拦截器轨控发动机点火器分析与评估

对美国空基拦截器用轨控发动机组(MMA)的点火器性能特点、结构与材料等,进行了较全面的分析和评估,而且分析了该点火器在我国研制的可能性.开展此项研究,对我国战略防御武器系统的研究、设计和制造,将会产生较大的促进作用.     

俄制引进装备中数字板件国产化研制替代的探讨

针对维修中俄制引进地空导弹武器系统国产化数字板件替代装备联调过程中出现的延时累计误差“瓶颈”问题，分析研究了具体解决办法和措施，并通过了武器系统实弹打靶检验。     

基于导航定位原理的火箭涡轮泵轴承故障诊断

为准确判断火箭发动机涡轮泵轴承在试验台上试验时发生故障的部位，同时避免通过轴承特征频率诊断轴承故障的方法所带来的不确定性，基于GPS卫星导航定位原理，利用时幅曲线的相位信息，提出一种新的轴承故障诊断方法:振源坐标定位法，即通过四个已知坐标的振动传感器测得同一振动波的时幅曲线相位差判定振源位置。将试验台上轴承和四个振动信号传感器安放在坐标已知的直角坐标系中，利用时幅曲线拐点分析法准确捕获振动信号到达四个传感器的时刻，再利用这四个时刻和已知坐标计算出振源位置坐标，最后根据振源位置坐标判断其是否为轴承故障及具体故障部位。通过仿真计算证明该方法理论上可行。     

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

Real-time zenith tropospheric delays in support of numerical weather prediction applications

The Geodetic Observatory Pecný (GOP) routinely estimates near real-time zenith total delays (ZTD) from GPS permanent stations for assimilation in numerical weather prediction (NWP) models more than 12 years. Besides European regional, global and GPS and GLONASS solutions, we have recently developed real-time estimates aimed at supporting NWP nowcasting or severe weather event monitoring. While all previous solutions are based on data batch processing in a network mode, the real-time solution exploits real-time global orbits and clocks from the International GNSS Service (IGS) and Precise Point Positioning (PPP) processing strategy. New application G-Nut/Tefnut has been developed and real-time ZTDs have been continuously processed in the nine-month demonstration campaign (February–October, 2013) for selected 36 European and global stations. Resulting ZTDs can be characterized by mean standard deviations of 6–10 mm, but still remaining large biases up to 20 mm due to missing precise models in the software. These results fulfilled threshold requirements for the operational NWP nowcasting (i.e. 30 mm in ZTD). Since remaining ZTD biases can be effectively eliminated using the bias-reduction procedure prior to the assimilation, results are approaching the target requirements in terms of relative accuracy (i.e. 6 mm in ZTD). Real-time strategy and software are under the development and we foresee further improvements in reducing biases and in optimizing the accuracy within required timeliness. The real-time products from the International GNSS Service were found accurate and stable for supporting PPP-based tropospheric estimates for the NWP nowcasting.     

放宽静稳定度飞机时间延迟稳定边界

针对飞机初步设计阶段其放宽静稳定度（RSS）与电传飞控系统时间延迟边界之间的定量关系求解问题，以战斗机纵向短周期方程为基础，分析了飞控系统中的时间延迟因素，描述了放宽静稳定度与方程参数间的关系。并以等效输入延迟的形式构建了含飞控系统时间延迟的闭环系统特征方程，通过根轨迹趋势理论和数值计算方法确定了放宽静稳定度与飞控系统时间延迟边界的定量数值关系，同时探讨了舵效与动导的参数不确定性对所求时间延迟边界的影响。本文方法对飞机初步设计阶段飞控系统时间延迟指标和可放宽静稳定度边界的确定具有一定的工程实践意义。     

Mechanism of stall and surge in a centrifugal compressor with a variable vaned diffuser

To expand the stable operating range of compressors, understanding the mechanism of flow instability at low flow rates is necessary. In this paper, the mechanism of stall and surge in a centrifugal compressor with a variable vaned diffuser is experimentally investigated, where the diffuser blade setting angle can be adjusted. Many dynamic pressure transducers are mounted on the casing surface of the compressor. From the design condition to surge, dynamic pressure data is recorded throughout the gradual process. According to the signal developing status, the typical modes of compressor instability are defined in detail, such as stall, mild surge, and deep surge. A relatively high-frequency stall wave originates in the impeller and propagates to the diffuser, and finally stimulates a deep surge in the compressor. The compressor behavior during surge differs at different diffuser vane angles. When the diffuser vane angle is adjusted, both the unstable form and the core factor affecting the overall machine stability change. A specific indicator is proposed to measure the instability of each component in a compressor, which can be used to determine the best region for stability extension technologies, such as a holed casing treatment, in different compressor applications.     

OPNET仿真软件在校园网中的应用

OPNET是目前一种很好的网络仿真工具。详细分析了较为通用的校园网,根据给定的校园网网络拓扑结构建立仿真中的网络模型,运用OPNET仿真软件对校园网内部简单的电子邮件传递服务和比较繁重的HTTP浏览进行了详细的研究。在网络模型的基础上,进行指定仿真数据的搜集工作,最后运行仿真,并根据产生的报告给出分析和总结。     

用准稳态方法建立碳氢燃料点火燃烧的简化化学反应动力学模型

基于“准稳态”方法建立了一套碳氢燃料点火燃烧的化学反应动力学模型简化方法和相应的软件SPARCK,并从甲烷点火燃烧的GRI2.11详细基元反应动力学模型出发简化得出了包含16个组分12步总包反应形式的简化化学反应动力学模型,从庚烷点火燃烧的详细基元反应动力学模型出发简化得出了包含25个组分21步总包反应形式的简化化学反应动力学模型。通过其计算结果与CARM软件导出简化模型的计算结果和典型激波管试验结果的对比可以看出,本文简化得到的简化反应动力学模型能较为有效地再现详细基元反应模型的反应机理,简化模型的计算精度与CARM软件导出简化模型的计算精度相当。与详细基元反应动力学模型相比,简化模型有效地减少了反应组分,在工程计算中有比较好的应用前景。     

甲烷点火燃烧的简化化学反应动力学模型

1引言超燃发动机的燃烧室是整个超燃发动机研究的关键所在,有效缩短碳氢燃料的点火延迟时间,提高点火性能,对于缩短发动机长度、减轻发动机重量、提高其性能具有极其重要的意义[1]。碳氢化合物的燃烧是一个很复杂的化学过程,以甲烷为例[2],描述其详细燃烧反应机理的GR I-Mech化