制导飞行含人工跟踪的飞行力学分析

以工程应用为背景，研究了含人工跟踪的制导飞行动力学问题，首先，给出了经过技术培训的行为物理模型。接着详细分析了人工跟踪回路的稳定性和跟随性，同时提供了一种改善人工回路特性的方法。最后，对含人跟踪回路的飞行器闭环回路的人工跟踪误差特性进行分分析和仿真计算。仿真结果证明该研究方案是可行的，研究结果已被国内有关部门在工程上采用。     

壳体轴压失稳载荷的非破坏预示

本文提出了侧向柔度法。该方法把壳体的侧向柔度率作为控制参数,研究该参数随轴压的变化特性,结合低载荷下的实测数据,运用最小二乘法原理进行拟合,可预示失稳载荷。计算实例表明,这种方法是可行的。     

涡轴发动机稳定性实验研究

为了评定涡轴发动机的稳定性,采用了可移动插板式压力畸变发生器评定方法对其稳定性进行评定,通过分析喘振时的压力信号,得到了临界状态下的各种参数和临界畸变指数,在此基础上间接地比较了四台发动机的稳定性的好坏,并且发现该发动机由于离心压气机首先失稳从而引起发动机喘振,且低转速下对喘振的容忍能力要高于高转速状态,这些结论可以作为该型涡轴发动机改进和设计使用的参考依据.     

舰载机理想着舰点垂直运动的预估与补偿

理想着舰点的垂直运动是影响着舰精度和安全的一个主要因素,因此必须加强舰载机对理想着舰点垂直运动的同步跟踪能力.为此,提出对理想着舰点垂直运动的位置和速度信号进行预估和补偿的方法,将垂直运动的位置和速度信号经过预估和补偿后分别引入到纵向自动着舰引导系统和飞控系统的垂向速度通道中,使得舰载机可以准确跟踪理想着舰点的垂直运动,以减小甲板运动对着舰的影响.针对不同海况条件,对设计的补偿器和预估器进行仿真验证,并与其他方法进行比较.结果表明本文提出的理想着舰点垂直运动预估与补偿方法可有效地补偿由甲板运动引起的着舰误差,显著提高了着舰的安全性和精确性.     

CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.     

Extensions in adaptive model tracking with mitigated passivity conditions

Feasibility of nonlinear and adaptive control methodologies in multivariable linear timeinvariant systems with state space realization {A, B, C} has apparently been limited by the standard strict passivity (or positive realness) conditions that imply that the product CB must be positive definite symmetric. More recently the symmetry condition has been mitigated, requiring instead that the not necessarily symmetric matrix CB be diagonalizable and with positive real eigenvalues. However, although the mitigated conditions are useful in proving pure stabilizability with Adaptive Controllers, the Model Tracking question has remained open and counterexamples seem to demonstrate total divergence of standard model reference adaptive controllers when the regular passivity conditions are not fully satisfied. Therefore, this paper further extends the previous results, showing that the new passivity conditions do guarantee stability with adaptive model tracking. Examples show how the new conditions solve the case of flexible structures with unknown parameters when perfect collocation is not possible. Also, the so-called counterexamples become simple, well-behaved, examples.     

Bifurcation analysis of polynomial models for longitudinal motion at high angle of attack

To investigate the longitudinal motion stability of aircraft maneuvers conveniently, a new stability analysis approach is presented in this paper. Based on describing longitudinal aerodynamics at high angle-of-attack (a < 50 ) motion by polynomials, a union structure of two-order differential equation is suggested. By means of nonlinear theory and method, analytical and global bifurcation analyses of the polynomial differential systems are provided for the study of the nonlinear phenomena of high angle-of-attack flight. Applying the theories of bifurcations, many kinds of bifurcations, such as equilibrium, Hopf, homoclinic (heteroclinic) orbit and double limit cycle bifurcations are discussed and the existence conditions for these bifurcations as well as formulas for calculating bifurcation curves are derived. The bifurcation curves divide the parameter plane into several regions; moreover, the complete bifurcation diagrams and phase portraits in different regions are obtained. Finally, our conclusions are applied to analyzing the stability and bifurcations of a practical example of a high angle-of-attack flight as well as the effects of elevator deflection on the asymptotic stability regions of equilibrium. The model and analytical methods presented in this paper can be used to study the nonlinear flight dynamic of longitudinal stall at high angle of attack.     

Dihedral influence on lateral–directional dynamic stability on large aspect ratio tailless flying wing aircraft

The influence of dihedral layout on lateral–directional dynamic stability of the tailless flying wing aircraft is discussed in this paper. A tailless flying wing aircraft with a large aspect ratio is selected as the object of study, and the dihedral angle along the spanwise sections is divided into three segments. The influence of dihedral layouts is studied. Based on the stability derivatives calculated by the vortex lattice method code, the linearized small-disturbance equations of the lateral modes are used to determine the mode dynamic characteristics. By comparing 7056 configurations with different dihedral angle layouts, two groups of stability optimized dihedral layout concepts are created. Flight quality close to Level 2 requirements is achieved in these optimized concepts without any electric stability augmentation system.     

跨声速轴流压气机失速边界预测方法

研究了跨声速、单级设计压比为1.82的Stage 35轴流压气机与单级设计压比为2.05的Stage37轴流压气机在不同转速下的特性.在HARIKA原型程序基础上,改进了其叶排效率、落后角、理论能头计算模型,采用了两种轴流压气机失速边界的预测方法,第1种为HARIKA原型程序的分离流量预测方法,第2种为Koch所提出的失速静压升系数预测方法,所得特性计算结果与实验点吻合较好,Stage 35设计点效率的误差由原型的3.9%降低到改进后的1.5%,Stage 37设计点效率的误差由3.1%降低到1.9%.两种预测方法对失速边界流量的预测误差最小分别可达1.3%与1.6%,表明两种失速边界预测方法都是可行的.     

某型燃气轮机进气系统内流场的数值分析

为了揭示燃机进气系统内的流动特性,并为进气系统的性能预测、优化设计提供理论依据,以某型燃气轮机的进气系统为研究对象,基于混合网格的SIMPLE算法和标准的k-ε湍流模型,运用FLUENT软件对燃气轮机进气系统内的流场进行数值模拟,并从压力分布、气流角分布2个方面进行分析。结果表明:对气动性能产生重要影响的损失区域主要集中在进气外环上方和支板附近,蜗壳内锥的绕流分离也是损失源之一。应进行尽可能消除进气外环上方的气流分离,同时将绕流分离控制在一定范围内的优化设计和改进。