进气压力畸变对某三级风扇流场的影响

介绍了在某三级风扇上进行的固定式插板畸变试验，并详细分析了进气压力畸变对进、出口稳态压力和温度的影响。同时，采用频域和幅值域分析方法对脉动压力进行了分析，给出了脉动压力功率谱密度、幅值概率密度和自相关、互相关分析。     

Banach空间中算子余弦函数的一个特征

本文主要研究Ｂａｎａｃｈ空间中算子余弦函数与二阶无阻尼方程的Ｃａｕｃｈｙ问题之间的某些关系,借助于此类Ｃａｕｃｈｙ问题的解的存在性与唯一性,给出算子余弦函数无穷小生成元的不同于Ｈｉｌｅ－Ｙｏｓｉｄａ型特征的另一个特征。     

基于电力综合集成的多绕组双流发电机技术分析

为解决采用传统发电机的移动电站输出电源种类单一,而采用多台发电机又会造成底盘过载影响机动性的问题,文章基于电力综合集成技术,分析研究实现发电机的双流发电的关键技术,突破发电机多绕组发电及励磁解耦等难题,减小了电机体积、降低了电机重量,有利于移动电站的多功能化与小型化设计。     

Experimental investigations of the spray structure and interactions between sectors of a double-swirl low-emission combustor

In this paper, the spray characteristics of a double-swirl low-emission combustor are analyzed by using Particle Imaging Velocimetry (PIV) and Planar Laser Induced Fluorescence (PLIF) technologies in an optical three-sector combustor test rig. Interactions between sectors and the influence of main stage swirl intensity on spray structure are explained. The results illustrate that the swirl intensity has great effect on the flow field and spray structure. The spray cone angle is bigger when the swirl number is 0.7, 0.9 than that when the swirl number is 0.5. The fuel distribution zone is larger and the distribution is more uniform when the swirl number is 0.5. The fuel concentration in the center area of the center plane of side sector (Plane 5) is larger than that of the center plane of middle sector (Plane 1). The spray cone angle in Plane 5 is larger than that in Plane 1. The width of spray cone becomes larger with the increase of Fuel–Air Ratio (FAR), whereas the spray cone angle under different fuel–air ratios are absolutely the same. The results of the mechanism of spray organization in this study can be used to support the design of new low-emission combustor.     

考虑滑流影响的埋入式进气道气动特性分析与流动控制研究

研究滑流对埋入式进气道性能的影响机理对于发动机的稳定性具有重要意义。针对某型涡桨发动机 滑油散热器进排气道系统,基于 CFD技术建立系统的螺旋桨滑流与滑油散热器内流一体化数值模拟方法,进 行考虑滑流影响的滑油散热系统埋入式进气道气动设计仿真分析;针对埋入式进气道由于吸入边界层低能气 流导致通过散热器流量低的问题,设计4组涡流发生器进行主动流动控制。结果表明:滑流使得进气道中的气 流偏离,难以形成稳定漩涡,容易发生流动分离;而合理设计的涡流发生器可以有效改善埋入式进气道内流场 特性,并使通过散热器的流量提高12%。     

U（sl（2,F）（＋））的生成元及生成关系

设sl（2，F）是三维单代数，sl（2,F）是相应于sl（2，F）的无扭仿型Kac-Moody代数的导代数。讨论了sl（2,F）的子代数sl（2,F）（＋）的普遍包络代数U（sl（2,F）（＋））的生成元及生成关系问题。     

Swsy-A型双压法湿度发生器的研制

介绍了适用于湿度校准实验室和现场使用的Swsy-A型双压法湿度发生器，阐述了其工作原理，并给出了技术指标、性能、试验结果和分析结论。     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

基于故障字典的旋转整流器故障检测方法

以交流电为主要电源的飞机普遍采用无刷交流发电机作为发电装置,但由于半导体器件抗干扰、抗过载能力差,旋转整流器成为故障发生率较高的部件,文中介绍了利用快速傅里叶变换（FFT）通过对励磁电流的分析来检测可能出现的故障,并利用故障字典快速地判断出故障原因。     

发烟机动力装置的试验研究

简要介绍了发烟机及其动力装置,研究并改进了ＷＱＪ－１型小型航空发动机,使之成为满足发烟要求的动力装置。确定了该发动机在新状态下的参数及结构,进行了发烟机的雾油发烟实验,得到了雾油发烟对发动机的影响及影响程度。实验结果表明：将ＷＱＪ－１型小发动机改为发烟机动力装置是可行的。对发烟机的型号研制和扩展小型航空发动机的使用范围有积极促进作用。