加工表面形貌的在线检测及其应用

介绍了一种基于光针法的表面形貌测量装置,它能在线测量加工工件圆周方向的波纹度和轴向表面轮廓形貌,其垂直分辨率为0.02～0.10μm,横向分辨率为30～50μm。切削试验表明,该装置能够在线识别刀具上的积屑瘤、切削过程中的颤振和刀具磨损对加工表面形貌的影响。     

Lunar ground penetrating radar: Minimizing potential data artifacts caused by signal interaction with a rover body

Ground-penetrating radar (GPR) is the leading geophysical candidate technology for future lunar missions aimed at mapping shallow stratigraphy (<5 m). The instrument’s exploration depth and resolution capabilities in lunar materials, as well as its small size and lightweight components, make it a very attractive option from both a scientific and engineering perspective. However, the interaction between a GPR signal and the rover body is poorly understood and must be investigated prior to a space mission. In doing so, engineering and survey design strategies should be developed to enhance GPR performance in the context of the scientific question being asked. This paper explores the effects of a rover (simulated with a vertical metal plate) on GPR results for a range of heights above the surface and antenna configurations at two sites: (i) a standard GPR testing site with targets of known position, size, and material properties, and; (ii) a frozen lake for surface reflectivity experiments. Our results demonstrate that the GPR antenna configuration is a key variable dictating instrument design, with the XX polarization considered optimal for minimizing data artifact generation. These findings could thus be used to help guide design requirements for an eventual flight instrument.     

Characterizing bedrock lithologies using Small Crater Rims and Ejecta Probing (SCREP)

This paper describes the rationale, methodology, and importance of focusing on the rim and proximal ejecta of small (<5 km in diameter), immature impact craters to explore an underlying crustal lithology. Small Crater Rim and Ejecta Probing (SCREP) describes a methodology and application program that extracts bedrock spectral and compositional information from a remote sensing image. Extracted data can yield the pristine lithologies of a planetary crust that would otherwise be obscured by the products of space weathering processes. SCREP was developed with lunar data, specifically Clementine multispectral image mosaics, therefore the technique is discussed in this context. However, its application to other airless solar system bodies is apparent. Knowledge of the pristine bedrock compositions of a planetary crust provides insight into geological surface processes, which can be used to refine models of planetary interiors and their evolution.     

CFD simulation of helicopter rotor flow based on unsteady actuator disk model

Actuator Disks (AD) can provide characterizations of rotor wakes while reducing computational expense associated with modeling the fully resolved blades. This work presents an unsteady actuator disk method based on surface circulation distribution combined with empirical data, blade element theory and rotor momentum theory. The nonuniform circulation distribution accounts for 3D blade load effects, and in particular, tip loses. Numerical simulations were conducted for the isolated pressure sensitive paint model rotor blade in hover and forward flight using the HMB3 CFD solver of Glasgow University. Validation of CFD results in comparison with published numerical data was performed in hover, for a range of blade pitch angles using fully turbulent flow and the k-ω SST model. In forward flight, the vortex structures predicted using the unsteady actuator disk model showed configurations similar to the ones obtained using fully resolved rotor blades. Despite the reduced grid cells number, the CFD results for AD models captured well the main vortical structures around the rotor disk in comparison to the fully resolved cases.     

基于THz大气窗口的金星地表遥感研究

文章以金星快车VIRTIS载荷相关数据为出发点,验证金星大气模型相适应参数及其窗口。并通过模型参数中的THz频谱分布,阐述实现金星地表遥感探测科学目标的THz相适应理论基础,并提出多功能金星遥感构想。     

The contribution of local gravimetric geoid models to the calibration of satellite altimetry data and an outlook of the latest GOCE GGM performance in Gavdos

The use of geoid heights has been one of the available methodologies utilized for the independent calibration/validation of altimeters on-board satellites. This methodology has been employed for long in the Gavdos dedicated cal/val facility (Crete, Greece), where calibration results for the Jason satellites have been estimated, both for ascending and descending passes. The present work gives a detailed overview of the methodology followed in order to estimate a high-resolution and accuracy gravimetric geoid model for the wider Gavdos area, in support of the on-going calibration work. To estimate the geoid model, the well-known remove-compute-restore method is used while residual geoid heights are estimated through least-squares collocation so that associated errors are determined as well. It is found that the estimated formal geoid errors from LSC along passes 018 and 109 of Jason satellites, used for the bias estimation, range between ±0.8–1.6 cm. The so-derived geoid heights are employed in the determination of the Jason-2 altimeter bias for all available cycles (cycles 1-114, spanning the period from July 2008 to August 2011) together with the RioMed DOT model. From the results acquired the Jason-2 bias has been estimated to be +196.1 ± 3.2 mm for pass 109 and +161.9 ± 5.1 mm for pass 018. Within the same frame, the GOCE/GRACE-based geopotential model GOCO02s has been used to estimate the mean dynamic ocean topography and the steady-state circulation in the area around Gavdos. The so-derived DOT model was used to estimate the Jason-2 bias in an effort to evaluate the performance of satellite-only geoid models and investigate whether their spatial resolution and accuracy provides some improvement w.r.t. traditional local gravimetric geoids. From the results acquired with geoid heights from GOCO02s, the estimated Jason-2 bias deviates significantly from that of the local gravimetric model, which can be attributed to a possible mean offset and the low resolution of GOCE-based GGMs. On the other hand, when the newly estimated GOCE-based DOT was employed with geoid heights from the local gravimetric geoid model, the Jason-2 bias has been estimated to be +185.1 ± 3.2 mm for pass 109 and +130.2 ± 5.1 mm for pass 018.     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Surface integrity and fatigue behavior when turning γ-TiAl alloy with optimized PVD-coated carbide inserts

This paper presents a comprehensive investigation on the effects of tool and turning parameters on surface integrity and fatigue behavior in turning c-Ti Al alloy. The wear of inserts surface, cutting forces, and surface roughness were studied to optimize PVD-coated carbide inserts.Surface topography, residual stresses, microhardness, and microstructure were analyzed to characterize the surfaces layer under different turning parameters. Surface integrity and fatigue life tests of c-Ti Al alloy were conducted under turning and turning-polishing processes. The results show that compared to CNMG120412-MF4, CNMG120408-SM is more suitable because it obtained low cutting force, surface roughness, and tool wear. With increasing the cutting speed and depth, the depths of the compressive residual stress layer, hardening layer, and plastic deformation layer increased. For turning and turning-polishing specimens, the compressive residual stress was relaxed by less than 20%–30% after 10~7 cycles. The fatigue life of a turning-polishing specimen with R_a= 0.15 mm has increased 3 times from that of a turning specimen with R_a= 0.43 mm.     

曲面积分在三重积分中的应用

得到了把一类三重积分化为曲面积分的一个定理，并给出定理的一些应用。     

某型导弹前支脚协调零件加工工艺研究

叙述某型导弹的新型结构－－斜燕尾槽配合的具有高协调要求的镀镍、机加工的工艺方法。改进后的“镀前加工协调尺寸预先补偿法”，已成功应用于某型导弹的批产。在同类协调零件制造过程中，该种方法具有较大的借鉴作用。