Performance evaluation of creep feed grinding of γ-TiAl intermetallics with electroplated diamond wheels

This paper evaluates the performance of creep feed grinding γ-TiAl intermetallic (Ti-45Al-2Mn-2Nb) using electroplated diamond wheels. Firstly, a comparative analysis with the grinding results by using electroplated CBN wheels was conducted, mainly involving abrasive wheel wear behavior and maximum material removal rate below surface burn limit. It was found that the diamond wheel would produce much better grinding results including lower wheel wear rate and higher maximum material removal rate. Then the surface integrity obtained at different level of material removal rate was characterized with the utilization of the diamond wheel. The poor ductility of this γ-TiAl intermetallic material was found to have a marginal effect on the surface integrity, as no severe surface defects such as material pullout were generated during the stable wheel wear stage. For the involved operating parameters, a deformation layer was produced with ∼10 μm or more in thickness depending on the material removal rate used. Meanwhile, a work-hardened layer extending to more than 100 μm was produced with a maximum microhardness of above 520 HV_0.05 (bulk value 360 HV_0.05). The residual stress remained compressive, with a value of above −100 MPa and even up to −500 MPa for an elevated material removal rate. Shearing chip was the main chip type, indicating good wheel sharpness in the grinding process.     

Anhydrous based shear-thickening polishing of KDP crystal

Based on the special physical–chemical characteristics of optical crystal in the field of aeronautics, a new anhydrous based shear-thickening polishing (ASTP) method has been proposed to restrain deliquescence and to improve physical properties for KDP machining. The ultra-precision polishing of KDP crystal is completed by ASTP. A kind of anhydrous based thickening polishing slurry (ATPS) was proposed in our work, and high-performance rheological properties were determined to achieve the ASTP of KDP crystal. A material removal model of ASTP in KDP machining is established, followed by the verification experiment of the prediction model. The maximum error of the predictive model is only 9.8%, which proves the validity of the material removal model for KDP polishing. The polishing experiments were carried out on the polishing platform developed by ourselves. The results show that the new polishing method can polish 20 mm × 20 mm × 5 mm KDP crystal and obtain a super-smooth surface with a surface roughness of 1.37 nm and high shape accuracy. The surface accuracy of polished KDP crystal reaches up to 0.68λ (RMS). The experimental results show that the ASTP is a potential ultra-precision machining method for KDP crystal.     

基于特征的逆向工程数据分析

在CAD/CAM领域逆向工程是一门新兴的技术,对其进行初步研究,提出了在逆向工程中,零件特征数据的提取过程思路,以及实现初步建模的分析想法。     

过渡协调模式下机翼数学模型的建立

讨论了飞机制造模式由模拟量协调体系向数字量协调体系转化过程中出现的问题,重点研究了其中的关键技术,即飞机外形数字化模型的建立,主要包括理论图的分析与转化,外形数据的获取,翼型轮廓曲线的计算,外形曲面的重构以及误差检验等。上述建模过程遵循了原始设计意图,保证所建数模符合生产中使用的制造与检验依据,为定型飞机数字化建模提供了理论指导。     

航天器表面材料充电性能研究—关于RTV-Ⅱ和13-17涂层的评价

本文报道了RTV-Ⅱ黑漆和13-17白色涂层二种航天器温控材料的电导在综合空间环境条件下的实验结果。实验表明RTV-Ⅱ涂层材料的电导从1984年到1986年,几乎每年下降一个量级,因而充电状态明显改变。13-17涂层材料的电导对空间真空环境响应不明显,但对电子辐照和光辐照响应显著,尤其对光辐照存在强烈的记忆效应。预测该涂层在轨道上由光照区进入星蚀区也不会出现明显充电现象。     

航天柔性展开结构技术及其应用研究进展

综述了航天柔性展开结构的技术特点及其在航天器中的研究应用情况,围绕航天柔性展开结构应用涉及的薄膜褶皱、充气张力结构的屈曲失稳、展开动力学、精度测试、刚化材料等关键理论和技术基础,评述了航天柔性结构技术应用中的关键问题及未来研究重点,最后给出了航天柔性展开结构技术的未来发展趋势。     

A plastic strain energy method exploration between machined surface integrity evolution and torsion fatigue behaviour of low alloy steel

To explore the evolution mechanism of multistage machining processes and torsional fatigue behaviour based on strain energy for the first time and provide process optimization of axis parts of low alloy steel for service performance, four multistage machining processes were applied to the 45Cr Ni Mo VA steel, including the Rough Turning process(RT), RT+ the Finish Turning process(FRT), FRT+ the Grinding process(GFRT) and RT+ the Finish Turning process on dry cutting condition(FRT0). The result s...     

磨粒磨损对砂带磨削TC17表面完整性的影响研究

砂带磨粒磨损直接影响磨削表面质量进而影响构件综合服役性能.以表面完整性为评估指标,对砂带磨损前后钛合金的表面加工质量进行了试验研究,揭示了砂带磨粒磨损对磨削TC17表面粗糙度、残余应力和表面硬度的影响规律及机制.结果表明,磨粒磨损后由于高度均匀化、单位面积切削磨粒数增加、磨削深度减小,使得表面粗糙度减小、纹理均匀细腻,...     

电子束熔丝增材随行退火系统及均匀面热源扫描

在电子束熔丝沉积增材制造过程中,采用电子束对零件成形区域进行扫描并控制热输入,可以改善零件的温度分布,实现随行退火,达到减小应力和控制变形的目的.采用工控机、波形发生卡、扫描线圈及其驱动电路,以及动态聚焦线圈及其驱动电路搭建了电子束高速扫描系统,实现了电子束高速扫描及动态聚焦等功能.基于LabVIEW开发了随行退火扫描...     

无源无线声表面波压力传感器校准技术研究

声表面波压力传感器是一种新型传感器,它的一大优势是具有无源无线信号传递特性,可以突破传统传感器线缆连接的限制,近年来受到国内外研究机构普遍重视。本文探讨了SAW压力传感器的校准技术,对某种商业传感器进行校准,使用最小二乘法分析校准结果,并进行不确定度评估。校准结果显示该传感器在误差、线性、重复性等方面可满足一定精度要求,通过进一步发展,有望在航天领域得到实际应用。