TC4钛合金切削中切屑塑性变形分析

对TC4钛合金切削过程中锯齿形切屑形成过程和切削力的关系进行了实验研究,并对锯齿形切屑形成中微观塑性变形区进行了分析。结果表明:当切削速度大于48.75 m/min时,切屑由带状转变为锯齿形。锯齿形切屑的形成导致了切削过程中切削力的波动变化,切削力与切屑的锯齿形变化规律一致,锯齿形切屑形成中塑性变形区的宽度随切削速度的增加而减小。     

Improving performance of macro electrolyte jet machining of TC4 titanium alloy: Experimental and numerical studies

Electrolyte jet machining (EJM) is a promising method for shaping titanium alloys due to its lack of tool wear, thermal and residual stress, and cracks and burrs. Recently, macro-EJM has attracted increasing attention for its high efficiency in machining wide grooves or planes. However, macro-EJM generates large amounts of electrolytic products, thereby increasing the difficulty of rapid product removal with a standard tool and reducing the surface quality. Therefore, for enhanced product transport, a novel tool with a back inclined end face was proposed for macro-EJM of TC4 titanium alloy. For comparison, also proposed were ones with a standard flat end face, a front inclined end face, and both front and back inclined end faces. The flow field distributions of all proposed tools were simulated numerically, and experiments were also conducted to validate the simulation results. The results show that one with a 5° back inclined end face can decrease the low-velocity flow zone in the machining area and increase the high-velocity flow zone at the back end of tool, thereby promoting rapid product removal. A relatively smooth bright-white groove surface was obtained. The same tool also resulted in the highest machining depth and material removal rate among the tested ones. In addition, rapid product removal was beneficial to the subsequent processing. Because of its rapid product removal, the machining depth and material removal rate during deep groove machining using the tool with a 5° back inclined end face were respectively 7% and 14% higher than those produced using a standard one. Moreover, the lowest bottom height difference of 0.027 mm can be obtained when the step-over value was 8.2 mm, and a plane with a depth of 0.285 mm and a bottom height difference of 0.03 mm was fabricated using the tool with a 5° back inclined end face.     

“珠海一号”高光谱数据城市不透水面提取研究

不透水面是评估城市化进程和评价城市环境的重要参考指标，研究城市不透水面的空间覆盖程度对城市生态环境保护、宜居城市建设具有重要意义。本文以“珠海一号”高光谱影像为数据源、珠海市陆域为研究区域，选取支持向量机和随机森林机器学习算法，结合光谱特征，实现城市不透水面信息提取。结果表明：使用“珠海一号”高光谱数据提取不透水面可行性较强，且支持向量机算法更适用于“珠海一号”不透水面提取，总体精度和Kappa系数分别达到92.4%、0.78；基于“珠海一号”高光谱数据进行城市不透水面提取，可为城市规划建设、分析城市土地扩张、评估城市灾害风险提供可靠理论依据和数据支撑。     

宜香1A及宜香品种成熟期倒伏指数研究

以籼型三系不育系宜香1A、Ⅱ-32A、冈46A和恢复系宜恢7633、宜恢7008、宜恢1525等为材料,研究了亲本和杂交后代的倒伏指数.结果表明,Ⅱ-32A的倒3节间抗倒能力极显著强于宜香1A;冈46A倒3节间的抗倒能力显著强于宜香1A;宜香1A和Ⅱ-32A所配品种倒3节间抗倒能力相当,都极显著优于冈46A 所配品种倒3节间抗倒能力.母本及其所配品种的倒2节间和倒1节间倒伏指数无明显差异.