大功率舰船燃气轮机压气机增容模化设计研究

某重点项目的船用燃气轮机领域提出了更高等级功率燃气轮机的要求。为了在研制周期内快速设计一型压气机,以现有机型为母型机进行模化设计,在母型机特性图上合理选择模化点,确定模化比,得到增容后模化机的叶片和几何通流结构,划分网格时,充分考虑叶顶间隙、倒角、引气孔、梳齿密封等,以更接近于工程实际情况,对模化机进行全三维数值模拟计算,结果表明,模化机设计点性能指标达到要求,非设计工况喘振裕度基本与母型机相同,模化后叶顶相对间隙的降低会带来阻塞点流量的升高、失速点流量的降低,导致低转速下喘振裕度的升高和高转速下喘振裕度的降低。总体来说,模化增容设计继承了母型机优良的气动性能,为快速、高效研发新机型提供宝贵经验。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

多品种变批量产品智能制造系统框架

YU Chenglong;HOU Junjie;ZHAO Ying;XU Hao;ZHANG Wei(China Aerospace Academy of Systems Science and Engineering, Beijing 100048, China)     

航天材料工程学内涵及其体系构建

为应对空间特殊服役环境,航天材料研制、保证和使用单位已在材料设计、材料加工、材料评价和材料使用方面开展了大量工作。在此基础上,本文首先对我国航天材料的选型要求进行了分析,接着对航天材料、航天材料飞行试验、空间材料科学、航天材料空间环境适应性等概念进行了辨析,并提出了航天材料工程学的概念,进而对航天材料工程的各个组成部分的关联性进行了阐述。最后,为满足未来空间技术发展需求,在总结和借鉴国内外航天材料工程发展经验的基础上,从规划、研发、试(实)验、评价、选用、数据服务等角度,设计构建了具有航天领域特色的航天材料工程体系。     

航空发动机制造仿真数据管理集成应用系统实现

基于航发集团工程数据中心协同、共享环境,结合航空发动机制造仿真业务特点和需求,构建了制造仿真数据管理集成应用系统,涵盖了制造仿真结果数据管理、仿真数据定义和管理、仿真资源库管理、数据协同等方面的业务功能,面向航空发动机制造仿真数据的统一管理、协同共享进行了有益的探索。     

Testing the three-dimensional IRI-SIRMUP-P mapping of the ionosphere for disturbed periods

This paper describes the three-dimensional (3-D) electron density mapping of the ionosphere given as output by the assimilative IRI-SIRMUP-P (ISP) model for three different geomagnetic storms. Results of the 3-D model are shown by comparing the electron density profiles given by the model with the ones measured at two testing ionospheric stations: Roquetes (40.8°N, 0.5°E), Spain, and San Vito (40.6°N, 17.8°E), Italy. The reference ionospheric stations from which the autoscaled foF2 and M(3000)F2 data as well as the real-time vertical electron density profiles are assimilated by the ISP model are those of El Arenosillo (37.1°N, 353.3°E), Spain, Rome (41.8°N, 12.5°E), and Gibilmanna (37.9°N, 14.0°E), Italy. Overall, the representation of the ionosphere made by the ISP model is better than the climatological representation made by only the IRI-URSI and the IRI-CCIR models. However, there are few cases for which the assimilation of the autoscaled data from the reference stations causes either a strong underestimation or a strong overestimation of the real conditions of the ionosphere, which is in these cases better represented by only the IRI-URSI model. This ISP misrepresentation is mainly due to the fact that the reference ionospheric stations covering the region mapped by the model turn out to be few, especially for disturbed periods when the ionosphere is very variable both in time and in space and hence a larger number of stations would be required. The inclusion of new additional reference ionospheric stations could surely smooth out this concern.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

高准确度惯性测量装置全温测试系统的校准

阐述了高准确度捷联惯性测量装置全温测试系统的校准测试方法。通过对软硬件进行校准测试,验证了该系统可以完成不同种类的惯性测量装置误差建模和综合测试。     

93k集成电路测试系统校准原理及实现方法研究

介绍了93k集成电路测试系统校准原理与实现方法,讨论了校准过程中的量值传递关系;以HPP-MU为例,给出了量值传递的实现过程,并分析了93k校准原理与方法在确保量值准确、一致性上的优点。     

基于GNSS的高轨卫星定位技术研究

利用全球卫星导航系统(GNSS)进行导航定位具有全球、全天候、实时和高精度的优点,应用于高地球轨道(HEO)卫星的定位,能够提供精确的轨道和姿态确定,并且可以克服目前主要利用地面测控系统对HEO卫星进行定位的设备复杂、投资高等缺点,使得自主导航成为可能.本文对利用GNSS的高轨卫星定位相关技术进行了研究,分析了单一GNSS系统和多个GNSS组合系统的卫星可见性、动态性和几何精度因子(GDOP).通过仿真分析表明,利用组合GNSS系统并通过提高GNSS接收机灵敏度的方法,可以解决GNSS进行HEO卫星定位的相关问题,并能保证HEO卫星定位精度的要求.