飞机结构修理手册编制研究

首先介绍了飞机结构修理手册的编制要求和编制依据,其次分别阐述了依据ATA2200和S1000D标准进行飞机结构修理手册编写的方法,最后比较两种标准的特点,并对大型客机结构修理手册的编制工作提出了初步建议。     

An experimental study of elastic properties of dragonfly-like flapping wings for use in biomimetic micro air vehicles (BMAVs)

This article studies the elastic properties of several biomimetic micro air vehicle (BMAV) wings that are based on a dragonfly wing. BMAVs are a new class of unmanned micro-sized air vehicles that mimic the flapping wing motion of flying biological organisms (e.g., insects, birds, and bats). Three structurally identical wings were fabricated using different materials: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and acrylic. Simplified wing frame structures were fabricated from these materials and then a nanocomposite film was adhered to them which mimics the membrane of an actual dragonfly. These wings were then attached to an electromagnetic actu-ator and passively flapped at frequencies of 10–250 Hz. A three-dimensional high frame rate imag-ing system was used to capture the flapping motions of these wings at a resolution of 320 pixels × 240 pixels and 35000 frames per second. The maximum bending angle, maximum wing tip deflection, maximum wing tip twist angle, and wing tip twist speed of each wing were measured and compared to each other and the actual dragonfly wing. The results show that the ABS wing has considerable flexibility in the chordwise direction, whereas the PLA and acrylic wings show better conformity to an actual dragonfly wing in the spanwise direction. Past studies have shown that the aerodynamic performance of a BMAV flapping wing is enhanced if its chordwise flexibility is increased and its spanwise flexibility is reduced. Therefore, the ABS wing (fabricated using a 3D printer) shows the most promising results for future applications.     

Evidence of Element Diffusion Inside the Sun and the Stars and its Consequences on the Lithium Primordial Abundance

The process of element segregation in stars (also called "microscopic diffusion") has to be introduced in all computations of stellar structure to obtain consistent models. Although recognized by the pioneers of stellar physics, this process has long been forgotten, except for white dwarfs and for the so-called "chemically peculiar stars". More recently helioseismology has given evidence that this process occurs in the Sun, and leads to helium and heavier element depletion by about 20 percent. Some macroscopic motions (mild mixing) must also occur below the convection zone in order to account for the lithium depletion. These motions do not prevent the segregation : they only slightly smooth the abundance gradients. These results are presented here and the connexion with the 3He abundance is discussed. The importance of these processes for Pop II stars is also developped.     

软件构架技术在网管系统中的应用

软件构架技术是软件复用的一种重要方式，软件构架是研究如何快速，可靠地应用可复用构件进行系统构造，着重于软件系统自身的整体结构和构件间的互联，在特定领域中运用软件构架技术开发应用系统有非常重要的现实意义。本文通过对网管系统性能数据处理平台的设计，来说明软件构架技术在应用系统开发中的实现方法和步骤。     

三元催化转化器在汽车尾气净化中应用

汽车尾气治理是当前我国环保部门和汽车行业一项十分迫切的任务，控制有害气体的排放，将有害气体转化为无害气体的有效措之一就是采用三元催化转化器，本文论述了三元催化转化器的原理及工作过程分析，构造，应用前景等。     

民营企业制度创新的探讨

制约民营企业发展最根本的因素是制度。针对民营企业存在的制度缺陷，文章从产权制度、经营制度和管理制度三个方面阐述了民营企业的制度创新。     

辽宁省大力发展非公有经济、改善所有制结构的法制构建

针对辽宁省非公有经济发展和所有制结构调整所涉及的法律政策问题进行了研究，运用比较分析和系统的方法，对辽宁省巩固公有制经济的主体地位、大力发展非公有制经济和促进公有制经济与非公有制经济的共同发展的三个宏观问题进行了法律制度的建构，并从中提出了一些具体的立法建议。     

优秀人才是飞机结构设计创新的源动力

根据未来先进战斗机发展的需要和飞机设计队伍的现状，指出了培养优秀飞机人才的紧迫性。论述了优秀飞机结构设计师应具备的基本素质、知识结构和专业技能。提高了改革人才培养机制，激励人才成长的建议。     

论我国高师矩阵结构课程体系的有效性

本从结构、课程设置和课程内容等方面分析了我国高师现行课程体系存在的缺陷，进而提出横向模块、纵向两系列的高师矩阵结构课程体系的基本思路和组成框架。重点从理论上实践上的合理性和统一性等方面分析了矩阵结构课程体系的有效性。     

电镀Ni-Sn合金热处理前后的组织和性能

分析了电镀Ni-Sn合金各种镀层的镀态组织和加热时组织的转变机理,并对镀层的耐磨性、耐蚀性进行了对比实验.结果表明,镀态组织主要由亚稳相αNi(M)和NiSn(M)组成,高Sn时出现平衡相Ni3Sn4和βSn;加热时随着温度升高,亚稳相逐渐向平衡相转变,在一定的温度下由于平衡相弥散析出,使镀层硬度升高;单相NiSn(M)组织耐强氧化性介质能力比不锈钢稍差,当加热到400℃时耐磨性优于中碳钢淬火.