不同密度弹丸对水冰的超高速撞击成坑实验

为了研究冰冻天体表面撞击坑的形成与演化,开展了水冰的超高速撞击成坑实验。使用二级轻气炮发射1.0 mm直径的球形弹丸,以3 km/s、5 km/s和7 km/s速度对圆柱状冰块进行撞击。弹丸材料包括聚碳酸酯和不锈钢两种,冰块温度为253 K。实验观察到了不同弹丸和不同速度条件下,冰块中撞击坑的形貌特征。对撞击坑直径、深度和剖面形状进行了测量,并与文献中铝弹丸对水冰的撞击坑进行了比较分析。获得了水冰撞击坑特征随撞击参数的变化规律,结果表明：撞击坑直径和深度的主导机制不同,坑深主要由弹丸侵彻作用形成,而坑径主要由冰块的剥落所致;坑深比坑径具有更强的对于弹丸密度的依赖性,高密度弹丸撞击坑直径具有比低密度弹丸更强的对于撞击速度的依赖性;撞击坑体积与撞击能量成正比,高密度弹丸形成的撞击坑直径表现出“能量缩比”行为,而低密度弹丸形成的撞击坑直径表现出“动量缩比”行为。     

Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001

We developed a general method for determination of water production rates from groundbased visual observations and applied it to Comet Hale–Bopp. Our main objective is to extend the method to include total visual magnitude observations obtained with CCD detector and V filter in the analysis of total visual magnitudes. We compare the CCD V-broadband careful observations of Liller [Liller, W. Pre-perihelion CCD photometry of Comet 1995 O1 (Hale-Bopp). Planet. Space Sci. 45, 1505–1513, 1997; Liller, W. CCD photometry of Comet C/1995 O1 (Hale-Bopp): 1995–2000. Int. Comet Quart. 23(3), 93–97, 2001] with the total visual magnitude observations from experienced international observers found in the International Comet Quarterly (ICQ) archive. A data set of ∼400 CCD observations covering about the same 6 years time span of the ∼12,000 ICQ selected total visual magnitude observations were used in the analysis. A least-square method applied to the water production rates, yields power laws as a function of the heliocentric distances for the pre- and post-perihelion phases. The average dimension of the nucleus as well as its effective active area is determined and compared with values published in the literature.     

全顺汽车车身涂装底漆线投槽工艺

从配方、操作方法、原理等方面介绍了全顺汽车车身涂装底漆线的投槽工艺。较为详细的介绍了涂装前处理工艺和电泳工艺部分的清洗工序。本文对水质的影响也做了简要的分析。     

关于对喷水室热工计算公式的分析及修正

通过分析喷水室内水和空气之间的热质交换过程，指出目前采用的热工计算公式的不足，并在此基础上推导出喷水室热平衡方程新公式，对理论教学起到一定的指导作用。     

“水”——沈从文人格和文格的象征

文章通过审视沈从文在《湘西》和《湘行散记》中对水的独特感悟,揭示出“外柔内刚”、“善利万物而不争”既是沈从文的人生态度,也是其构筑的“湘西世界”的艺术取向。     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

CO_2激光烧蚀水所形成气蚀空穴机理研究

分析了激光烧蚀液体时形成表面空穴的机理。利用高速相机获得CO2激光烧蚀蒸馏水的流场照片,对空穴的发展过程进行了分析,发现空穴的快速发展期在最初的100μs内,之后在几百μs内保持平衡。用简单模型计算了不同能流密度下,空穴平衡时的形状,并分析了模型的局限性。研究结果对于揭示激光烧蚀水产生推力的机理有重要意义,有利于促进水工质激光推进的发展。     

Wireless Sensor Networks – A potential tool to probe for water on Moon

A Wireless Sensor Network for in situ probing of lunar water/ice is proposed. The mission scenario in single and multi-tier architectures for probing water in a permanently shadowed region of the Moon and different scenarios of exploration are discussed. The ideas presented in the paper are a positive assertion of feasibility for the sensor node hardware, given current levels of technological advancements.     

Development of a gas chromatography compatible Sample Processing System (SPS) for the in-situ analysis of refractory organic matter in martian soil: preliminary results

In the frame of the 2009 Mars Science Laboratory (MSL) mission a new sample preparation system (SPS) compatible with gas chromatography–mass spectrometry (GC–MS) has been developed for the in situ analysis of complex organic molecules in the Martian soil. The goal is to detect, if they exist, some of the key compounds that play an important role in life on Earth including carboxylic acids, amino acids and nucleobases.     

镁基水反应金属燃料的热分解性能

采用热重-差热分析联用(TG-DTA)、差示扫描量热(DSC)、加压热重(PTG)等热分析方法,研究了镁基水反应金属燃料热分解反应的基本特性及其变化规律。研究发现,燃料热分解过程中先后发生AP分解反应、HTPB分解反应,氩气中不发生Mg的氧化反应;添加催化剂、减小AP粒度、增大氧化剂与粘合剂比例、增大细Mg粉含量等,可以降低燃料中AP的分解温度T,减小表观活化能Ea,增大反应速率常数k;减小AP粒度、增大氧化剂与粘合剂比例可以降低燃料中HTPB的分解温度,减小表观活化能Ea,增大反应速率常数k;随着压强增大,AP与HTPB分解失重速率增大、AP失重百分数增大、燃料热分解凝聚相产物质量百分数减少,压强对AP分解影响较大,对HTPB分解影响较小。