排序方式: 共有87条查询结果,搜索用时 15 毫秒
21.
九自由度运动模拟器相对位置精度分析与指标分解 《空间控制技术与应用》2017,43(5):49-54
摘要: 九自由度运动模拟器是标定航天器交会对接GNC子系统中交会对接光学成像敏感器(CRDS)的关键设备,具有较高的相对位置精度要求.以此为出发点,对影响系统综合指标的误差组成进行系统性分析.梳理各误差分量的关系及相互作用原理,建立误差模型,通过对系统综合指标进行合理的分解与分配,最终使九自由度运动模拟器系统精度达到设计要求. 相似文献
22.
第一代热障涂层(TBCs)由氧化钇部分稳定的氧化锆(YSZ)陶瓷隔热层和金属粘结层组成,该涂层长期使用温度低于1 200℃。随着先进航空发动机向着高推重比发展,迫切要求发展新一代超高温、高隔热热障涂层材料。LaTi2Al9O19(LTA)在1 500℃长期保持相稳定,是一种非常有前景的超高温热障涂层候选材料。本文采用大气等离子喷涂(APS)制备了LTA涂层,研究了喷涂工艺对涂层微观组织结构和热物理性能的影响。结果表明沉积态涂层中含少量的非晶态,在860℃和1 130℃出现晶化峰。等离子喷涂过程中La2O3挥发量较多,导致沉积态涂层中La元素与原始粉末相比含量偏低,而其他组分的化学成分随喷涂功率变化不大。LTA涂层的热扩散系数在1 400℃下为0.3~0.4 mm2·s-1,热导率为1.1~1.6 W·m-1·K-1。1 050℃经过20小时热处理后,得到晶化的涂层在晶化温度范围内的热扩散系数和热导率值均增大。随着喷涂功率减小,涂层孔隙率增加,热导率减小。 相似文献
23.
采用金相分析、硬度测试等技术手段,研究热处理对马氏体不锈钢9Cr13Mo3Co3Nb2V组织和硬度的影响。结果表明:9Cr13Mo3Co3Nb2V经淬火、冰冷处理及多次回火后,残余奥氏体充分转变为回火马氏体,并产生较强的二次硬化效果,进而获得稳定的组织和高的硬度;在350℃以上回火时,由于组织中二次碳化物的析出,开始出现二次硬化倾向,至480~520℃时,回火硬度达到了最大值。 相似文献
24.
By extrapolating to O/H = N/H = 0 the empirical correlations Y–O/H and Y–N/H defined by a relatively large sample of 45 Blue Compact Dwarfs (BCDs), we have obtained a primordial 4Helium mass fraction Y
p=0.2443±0.0015 with dY/dZ=2.4±1.0. This result is in excellent agreement with the average Y
p=0.2452±0.0015 determined in the two most metal-deficient BCDs known, I Zw 18 (Z
/50) and SBS 0335–052 (Z
/41), where the correction for He production is smallest. The quoted error (1) of 1% is statistical and does not include systematic effects. We examine various systematic effects including collisional excitation of hydrogen lines, ionization structure and temperature fluctuation effects, and underlying stellar Hei absorption, and conclude that combining all systematic effects, our Y
p may be underestimated by 2–4%. Taken at face value, our Y
p implies a baryon-to-photon number ratio =(4.7+1.0
–0.8)×10–10 and a baryon mass fraction b
h
2
100=0.017±0.005 (2), consistent with the values obtained from deuterium and Cosmic Microwave Background measurements. Correcting Y
p upward by 2–4% would make the agreement even better. 相似文献
25.
采用推力式接触方式研究了9Cr13Ni6Co5Be钢的接触疲劳性能,获得了不同破坏概率下接触应力与疲劳寿命的关系式,得到了P-S-N曲线。当破坏概率P=0.01,0.05,0.10和0.50时,不同接触应力下的疲劳寿命表达式分别为N=3.0930×1042×S-9.9602、N=2.9196×1039×S-9.0090、N=1.6505×1038×S-8.6133和N=1.0679×1035×S-7.5988,指定疲劳寿命为5×107的疲劳极限分别为S=3112 MPa,3358 MPa,3493 MPa和3950 MPa。 相似文献
26.
27.
人控交会对接九自由度半物理仿真试验系统设计及验证 《空间控制技术与应用》2013,39(4):38-43
以人控交会对接半物理仿真试验需求为背景,提出了可对人控交会对接控制系统单机敏感器性能和控制律设计方案进行仿真验证的人控交会对接九自由度半物理仿真试验系统的设计方法,给出了利用该设计方法对神舟九号飞船人控交会对接控制系统的仿真验证结果.神舟九号飞船与天宫一号目标飞行器首次在轨人控交会对接的工程实践结果表明,人控交会对接九自由度半物理仿真试验系统的设计方法正确. 相似文献
28.
Multi-objective output-feedback control for microsatellite attitude control: An LMI approach 总被引:1,自引:0,他引:1
Mixed H2/H∞ output-feedback controller with pole placement constraints against the internal uncertainty of moment-of-inertia variation and space environmental disturbances is proposed for mircosatellite attitude control. The multi-objective controller is designed based on linear model of attitude dynamics. The H∞ performance takes into account both robustness stability against moments-of-inertia uncertainty and the disturbance rejection aspect. H2 performance takes into account the LQG aspect which avoids the undesirable wheels’ saturation effect. In addition, the closed-loop poles can be forced into some sector of the stable half-plane to obtain well-damped transient responses. The problem is then reduced to a convex optimization involving linear matrix inequalities (LMIs), so it can be efficiently solved. The simulation results demonstrate that the presented mixed H2/H∞ control system is robust stable and optimal in the sense of H2 norm, and has good steady-state and dynamic performances against the parameter uncertainties and various disturbances for the microsatellite attitude control system. 相似文献
29.
30.
Philippe Beaumier Gilles Arnaud Christophe Castellin 《Aerospace Science and Technology》1999,3(8):473-484
The performance prediction of helicopter in hover is of key importance for manufacturers because hover is a design configuration for the definition of a rotorcraft. A lot of effort has been made for more than 10 years all over the world in order to develop and validate numerical methods based on CFD. An Euler method (WAVES) developed by ONERA and coupled with a boundary layer code (MI3DI) is presented, validated and applied to compute the total performance of rotors with different tip shapes. A new boundary condition for the Euler code has been tested and enables better calculation by eliminating ‘numerical' recirculation. The code has demonstrated its ability to rank two rotors with different planforms in good agreement with experiment. Under industrial requirements new grid strategies have been studied and should allow to reduce CPU time consumption. It is shown that WAVES/MI3DI can be efficiently used in the aerodynamic design process of a new rotor. 相似文献