加热器在冲压发动机试验技术中的应用研究

直连试验技术是冲压发动机研究中一项非常关键的技术,论证分析了如何模拟直连试验模型进口流量、总温及总压等关键参数,并以此为基础研制了一种高室压、大流量及耐高温的空气加热器,通过对该加热器和试验台相关组件的试验研究,结果表明以空气、氧气及煤油组织燃烧的加热器工作性能良好,解决了冲压发动机直连试验这项关键技术。     

一种数字接收机中DLL的设计

延迟锁定环(DLL)是扩频接收机中实现PN码捕获和跟踪的一个重要部分,文中讨论延迟锁定环的数字化实现。介绍延迟锁定环的经典结构、数控振荡器、伪码发生器、鉴别器、环路滤波器四个模块的工作原理以及在可编程器件中的设计和环路滤波器的参数设计,最后给出实验结果。     

国外GAP推进剂研制现状

综述了缩水甘油叠氮聚醚(GAP)及其推进剂的热、力学及弹道性能,GAP推进剂有较高的燃速和能量,但其燃速压强指数和温度敏感系数偏高。GAP推进剂的力学性能较差,改性GAP和支化GAP更具吸引力。GAP推进剂可用于燃气发生剂、微烟推进剂、高能推进剂及改性双基推进剂。     

基于AD9850的逐赫兹可调信号发生器

针对频率变换器与同步器的测试过程繁杂这一问题 ,提出了以 AD985 0频率合成器为基础的逐赫兹可调的高精度信号发生器。此信号发生器以单片机为控制核心 ,用液晶模块显示频率 ,可发生正弦波与方波。在得到需要的信号后 ,讨论分析了稳定频率与改善方波波形的方法。     

Working processes in the solid-propellant low-temperature aerosol generator with an inert heatexchanger

Alignment charts that make it possible to select a standard size of inert heatexchanger structures with specified output characteristics and a developed scheme of the low-temperature aerosol generator are presented.     

A high-fidelity design methodology using LES-based simulation and POD-based emulation: A case study of swirl injectors

Engineering design is undergoing a paradigm shift from design for performance to design for affordability, operability, and durability, seeking multi-objective optimization. To facilitate this transformation, significantly extended design freedom and knowledge must be available in the early design stages. This paper presents a high-fidelity framework for design and optimization of the liquid swirl injectors that are widely used in aerospace propulsion and power-generation systems. The framework assembles a set of techniques, including Design Of Experiment (DOE), high-fidelity Large Eddy Simulations (LES), machine learning, Proper Orthogonal Decomposition (POD)-based Kriging surrogate modeling (emulation), inverse problem optimization, and uncertainty quantification. LES-based simulations can reveal detailed spatiotemporal evolution of flow structures and flame dynamics in a high-fidelity manner, and identify important injector design parameters according to their effects on propellant mixing, flame stabilization, and thermal protection. For a given a space of design parameters, DOE determines the number of design points to perform LES-based simulations. POD-based emulations, trained by the LES database, can effectively explore the design space and deduce an optimal group of design parameters in a turn-around time that is reduced by three orders of magnitude. The accuracy of the emulated results is validated, and the uncertainty of prediction is quantified. The proposed design methodology is expected to profoundly extend the knowledge base and reduce the cost for initial design stages.     

飞行仿真中的机动生成器

讨论了作为数字飞行仿真计算中的关键环节的轨迹跟踪和指不乔量两种机动生成器的原理与应用，并根据常赠模型他机动生成器设计参数的选取问题，机动生成器由于采用统一的比例－积分－微分（ＰＩＤ）反馈形式，简化并改进了以往数字飞行仿真中有关环节的处理，在使用中具有良好的效果。     

Design and numerical investigation of swirl recovery vanes for the Fokker 29 propeller

Swirl recovery vanes（SRVs） are a set of stationary vanes located downstream from a propeller, which may recover some of the residual swirl from the propeller, hoping for an improvement in both thrust and efficiency. The SRV concept design for a scaled version representing the Fokker 29 propeller is performed in this paper, which may give rise to a promotion in propulsive performance of this traditional propeller. Firstly the numerical strategy is validated from two aspects of global quantities and the local flow field of the propeller compared with experimental data, and then the exit flow together with the development of propeller wake is analyzed in detail.Three kinds of SRV are designed with multiple circular airfoils. The numerical results show that the swirl behind the propeller is recovered significantly with Model V3, which is characterized by the highest solidity along spanwise, for various working conditions, and the combination of rotor and vane produced 5.76% extra thrust at the design point. However, a lower efficiency is observed asking for a better vane design and the choice of a working point. The vane position is studied which shows that there is an optimum range for higher thrust and efficiency.     

温度畸变发生器研制

介绍了航空发动机温度畸变试验装置的工作原理、设计技术要求、主要设备以及用涡喷和涡扇发动机调试和对比试验的结果。调试结果证明：该装置具有高的工作可靠性、可控性和稳定性,高温区平均温升值可达10－400K,绝对温升率可达300－5500K/s,可用于空气流量为30－150kg/s各类燃气涡轮发动机的温度畸变试验。     

多(全)电发动机

简要介绍了磁性轴承、整体式起动／发电机和燃气涡轮发动机分布式控制系统的工作原理、发展状况和关键技术。