物体表面形状对热象仪测温的影响

本文报道利用红外热象仪 AGA780系统测量金属铝、铜和非金属石膏的平板及圆柱表面温度的准确度实验研究的结果。给出了表面形状不影响温度测量的“自由极角”范围,并且对影响测量准确性的其他因素也进行了讨论。     

Experimental and numerical study of deposition mechanisms for cold spray additive manufacturing process

Cold spray is an attractive and rapidly developing process for additive manufacturing with high efficiency and precision, repairing and coating, especially in aircraft and aerospace applications. Cold spray additive manufacturing deposits micro-particles with large plastic deformation below their melting point, eliminating heat effect zone which could deteriorate the quality of repairing zone. The particle deposition in cold spray is a complex process which involves high strain rate,high contact...     

AP/HTPB复合推进剂低压燃烧特性数值研究

为研究AP/HTPB复合推进剂低压燃烧特性,使用二维三明治模型进行了数值仿真研究。该模型使用简化的四步总包反应机理,考虑燃烧过程中的燃面退移,计算时大粒径AP取平均粒径,小粒径AP采用“均质黏合剂假设”,认为其与HTPB组成“均质黏合剂”。在0.02MPa-0.08MPa的压强下进行了仿真,并与高压（5MPa）下的燃烧仿真进行对比。结果表明,低压下固相AP对黏合剂的传热导致了交界面处燃面的下陷,下陷程度随压强减小而增大;随着燃烧的进行燃面各点燃速趋于一致,燃面形状不再改变。低压下气相反应表现为预混燃烧,初焰为主导反应。低压下燃速仿真与实验值基本一致,压强指数小于高压下的压强指数。     

工程陶瓷型面的超声磨削装置设计

以工程陶瓷三维型面的加工为例 ,介绍了超声磨削装置的结构、变幅杆及其系统设计 ,推导了用于数控加工的超声磨削装置变幅杆设计的数学模型。最后 ,在此基础上结合实际范例进行了验证 ,两者结果基本吻合 ,并在相关研究项目的设计中收到了良好的效果。     

Uncertainties and effects on geocenter motion estimates from global GPS observations

Global positioning system (GPS) observations can be used to estimate the geocenter motion, but are subjected to large uncertainties and effects due to uneven distribution of GPS stations and high-degree aliasing errors. In this paper, uncertainties and effects on geocenter motion estimates from global GPS observations are investigated and assessed with different truncated degrees and selected GPS network distributions based on different plate motion models, including NUVEL-1A, MORVEL56 and ITRF08. Results show that the selected GPS stations have no big effects on geocenter motion estimates based on different plate motion models, while large uncertainties are found at annual and semi-annual components when using different truncated degrees. Correlations of geocenter motion estimates from selected GPS networks with GRACE and SLR are better with truncated degree 3, and higher truncated degrees will degrade geocenter estimates. Smaller RMS also shows better results with the truncated degree 3 and the NUVEL1A has the worse results because more GPS sites are eliminated. For annual signal with truncated degree 3, four GPS strategies can reduce annual amplitudes by about 29.2% in X, 5.6% in Y, and 27.9% in Z with respect to truncated degree 1. Annual phases of all GPS solutions from MORVEL56 and ITRF08 are almost close to the GRACE solution with truncated degrees from 3 to 10, while the semi-annual signals are relatively weaker for all cases.     

The dynamical environments analysis of surface particles for different shaped asteroids

Asteroids are coming to be a popular topic in the areas of astrophysical studies and deep space exploration recently. However, surface dynamics of asteroids is still a difficult problem. This paper aims at the motion analysis of surface particles for different asteroids. The dynamical analysis method of particles’ movement is given for three parts: global motion trend, local motion trend and static analysis. A dimensionless parameter ζ is defined to distinguish the predominant term to determine the distribution of effective potential. Three kinds of common asteroids: spheroidal asteroid, spindle-shaped asteroid and dumbbell-shaped asteroid are all discussed for those three parts with different parameter ζ. The motion trend of particles on the surface of each kind of asteroid is given. The static analysis of surface particles for different asteroids is also illustrated. Based on them, some common rules for different shaped asteroids are revealed. This paper could not only provide a reference for asteroid exploration missions but also be meaningful for the research of morphologic evolution of asteroids.     

表面粗糙度对航空液压作动器密封性能的影响

航空液压作动器普遍应用在飞机机翼、舱门、起落架等部位,往复密封为其典型密封形式,密封失效会 严重影响飞机任务的执行和飞行安全。密封副表面粗糙度是重要的工程可控参数且对于密封性能的影响很 大,因此分析表面粗糙度对作动器密封性能的影响具有重要的理论和实际意义。建立适用于往复组合密封的 确定性混合润滑数值仿真模型,并与有限元分析方法结合计算膜厚值,分析密封圈表面粗糙的幅值和波长变化 以及运动速度和液压油黏度变化对密封圈润滑性能和密封性能的影响。结果表明:正弦粗糙表面的幅值和波 长增大,会引起油膜压力和油膜厚度波动的幅值增大,但会减小摩擦系数;正弦粗糙表面的幅值增大,有利于减 小密封间隙的最小膜厚和泄漏量,但是波长变化的影响作用不大;液压油黏度和活塞运动速度增大,有利于增 大密封间隙油膜厚度,但会增大泄漏量和摩擦系数。     

平面磨削石英陶瓷比磨削能正交试验研究

通过大量的正交试验,研究陶瓷材料在低速下的磨削性能,优化陶瓷磨削参数,对于丰富陶瓷磨削理论,指导实际生产实践具有重要的现实意义.     

Remotely sensed thermal information applied to urban climate analysis

Urban heat island (UHI) effects on the ten most populated cities of Hungary, including the Budapest agglomeration area, were analyzed using remotely sensed data. Day- and night-time surface temperature time series observed by sensor MODIS on satellite Terra were used to determine UHI intensities. UHI intensity was defined as the difference in spatially averaged surface temperatures between urban and surrounding rural pixels. Spatial structures of UHIs were determined and compared for different seasons and macrocirculation conditions.     

曲面磨削表面微观形貌建模方法研究

针对现有磨削表面微观形貌建模方法仅对某一类特定零件有效,提出了一种适用于空间曲面零件加工的磨削形貌建模方法。基于曲面磨削加工原理,建立砂轮坐标系与曲面零件坐标系之间的齐次变换矩阵,获得磨粒的三维运动轨迹方程。通过提出曲面区域逼近求解算法,建立曲面磨削表面微观形貌预测模型。并以展成法磨削齿轮和磨削轴承内套为例,得到两类实验与仿真结果之间的误差最大为11.338%和18.91%,验证了本文提出的预测模型的有效性与科学性。