspot number (SSN) at peak (Rmax) and the rise time (Tr) for a cycle are noted. The estimates based on geomagnetic precursors give the best prediction of Rmax for five SSN cycles (20–24). In particular, an empirical technique invoking three-cycle quasi-periodicity (TCQP) in Ap index has made accurate predictions of Rmax and Tr for two consecutive SSN cycles (23 and 24). The dynamo theories are unable to account for TCQP. If it endures in the 21st century the Sun shall enter a Dalton-like grand minimum. It was a period of global cooling. The current status of the ascending phase of cycle 24 is described and the delayed reversal of the solar polar field reversal in the southern hemisphere in September 2013 is noted.     

改进高职英语听力教学的策略--兼评2005年6月高等学校英语应用能力听力部分考试

基于2005年6月湖南地区进行的高等学校英语应用能力考试听力理解部分试卷和答卷情况的深入分析,结合实际,讨论反映在教学中的主要问题,并提出如何改进听力理解教学工作的建议。     

船载测控设备远程测试标校系统设计与实现

远洋航天测控事业的不断发展,对测控设备的远程测试标校和故障诊断提出更高的要求。目前。船载测控设备配备了大量的智能测试仪器,为建立船载测控设备自动化测试标校系统提供了有利条件。此外基于PXI总线的虚拟仪器技术的广泛应用,也为未来航天测控设备的自动化测试提供了新途径。本文主要探讨了船载测控设备远程测试标校系统的主要设计思想和实现方式。     

基于CAIV的导弹低成本保障性指标论证技术

利用CAIV技术分别建立反舰导弹的作战效能模型和总拥有费用模型,并以权衡空间为约束条件,以费用最低为目标,建立保障性指标权衡优化模型。该方法可以为导弹武器装备保障性指标论证工作提供必要的理论基础和技术支持。     

基于复合疲劳试验的涡轮叶片振动应力反推法

提出了一种利用复合疲劳试验和外场故障数据反推涡轮叶片实际振动应力的方法.该方法针对与故障叶片同批次的叶片,开展数个振动应力水平下的单件试验和某一特定振动应力水平下的成组试验,利用极大似然法推导出叶片的概率-应力-寿命曲线(P-S-N);最后基于99.87%存活率下的概率-应力-寿命曲(P_99.87%-S-N),结合叶片的外场故障统计结果,反推出叶片实际工作中振动应力的范围和可能的最大振动应力.      

导电滑环检测方法研究

制定了导电滑环检测项目：绝缘电阻、接触电阻、接触电阻变化量、载流量、隔离度、电磁噪声、传输能力,并对各检测项目制定了详细的测试方法,为导电滑环的有效检测奠定了很好的基础。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.