射频制导导弹全自动综合测试系统

介绍用于射频制导导弹全自动综合测试系统的设计方法，论述系统测试功能及实现的关键技术，通过举例阐述系统应用软件设计。该系统从方案入手，提出并解决了几个关键技术，从而保证整个系统研制的质量，同时应用了若干项新技术，体现了系统设计的先进性。系统成功实现了对导弹全自动综测。试验表明，该系统集成方法先进，自动化程度高，性能稳定可靠，为系统实现导弹故障诊断目标打下了坚实的基础。     

大口径甚高分辨率空间光学遥感器技术途径探讨

增长焦距、加大口径是提高空间光学遥感器空间分辨率的主要手段,但焦距和口径的增大意味着遥感器体积、研制难度和制造成本的骤增。要达到可见光甚高分辨率,采用传统的设计思想和制造工艺已无法实现,更何况体积和质量巨大也难以发射。本文介绍和分析了几种解决大口径系统的方案,包括:分块可展开成像系统、稀疏孔径系统和干涉成像系统。     

自适应模糊逻辑系统的PID型梯度学习算法研究

在建立模糊逻辑系统的一般数学模型后，利用PID控制系统理论，推出一种学习算法对系统进行训练，仿真结果表明利用此方法可使系统误差收敛速度大大加快。     

Survey of mission evolution and flexibility in the Space Shuttle program

Given the diversity of missions it has accomplished and the myriad of adaptations it has undergone, the US Space Shuttle is widely regarded as a highly flexible space vehicle. With the Shuttle’s upcoming 2011 retirement, it is instructive to survey the history of this vehicle’s flexibility for the insights it can provide to the design and characterization of flexibility in future space systems. Data are presented on the evolution of mission requirements over time for 120 missions performed by the Space Shuttle over a period of some 27 years. Distinct trends in the time domain – as well as their causes – are identified and discussed, and early manifest plans from 1982 serve as a confirmation that these trends were not originally anticipated. Eight examples are then presented of engineering modifications that allowed the Shuttle to adapt and accommodate these requirement changes. Several additional instances of Shuttle flexibility are explored, such as post-Columbia disaster modification, upgrade programs and derived vehicles, and one case in which flexibility was inhibited by an early design decision.     

多惯性仪表冗余系统测量数据的预处理

介绍了多惯性仪表冗余惯性测量系统数据融合前的测量异常值去除、系统误差修正和一致性检验的基本方法。针对测量数据一致性检验,讨论了置信距离测度和信任度函数两种处理方法。仿真结果表明后者能更好地确定一致性的惯性仪表测量数据。     

卫星导航进近技术进展

全球卫星定位系统（GNSS）增强系统能提供全天候无间断的卫星导航信号，可以辅助飞机进行进近。本文介绍了全球卫星导航系统进近着陆系统的基本组成、工作原理和功能特点，并对国内外研究进展进行了阐述。针对GNSS进近研究中的热点问题，重点论述了地基增强系统（GBAS）、星基增强系统（SBAS）、用户自主完好性监测（RAIM）等技术的发展现状，指出了GNSS进近技术实际工程应用仍然存在的问题，探讨了GNSS进近技术未来的发展方向。     

End-to-end validation process for the INTA-Nanosat-1B Attitude Control System

This paper describes the end-to-end validation process for the Attitude Control Subsystem (ACS) of the satellite INTA-NanoSat-1B (NS-1B). This satellite was launched on July 2009 and it has been fully operative since then. The development of its ACS modules required an exhaustive integration and a system-level validation program. Some of the tests were centred on the validation of the drivers of sensors and actuators and were carried out over the flying model of the satellite. Others, more complex, constituted end-to-end tests where the concurrency of modules, the real-time control requirements and even the well-formedness of the telemetry data were verified. This work presents an incremental and highly automatised way for performing the ACS validation program based on two development suites and an end-to-end validation environment. The validation environment combines a Flat Satellite (FlatSat) configuration and a real-time emulator working in closed-loop. The FlatSat is built using the NS-1B Qualification Model (QM) hardware and it can run a complete version of the on-board software with the ACS modules fully integrated. The real-time emulator, running on an industrial PC, samples the actuation signals and emulates the sensors signals to close the control loop with the FlatSat. This validation environment constitutes a low-cost alternative to the classical three axes tilt table, with the advantage of being easily configured for working under specific orbit conditions, in accordance with any of the selected tests. The approach has been successfully applied to the NS-1B in order to verify different ACS modes under multiple orbit scenarios, providing an exhaustive coverage and reducing the risk of eventual errors during the satellite's lifetime. The strategy was applied also during the validation of the maintenance and reconfiguration procedures required once the satellite was launched. This paper describes in detail the complete ACS validation process that was performed and it shows the most relevant errors detected and fixed during testing. Finally it summarises some of the most significant conclusions.     

以主轴系统刚度与总功耗之比值为目标函数的液体静压轴承优化设计方法

本文介绍以主轴系统刚度与总功耗之比值最大比值最大为目标函数、主轴系统刚度的校验准则为主要约束条件的液体静压轴承优化设计方法，与普通设计方法相比，两种不同结构液体静压承经优化设计后，其单位总功耗的主轴系统刚度都成倍增加。     

Solar Nebula Magnetohydrodynamics

The dynamical state of the solar nebula depends critically upon whether or not the gas is magnetically coupled. The presence of a subthermal field will cause laminar flow to break down into turbulence. Magnetic coupling, in turn, depends upon the ionization fraction of the gas. The inner most region of the nebula (≲0.1 AU) is magnetically well-coupled, as is the outermost region (≳10 AU). The magnetic status of intermediate scales (∼1 AU) is less certain. It is plausible that there is a zone adjacent to the inner disk in which turbulent heating self-consistently maintains the requisite ionization levels. But the region adjacent to the active outer disk is likely to be magnetically ``dead.' Hall currents play a significant role in nebular magnetohydrodynamics. Though still occasionally argued in the literature, there is simply no evidence to support the once standard claim that differential rotation in a Keplerian disk is prone to break down into shear turbulence by nonlinear instabilities. There is abundant evidence—numerical, experimental, and analytic—in support of the stabilizing role of Coriolis forces. Hydrodynamical turbulence is almost certainly not a source of enhanced turbulence in the solar nebula, or in any other astrophysical accretion disk. This revised version was published online in June 2006 with corrections to the Cover Date.     

关于角度量列为基本量的探讨

在SI国际单位制中,平面角是导出量,平面角的单位“弧度”是辅助单位。但是,平面角既不能由长度基本单位导出,又不能溯源至长度基本单位,因此不能确立导出关系。平面角应用广泛,作用重要,具有独特的性能,符合基本量的要求,因此提出：平面角,简称“角度”,是基本量;平面角的单位“度、（角）分、（角）秒”,是基本单位,以供探讨。