飞机生产过程质量监控的系统理论和应用

本文运用系统工程和控制论的观点，以企业自身质量控制方法为基础，简要叙述外部力量参与全过程监控对保证和提高产品质量的作用，并示例论述了产品和过程质量控制的节点、控制要点和控制的基本方法。     

并行工程在商用飞机研发项目中的益处及其实施方法

使用较少经费和较短时间研发出质量优越的商用飞机是各飞机研发团队的共同目标。阐述了通过使用科学的方法和管理技术,例如并行工程,是商用飞机研发项目达成上述目标的途径之一,介绍了一种具备可操作性的实施并行工程的方法。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.     

AEDMS工程文件编号的生成算法

工程文件编号生成算法是国航工程文件管理系统（AEDMS）开发的难点。提出的．工程文件编号生成算法包括．工程文件流水号和改版号的指派算法与自动编排算法。前者解决了新旧系统．工程文件编号的兼容问题；后者是一种新的基于关系代数的自动编号算法，其利用元组序号，具有紧凑简单、可靠性好、可维护性好、执行效率高、适用面广的特点。实算结果和AEDMS运行实践表明，此工程文件编号生成算法是可行的。     

先进战斗机气动弹性设计综述

中国新一代战斗机的研发引领了飞机设计领域各项技术的创新和发展。针对研制总要求和任务特殊性，中国航空工业成都飞机设计研究所气动弹性专业建立了精益气动弹性设计与验证技术体系。基于多学科优化设计流程，开展了旨在提高飞机气动弹性品质的关键技术攻关、气弹优化设计和分析工作。完成了考虑含全动翼面结构非线性的全机动力学特性地面试验、亚跨超声速颤振模型风洞试验和气动弹性飞行试验验证。在较短的研发周期内，成功实现气动弹性设计目标，为新一代战斗机的成功研制提供了技术保障。描述了该飞机气动弹性设计历程、主要技术工作以及在此基础上取得的技术进步、能力提升以及具有研究所特色的气动弹性设计知识工程建设。     

一种非接触光外差轮廓仪

介绍了一种纳米级非接触超高精度光外差轮廓仪。该量仪是基于普通光路的外差干涉仪,两束具有微小频差的激光束照射到制件表面:其中一束光被会聚后作为测量光针扫瞄制件表面;另一束光则被用作参考光束。这两束光经反射后形成干涉,所得信号的光程差与制件表面高度变化成正比。量仪的横向分辩力小于2μm,垂直分辩力小于1nm。制件不需要进行大的调整。制件表面同时亦被作为测量参考面。经光电转换后,信号由微机处理,从而快速完成测量、计算、显示与打印各种参数与图形。     

攻角传感器的热失效分析与设计方案改进

根据压差归零式攻角传感器的工作原理、结构及工作条件，结合实际经验，分析了该传感器的主要失效因素，并重点分析了热失效问题；探讨了飞行中传感器探头加热器与环境之间的热交换情况。     

Pro／ENGINEER在模具设计中的使用技巧

分析了Pro／ENGINEER进行模具设计的使用技巧，阐明了并行工程技术与Pro／ENGINEER软件相结合的重要性。     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...