薄壁梁系的可靠性优化设计

以结构系统的可靠度作为薄壁梁系结构的优化控制参数。用改进的分枝眼界法判从主要失效模式。用PNET法计算结构系统的可靠度。导出了两种梁系结构可靠度的灵敏度分析表达式。提出最佳矢量型算法的选代公式,有效地求解了Ⅰ型截面梁系结构在系统可靠度约束下的最小重量设计问题;且在其中通过设计变量连接来满足薄壁梁的稳定性要求。算例的结果说明了方法的有效性。     

起落架结构参数对飞机机轮摆振频率特性的影响

研究了四个起落架结构参数：稳定距、机轮转动惯量、支柱侧倾刚度和减摆器传动系统扭转刚度对飞机机轮摆振频率特性的影响。对“轮胎型”摆振和“结构型”摆振进行了严格区分并分别予以研究,针对所计算的型号飞机,归纳总结出发生“轮胎型”摆振和“结构型”摆振的频率范围。所得结论为新机防摆设计和现役飞机防摆维护提供了理论依据。     

基于多特征融合分析的羽流烟雾区域识别

针对固体火箭发动机飞行试验中喷管排出的羽流烟雾光学信号的准确测量，应用数字图像处理技术提取羽流烟雾的静态和动态特征进行羽烟识别。为了滤除外场复杂环境对烟雾测量的干扰，设计了具有等间距的黑白条纹背景板。在黑条纹区域采用自适应的灰度阈值提取烟雾特征，在白条纹区域根据RGB和HSV颜色空间综合的方法提取烟雾特征，结合帧间差分法提取视频序列中烟雾区域的扩散边界。基于烟雾静态和动态特征综合的算法编写了烟雾处理软件，通过处理大量烟雾视频数据进行验证试验，证明羽流烟雾的识别能够有效提高光学信号测量的准确度。     

专用瞄准设备自动检定系统

介绍了专用瞄准设备自动检定系统的系统配置、工作原理及软件设计，并对系统的测量不确定度进行了分析和评定。     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。     

Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

航空发动机低压转子系统的“可容模态”设计及实验验证

建立了带弹性支承和阻尼器的航空发动机低压柔性转子动力学模型,进行了模态计算以及临界转速处的响应计算。在考虑临界转速约束与“临界跟随”现象约束的条件下,综合模态不平衡影响因子、弹支应变能占比以及套齿连接结构稳定性构造了可容度评价函数,建立了低压转子系统的“可容模态”优化设计方法。设计并搭建了低压转子实验系统,从模态测试实验、阻尼器减振实验以及长时间“共振”实验,验证了设计方法的可靠性。研究结果为计算的临界转速与实际测量的临界转速最大误差为3.86%,阻尼器在1阶与2阶临界转速处的减振比最大可达45.6%,实验转子系统在1阶与2阶临界转速处各完成了长达412.5 s和429.8 s的“共振”实验,共振过程中转子系统各通道振动单峰值稳定在100μm以内,且无次谐波产生。表明了所建立的航空发动机低压转子系统“可容模态”优化设计方法是可行的。     

Structurally coupled characteristics of rotor blade using new rigid-flexible dynamic model based on geometrically exact formulation

In rotor dynamics, blades are normally modelled as a slender beam, in which elastic deformations are coupled with each other. To identify these coupling effects, new rigid-flexible structural model for helicopter rotor system is proposed in this paper. Finite rotations of the whole blade(on flapwise, lagwise, and torsional) are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade ...