基于NASTRAN节点载荷批处理的编码技术

飞机载荷主要涉及气动载荷、地面载荷、惯性载荷等,载荷的工况也是琐碎繁多,如何将不同工况、不同部件、不同类型的载荷批量化生成利用NASTRAN进行有限元分析的接口文件,是飞机强度分析输入的关键技术。通过特定的载荷编码技术并结合NASTRAN载荷定义的卡片格式,将某型飞机90种严重工况下的气动节点载荷、地面节点载荷、惯性节点载荷按照一定编码批处理地导入NASTRAN的bdf文件中,分析和计算表明该方法具有良好的载荷识别性能和准确性以及较高的载荷输入效率。     

固液捆绑火箭星箭耦合分析技术研究

新一代中型固液捆绑火箭频率低、模态密、全箭动力学特性复杂,助推与芯级之间的力的传递特性在纵横扭方向存在耦合,传统纵横向分离的星箭耦合分析方法无法准确预示星箭界面力学环境。本文针对固液捆绑火箭的特点,建立了星箭耦合系统纵横扭一体化有限元模型;根据火箭飞行特定设计工况建立具有时变飞行特征的外力函数,对火箭特征工况进行了瞬态响应分析;通过子结构内力恢复对固液捆绑火箭的星箭界面力学环境进行了准确预示,具有较高的工程应用价值。     

Evaluation of thermal effects on temperature-sensitive operating force of flow servo valve for fuel metering unit

The temperature-induced variation in operating force of flow control valves may result in performance degradation or even jam faults of fuel metering unit (FMU), which significantly affects the safety of aircrafts. In this work, an analytical modeling approach of temperature-sensitive operating-force of servo valve is proposed to investigate the temperature characteristics in varying temperature conditions. Considering the temperature effects, a new extended model of flow force is built and an analytical model of valve friction is also derived theoretically based on the dynamic clearance induced by thermal effects. The extremum condition of friction is obtained to analyze the characteristic-temperature points where jam faults occur easily. The numerical results show that flow force increases firstly and then decreases as temperature increases under a constant valve opening. The maximum friction of flow servo valve can be uniquely determined when the structural parameters and ambient temperature are given. The worst situation just happens at the characteristic-temperature points, which are linearly related to the axial temperature gradients of valve spool. Such evaluations may give an explanation for the temperature-induced jam faults of vulnerable valves and provide a reference for designers to determine a suitable working-temperature range of valves in practice.     

论领导干部的表达力

领导干部的表达力,不仅是个人的人力资本,更是组织的宝贵财富。其现实表现具有策略性。通过个人的学习和组织的文化引领,可以实现角色转换、认同、超越,进而改善和提高表达力。     

常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点，尝试将永磁体引入至制动器驱动结构中，设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件，采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明，电磁与永磁两磁场耦合性较好，电磁吸力随电流增加及气隙的减小增幅较大，且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大，对电磁制动器轻量化研究具有指导意义。     

Thermospheric winds over Abuja during solar minimum period

Monthly variations of averaged nighttime thermospheric winds have been investigated over Abuja, Nigeria (Geographic: 9.06°N, 7.5°E; Geomagnetic: 1.60°S). The reports are based on Fabry-Perot interferometer measurements of Doppler shifts and Doppler broadening of the 630.0 nm spectral emission. The results were obtained during a period of weak solar activity with the solar flux (F10.7) typically below 70 solar flux units. Inspection of the average monthly thermospheric winds from October 2017 to December 2017 found December meridional winds to be more equatorward than the October and November winds. Zonal winds are eastward with pre-midnight maximum speeds going above 100 m/s. Compared to Jicamarca zonal winds in the Peruvian sector for the same month of October, the magnitude of maximum Abuja zonal wind speed is weaker. We compare the observed diurnal variation with the recently updated Horizontal wind model (HWM 14). Most of the observational features of thermospheric wind diurnal variation are captured in the model variation. The HWM14 generally showed good agreement with the Abuja October and November zonal wind observations but overestimates the December meridional winds. Expected longer period analysis of the results from Abuja will stimulate a better understanding of wind climatology over the West African sector.     

侧向随动力作用下大展弦比柔性机翼的稳定性

 随动力能够诱发弹性结构发生颤振失稳。以侧向随动力和集中质量分别模拟发动机推力和外挂质量,考虑机翼垂直弯曲-扭转刚度比、集中质量大小、侧向随动力和集中质量的位置以及机翼后掠角和上反角的影响,研究了受侧向随动力作用的大展弦比柔性机翼的气动弹性稳定性。数值模拟所采用的大展弦比柔性机翼非线性气动弹性模型耦合了几何精确完全本征运动梁模型和ONERA动失速非定常气动力模型,该模型考虑了几何非线性、动失速和材料各向异性。模拟结果表明,侧向随动力对机翼颤振可以具有稳定作用,其具体表现依赖于若干变参数的影响,如：减小机翼垂直弯曲-扭转刚度比;发动机吊舱靠近翼根布置;使发动机推力作用点在法向上与机翼弹性轴靠近;单纯的集中质量避免布置在柔性机翼中部,且布置在机翼弹性轴之前或下方,这些设计或布置均有利于提高带发动机吊舱/有效载荷外挂的柔性机翼的气动弹性稳定性。     

介质阻挡放电等离子体气动激励的动量特性

从诱导气流速度和体积力两个方面开展了介质阻挡放电等离子体气动激励的动量特性研究,对不同激励参数下的诱导气流速度进行了测量与结果分析;通过对体积力的实验测量与理论计算,对比研究了体积力的变化规律与主要影响因素.结果表明:等离子体气动激励可以增大气流速度,但随着气流速度的增大,等离子体气动激励的加速效果减弱;激励电压或激励频率增大,体积力均表现为线性增加,但激励电压增大时可以更好的增大体积力;与增大电极内间距相比,增大下层电极宽度可以产生更大的体积力.      

Study on UAV Path Planning Approach Based on Fuzzy Virtual Force

This article proposes a novel fuzzy virtual force (FVF) method for unmanned aerial vehicle (UAV) path planning in complicated environment. An integrated mathematical model of UAV path planning based on virtual force (VF) is constructed and the corresponding optimal solving method under the given indicators is presented. Specifically, a fixed step method is developed to reduce computational cost and the reachable condition of path planning is proved. The Bayesian belief network and fuzzy logic reasoning theories are applied to setting the path planning parameters adaptively, which can reflect the battlefield situation dynamically and precisely. A new way of combining threats is proposed to solve the local minima problem completely. Simulation results prove the feasibility and usefulness of using FVF for UAV path planning. Performance comparisons between the FVF method and the A* search algorithm demonstrate that the proposed approach is fast enough to meet the real-time requirements of the online path planning problems.     

正弦力校准中质量块加速度分布影响的理论修正研究

通过理论分析得到质量块加速度分布影响的理论修正公式,并利用有限元法验证了理论公式,同时对实际应用中理论公式的修正偏差作出估计,为动态力校准的不确定度分析提供了可靠依据。