航天ATS快速测试体系结构研究

快速发射是未来空间信息作战和导弹武器发展面临的新课题,快速测试是快速发射的重要环节。航天ATS快速测试需要遵循一定的体系结构而发展。以国际通用测试系统体系结构为背景,结合我国航天测试的需求,提出了航天ATS快速测试体系结构,分析了航天ATS快速测试的测试流程并行化、关键参数连续监测化和测试数据处理快速化等目标,以及所涉及到的图形化程序开发、仪器可互换等关键技术。结论有利于促进航天ATS快速测试技术的进步,并为其发展提供参考。     

舵机滚珠丝杠在内部热源作用下响应特性

舵机滚珠丝杠在运行过程中由于摩擦作用和电机运行产生的内部热源会导致其结构温度上升和变形,是影响滚珠丝杠副运行精度的因素之一。本文基于有限元理论建立舵机滚珠丝杠副模型,并通过在ANSYS Workbench中插入命令流的方式实现了在滚珠丝杠上施加移动摩擦热载荷,获得了滚珠丝杠副在内部热源作用下的温度、变形和应力响应特性。结果表明:滚珠丝杠轴向热流密度呈双峰趋势,且其高温区域主要集中在螺母行程范围内的中间区域;随着转速的增加,滚珠丝杠各处温度及其波动幅度加大;丝杠最大热应力位于与轴承配合的轴肩最外侧处。     

起落架结构参数对飞机机轮摆振频率特性的影响

研究了四个起落架结构参数：稳定距、机轮转动惯量、支柱侧倾刚度和减摆器传动系统扭转刚度对飞机机轮摆振频率特性的影响。对“轮胎型”摆振和“结构型”摆振进行了严格区分并分别予以研究,针对所计算的型号飞机,归纳总结出发生“轮胎型”摆振和“结构型”摆振的频率范围。所得结论为新机防摆设计和现役飞机防摆维护提供了理论依据。     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.     

TRANSIENT RESPONSE INVESTIGATION OF GIMBALLED TILTROTORS DURING ENGAGE AND DISENGAGE OPERATIONS

Ｕｎｉｑｕｅａｎｄｏｆｔｅｎｈａｚａｒｄｏｕｓｃｏｎｄｉｔｉｏｎｓａｒｅｅｎｃｏｕｎｔｅｒｅｄｗｈｅｎｒｏｔｏｒｃｒａｆｔａｒｅｏｐｅｒａｔｅｄｆｒｏｍｓｈｉｐｂａｓｅｄｐｌａｔｆｏｒｍｓ．Ｏｎｅｏｆｔｈｅｍｏｒｅｔｒｏｕｂｌｅｓｏｍｅｒｏｔｏｒｃｒ...     

飞机纵向驾驶员诱发振荡灵敏度分析

采用系统灵敏度理论，以修正的带宽准则，增益和相位裕度准则以及Ｎｅａｌ－ｓｍｉｔｈ准则等飞机纵向驾驶员诱发振荡（ＰＩＯ）预测准则作为系统指标，建立了参数变化对诱发振荡预测指标影响的灵敏度公式，以ＪＪ７飞机为例，给出了飞机，操纵系统及驾驶员参数上述指标影响的灵敏度，根据计算结果进行了ＰＩＯ参数敏度预测分析，同时与数值仿真结果进行了对比分析。     

小波技术在组合导航系统故障诊断中的应用

针对组合导航系统中存在的故障类型和特点，提出一种新的基于信号处理的故障检测方法。该方法利用小波分析技术对含有故障信息的系统信号进行分析处理，并将此方法应用于SINS／GPS组合导航系统。仿真结果分析表明，小波分析技术能很好地及时检测出组合导航系统的硬故障，且更加简便灵活，从而可以将小波分析技术应用于组合导航系统的故障检测。     

对建立工业快速动员体系的探讨

本文介绍了美国快速动员体系的基本情况，对建立我国的快速动员体系提出了几点建议。     

Innovation and change? The evolution of Europe's small satellite manufacturers

Since the 1980s a trend has emerged to contain the cost of space missions, which has favored trials in the construction and launch of small satellites. This effort has considerably reduced the cost of the satellites because the construction process uses both traditional components and important technological innovations. There have also been market openings for small satellites, both within the telecommunication sector and for scientific missions and those related to Earth observation. This paper contains the results of a survey of the largest manufacturers of small satellites in Europe and investigates how far (if at all) they have changed the structure of the European space industry. It finds that, through the acquisition of small satellite manufacturers, traditional large companies operating in the field of space in Europe have secured for themselves important technological innovations and market opportunities, while maintaining their oligopolistic position.