Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.     

B2C电子商务中信号机制的建立

首先提出双向信息不对称问题是制约B2C电子商务发展的关键,通过对信号传递理论的研究成果进行归纳,总结出建立B2C电子商务中信号机制需要符合的条件,并建立起B2C中信号机制的模型,即企业传递信号—消费者甄别的信号机制和消费者传递信号—企业甄别的信号机制。     

一种低位作业自动焊接方法--CO2焊与点焊在客车车身制造中的新运用

本文通过介绍一种客车顶盖蒙皮、顶骨架低位作业自动焊接方法,综合CO2气体保护焊和单面双点电阻焊,找出影响期焊接质量的原因及解决方法,以充分发挥其焊接变形小、焊接强度高、节能、高效的特点.     

Evolution of the periodicities in 2S 0114+650

We have analysed 9 years of data from the All Sky Monitor on the Rossi X-ray Timing Explorer for 2S 0114+650 to study the evolution of its spin, binary, and super-orbital periods. The spin history of the neutron star in this system exhibits torque reversals lasting 1 year. The newly discovered super-orbital period has remained stable over the 9-year span, making 2S 0114+650 the fourth known system to exhibit stable super-orbital modulation. We compare its super-orbital period evolution with those of the other three such systems.     

Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness

This article presents the microstructure and hardness variation of an Al–8.5Fe–1.3V–1.7Si(wt%, FVS0812) alloy after selective laser melting(SLM) modification. Three zones were distinguished across the melting pool of the SLM-processed FVS0812 alloy: the laser melted zone(LMZ), the melting pool border, and the heat affected zone(HAZ) in the previously deposited area around the melting pool. Inside the LMZ, either an extremely fine cellular-dendritic structure or a mixture zone of the a-Al matrix and nanoscale Al_(12)(Fe,V)_3Si particles appeared. With a decreased laser beam scanning speed, the cellular-dendritic structure zone within the LMZ shrank significantly while the mixture zone expanded. The a-Al and Al_(12)(Fe,V)_3Si mixture zone was also observed in the HAZ, but another phase, submicron h-Al_(13)Fe_4 particles with rectangular or hexagonal shapes,formed along the melting pool border. Microhardness tests indicated that the hardness of the SLM-processed FVS0812 samples far exceeded that of the as-cast FVS0812 alloy.     

J2项和大气阻力摄动作用下卫星编队构型的演化分析

研究卫星编队构型在J2项摄动和大气阻力摄动作用下的演化进程。从相对运动动力学模型出发,分别加入J2项摄动和大气阻力摄动因素,采用数值积分对所获得的运动方程求解,得到参考星和环绕星在惯性坐标系中的绝对运动规律;将两星的绝对运动规律作差后,利用坐标转换矩阵,将惯性坐标系中两星的相对运动规律转换到Hill坐标系中。由于该方法没有经过任何简化,故研究摄动的影响时不存在误差。最后通过仿真分析,给出了J2项摄动和大气阻力摄动作用下卫星编队构型演化的相关结论,并提出进一步研究的方向。     

模块航天器间激光无线能量传输系统方案设想

模块化航天器是未来航天器发展的重要方向,模块航天器之间的能量传输是实现模块化功能应用的关键技术。文章针对模块化航天器系统能量分配需求,对无线激光能量传输技术进行了研究。阐述了无线激光能量传输系统的功能组成,建立了系统框架模型,分析了系统的关键技术,并对系统各组成模块进行了初步设计。在此基础上对激光传能系统进行了试验验证,获得了理想的光电转换效率。文章的研究成果可为我国模块航天器的发展提供技术支持。     

载人航天器空气环境参数控制非定常仿真分析

为支持乘员在轨驻留,载人航天器需通过空气环境控制系统将众多设计参数和空气环境参数控制在指标范围内。文章建立了一种载人航天器空气环境非定常控制仿真分析模型,包括舱体模块、航天员模块、舱压控制模块、温湿度控制模块以及CO2净化模块。利用该模型分析了载人航天器空气环境参数随乘员代谢水平的非定常变化趋势,并评估了控制系统的工作性能。结果表明:乘员代谢水平变化对空气环境参数有显著影响,通过调节控制系统运行参数可将各空气参数控制在有效指标范围内。人区温度与O2分压、CO2分压和人区湿度有密切的影响关系,不可孤立地进行分析。为载人航天器空气环境参数控制系统的设计和流程改进提供了依据。     

基于LBM-LES方法的多段翼型流场数值模拟

运用Lattice Boltzmann(LB)方法与Large Eddy Simulation(LES)结合的方法数值模拟研究了二维翼型绕流流场,其中,粒子速度模型采用D2Q9模型,松弛时间中对应的湍流粘性系数由Smagorinsky模型计算,网格生成方法采用无网格技术。对NACA0012翼型进行数值模拟,验证其有效性;为进一步研究其模拟复杂物体绕流的能力,以三段翼型30P30N为研究对象进行数值研究,计算出了给定攻角条件下的气动特性,并与实验值进行比较。计算结果表明,LBM-LES方法的计算结果能够与实验值一致,是一种可行、有效且较新的数值模拟方法。     

三维激光成像系统的点云模型真彩色处理方法

三维激光成像系统获得的点云数据精度高并且保有高精度的高程信息,然而特征信息不明显,没有保留全部的点和点的拓扑关系,无法直接判读地面物体;影像数据空间分辨率和精度低,并且缺少高程信息,然而其影像的特征连续,光谱信息丰富.因此,进行点云数据与影像数据融合方法的研究是目前三维激光成像系统研制的前沿性课题.针对点云数据与影像数据融合方法的研究,提出了一种三维激光成像系统点云模型真彩色处理的方法.实验结果显示,采用所提出的方法,不仅能够获得被扫描物体的位置信息和大小信息,而且能够得到被扫描物体的表面纹理细节信息.