Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

Obscured Activity: AGN, Quasars, Starbursts and ULIGs Observed by the Infrared Space Observatory

Some of the most ‘active’ galaxies in the Universe are obscured by large quantities of dust and emit a substantial fraction of their bolometric luminosity in the infrared. Observations of these infrared luminous galaxies with the Infrared Space Observatory (ISO) have provided a relatively unabsorbed view to the sources fuelling this active emission. The improved sensitivity, spatial resolution and spectroscopic capability of ISO over its predecessor Infrared Astronomical Satellite (IRAS) of enabled significant advances in the understanding of the infrared properties of active galaxies. ISO surveyed a wide range of active galaxies which, in the context of this review, includes those powered by intense bursts of star formation as well as those containing a dominant active galactic nucleus (AGN). Mid-infrared imaging resolved for the first time the dust enshrouded nuclei in many nearby galaxies, while a new era in infrared spectroscopy was opened by probing a wealth of atomic, ionic and molecular lines as well as broad band features in the mid- and far-infrared. This was particularly useful, since it resulted in the understanding of the power production, excitation and fuelling mechanisms in the nuclei of active galaxies including the intriguing but so far elusive ultraluminous infrared galaxies. Detailed studies of various classes of AGN and quasars greatly improved our understanding of the unification scenario. Far-infrared imaging and photometry revealed the presence of a new very cold dust component in galaxies and furthered our knowledge of the far-infrared properties of faint starbursts, ULIGs and quasars. We summarise almost nine years of key results based on ISO data spanning the full range of luminosity and type of active galaxies.     

弹道靶红外辐射测量

为深入认识再入物理现象 ,在弹道靶上做了模型头部和近尾流红外辐射测量。发射器为 1 4.5mm口径的二级轻气炮 ,模型为1 0mm的球 ,材料为聚碳酸酯和铝 ,模型发射速度 4～6km/s,使用红外InSb探测器测量波长 3～ 5 .4μm的红外辐射 ,靶室压力 5 .32kPa。实验中使用光电法测量模型速度 ,两站阴影照相进行模型姿态监测和速度核实。实验结果表明 :球模型的红外辐射强度强烈依赖于模型材料和模型飞行速度。对不同材料模型头部和尾流部辐射强度的定性比较说明由于低温材料烧蚀产物的存在 ,极大地增强了头部和近尾流区的辐射强度 ,而且延长了尾流辐射长度     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

红外探测阵列对固体导弹尾焰跟踪定位的研究

通过分析研究建立了前视红外探测阵列ＦＬＩＲ（Ｆｏｒｗａｒｄ Ｌｏｏｋｉｎｇ Ｉｎｆｒａ－Ｒｅｄ）对导弹进行精确跟踪、定位的数学模型，其中包括导弹的运动模型、大气干扰模型和探测阵列的观测模型。利用探测阵列ＦＬＩＲ的原始观测数据，扩展卡尔曼滤波器（ＥＫＦ）精确跟踪导弹目标。由于导弹与探测器的距离较远，故为视为点目标。导弹在探测阵列上投影的位置由两部分组成：导弹真实运动位置和由于大气干扰造成的偏移。滤波     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

高超声速小钝锥尾流化学非平衡辐射研究

本文主要目的是研究化学非平衡对高超声速小钝锥尾流辐射的影响。计算结果表明：激发发射辐射比化学发光辐射重要，红外辐射比可光辐射重要。结果还表明：由化学非平衡瞬时辐射模型计算求得的ＮＯ５．３μ的辐射能比由局部平衡辐射模型求得的辐射能大３０￣７０％。由此可知，小钝锥尾流的化学非平衡辐射模型对辐射的影响是不能忽略的。     

对红外制导系统的噪声分析与动态模拟

本文基于近红外制导系统噪声分析的框架模型，在分析探讨主要噪声源的基础上，给出了基本噪声立意，建立了探测器等组成部件基本噪声的功率谱分析式，设计出一种以红外探测器为抑制主体的减噪系统。通过目标、误差响应率的测定与跟踪试验获得较好的效果。     

建立腔体热释电探测器相对光谱响应度标尺的研究

由于腔体热释电探测器在宽光谱范围内具有相对平坦的光谱响应度,因此经常被用作标定探测器相对光谱响应度的工作基准。但是在标定过程中通常认为腔体热释电探测器是无光谱选择性的,即R(λ)为常数。这样就会使测量结果不够准确,因此建立腔体热释电探测器相对光谱响应度的标尺是非常重要的。本文主要介绍了建立腔体热释电探测器相对光谱响应度标尺的原理和方法,并通过实验利用该方法建立了腔体热释电探测器相对光谱响应度的标尺,从而使该腔体热释电探测器成为红外光谱响应度测量装置的工作基准。     

New multifrequency measurements of the spectrum of the cosmic background radiation

New measurements of the Cosmic Background Radiation temperature at 12 cm, 6.3 cm, 3 cm, 0.9 cm and 0.3 cm have made in July 1982 from the White Mountain High Altitude Research Station. The results are presented and the existence of spectral distortions discussed.