土木工程相关的台风近地风场实测研究

采用三维超声风速仪现场观测了台风"珍珠"和"派比安"的登陆过程,分析了两次台风过程的平均风速、风向变化历程以及台风脉动风速的概率密度分布,进一步研究了台风湍流强度、湍流积分尺度与阵风因子.结果表明:在低风速情况下,台风脉动风速接近正态分布,湍流强度与阵风因子存在近似线性关系,可用相关经验公式进行拟合。两次台风过程实测风速谱均可与某种理论谱模型较好吻合,通过拟合可以降低实测谱与理论谱的偏差。     

考虑喷注流强分布的纵向稳定性建模与分析

喷注器流强分布是除声学阻尼装置以外使液体火箭发动机稳定工作的重要措施,通过控制喷注流强分布使推进剂的燃烧尽量远离主要振型的波腹区,减少热声耦合振荡的能量源,从而达到抑制高频振荡的效果。因此,建立喷注流强分布与稳定性之间的综合分析模型,研究流强分布的不稳定性抑制特性具有重要实际意义。针对采用自击式喷嘴器、液滴蒸发作为燃烧速率控制过程的某自燃推进剂缩尺燃烧室高频纵向燃烧不稳定问题,近似采用蒸发速率峰值区代替集中燃烧释热区,引入燃烧室三维声学控制方程以考虑多喷嘴条件下燃烧响应空间分布,建立了针对喷注器流强分布条件下的高频纵向燃烧稳定性分析模型,并对喷注流强的稳定性抑制特性进行了分析,给出了不同分布流强下燃烧室一阶纵向信号的增长率变化规律。研究表明,喷注流强分布有利于燃烧室稳定,"驼峰区"喷注孔径的增大对改善高频纵向不稳定性更为显著,"驼峰区"流强增加30%,相应的增长率降低15%。     

自锁型重物提升机构在生产中的应用

针对生产中重物产品,半成品物流,包装过程中提升困难的问题,提出了自锁型重物提升机构,以达到节能,降低运行成本,降低劳动强度的目的.     

静止轨道卫星在轨温度参数变化规律研究

分析了静止轨道在轨三轴稳定卫星各面上温度参数的变化规律,并通过理论计算得到卫星各面上光强的变化曲线,研究了温度参数变化与对应面上光强的关系,建立了温度参数与光线的线性模型,结果表明模型与实际数据能较好地吻合,对温度参数的预测以及故障的判断具有一定的参考价值.     

总压畸变在三级轴流压气机中的传递性能研究

介绍了一种计算进气畸变的方法.通过求解非稳态三维欧拉方程,计算压气机各截面气流参数分布.以74A三级压气机为例,进行了周向总压畸变传递特性计算,得到了压气机进口存在总压畸变时总压、静压、总温和流量系数在各截面上的分布规律,得出了畸变强度、畸变范围和畸变位置在轴向上的分布规律.      

Research on the Plane Multiple Cracks Stress Intensity Factors Based on Stochastic Finite Element Method

Taylor stochastic finite element method (SFEM) is applied to analyze the uncertainty of plane multiple cracks stress intensity factors (SIFs) considering the uncertainties of material properties, crack length, and load. The stochastic finite element model of plane multiple cracks are presented. In this model, crack tips are meshed with six-node triangular quarter-point elements; and other area is meshed with six-node triangular elements. The partial derivatives of displacement and stiffness matrix with respect to all the random variables obtained by Taylor SFEM are derived. Meanwhile, the mean and variance expressions of SIF under uncertain factors are also derived. Parallel double-crack illustrative example of using the proposed method is given. The calculation results indicate that the uncertainty of SIF is influenced by the distance of the cracks, the smaller the distance of cracks is, the greater the SIF uncertainty is, and the uncertainties of material elastic modulus, load and crack length markedly affect the uncertainty of SIF; and the Poisson ratio of material has little influence. Among the variables, the elastic modulus has the greatest effect on SIF uncertainty. The next is external load. The crack length has lower effect on SIF uncertainty than both the elastic modulus and external load.     

固体火箭发动机药柱表面裂纹分析

为了分析含表面裂纹的固体火箭发动机药柱在温度、燃气内压与轴向过载联合作用下的扩展情况,在固体火箭发动机的危险截面上沿危险方向预设表面裂纹。采用有限元方法,在裂纹尖端构建三维奇异裂纹元,模拟裂纹扩展,分别计算随着裂纹扩展所对应裂纹深度的应力强度因子,得到了应力强度因子随裂纹深度的变化规律。根据应力强度因子的变化规律,探讨了发动机药柱裂纹扩展的趋势。     

配置点谱方法求解非均匀介质内辐射传热问题

发动机内的燃气等高温介质随着组分和浓度的变化，会引起折射率在空间上的非均匀分布，从而导致辐射能束沿着曲线传播，其相应的辐射传热过程也更为复杂。为了避免射线追踪方法的复杂计算、提高计算效率，本文提出了配置点谱方法求解二维非均匀介质内辐射传热问题。在求解过程中，角向采用离散坐标法处理，空间采用配置点谱方法处理。通过将三种非均匀介质内辐射传热问题的配置点谱方法结果与文献结果进行对比分析，发现配置点谱方法可以在较少的节点数下，获得准确、有效地计算结果。并且，采用配置点谱方法求解三种算例的计算时间均消耗较少，均在20分钟以内。这将为进一步开展发动机复杂结构内高温燃气辐射快速仿真提供基础。     

两共线半无限裂纹板的弯曲问题

研究两共线半无限裂纹板的弯曲问题，应用Ｓｃｈｗａｒｚ对称原理和复应力函数的奇异性分析，将问题化为全纯函数的“联结问题”，求得了问题的封闭形式解和应力强度因子公式，并通过与有限元结果比较，说明了它们的工程实用价值。     

Low light intensity effects on the growth,photosynthetic characteristics,antioxidant capacity,yield and quality of wheat (Triticum aestivum L.) at different growth stages in BLSS

Minimizing energy consumption and maximizing crop productivity are major challenges to growing plants in Bioregenerative Life Support System (BLSS) for future long-term space mission. As a primary source of energy, light is one of the most important environmental factors for plant growth. The purpose of this study is to investigate the effects of low light intensity at different stages on growth, pigment composition, photosynthetic efficiency, biological production and antioxidant defence systems of wheat (Triticum aestivum L.) cultivars during ontogenesis. Experiments were divided into 3 intensity-controlled stages according to growth period (a total of 65 days): seedling stage (first 20 days), heading and flowering stage (middle 30 days) and grain filling stage (last 15 days). Initial light condition of the control was 420 μmol m⁻² s⁻¹ and the light intensity increased with the growth of wheat plants. The light intensities of group I and II at the first stage and the last stage were adjusted to the half level of the control respectively. For group III, the first and the last stage were both adjusted to half level of the control. During the middle 30 days, all treatments were kept the same intensity. The results indicated that low-light treatment at seedling stage, biomass, nutritional contents, components of inedible biomass and healthy index (including peroxidase (POD) activity, malondialdehyde (MDA) and proline content) of wheat plants have no significant difference to the control. Furthermore, unit kilojoule yield of group I reached 0.591 × 10⁻³ g/kJ and induced the highest energy efficiency. However, low-light treatment at grain filling stage affected the final production significantly.