非恒定增压式微尺度拉瓦尔喷管流动特性

针对微尺度喷流在航天器运动状态切换时出现的非恒定增压变化,采用直接模拟蒙特卡洛(DSMC)方法对阶跃式增压和线性式增压两种模式下的微尺度拉瓦尔喷管流场进行了模拟,并对其变化过程中的流动特性进行了对比分析。结果显示：阶跃式增压会导致流动特性出现较大幅值的峰谷式波动,而线性式增压下的流动特性则呈现出线性变化的特点;黏性力对微尺度喷流的非恒定增压变化产生了重要的黏滞作用,在喉部扩张段至出口的流场中尤为明显;在设定的条件下,阶跃式增压过程中喷流产生的总冲量较线性式增压高59.5%,质量流量高74.7%,单位工质提供的冲量低约8.6%,波动性也高于线性式模型,阶跃式增压适用于系统需要较大推力改变运动状态且推进剂充足的情况,而线性式增压在系统精确微调或需要推进剂产生更高效能时具有明显的优势。     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

The Crab pulsar seen with AquEYE at Asiago Cima Ekar observatory

We are developing fast photon-counter instruments to study the rapid variability of astrophysical sources by time tagging photon arrival times with unprecedented accuracy, making use of a Rubidium clock and GPS receiver. The first realization of such optical photon-counters, dubbed AquEYE (the Asiago Quantum Eye), was mounted in 2008 at the 182 cm Copernicus Observatory in Asiago. AquEYE observed the Crab pulsar several times and collected data of extraordinary quality that allowed us to perform accurate optical timing of the Crab pulsar and to study the pulse shape stability on a timescale from days to years with an excellent definition. Our results reinforce the evidence for decadal stability of the inclination angle between the spin and magnetic axis of the Crab pulsar. Future realizations of our instrument will make use of the Galileo Global Navigation Satellite System (GNSS) time signal.     

类IXV飞行器初期再入制导与姿态控制方法研究

摘要： 针对类IXV飞行器无翼式升力体构型及采用RCS/尾襟翼组合控制特点,研究其初期再入段的高精度制导与姿态控制方法.设计带过程约束的数值预测 校正制导律以提高制导系统的鲁棒性及精确性;根据其执行机构配置特点,设计基于RCS的航向控制律及基于RCS/气动舵的纵、横向复合控制律,并采用鲁棒伺服LQR技术进行控制参数快速设计.通过蒙特卡洛打靶仿真来验证算法的精度及鲁棒性.     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值,存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave,CW）测试,对无线信号穿墙损耗的影响因素和变化规律进行分析,提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法,对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则,在实际场景下具有良好的预测准确度。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状,阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景;对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结,并在此基础上对发动机主要组件的技术方案及其特点开展分析;对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析;对50t级氢氧火箭发动机的研制情况、技术特点进行了总结,并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

CAN总线在电液伺服阀性能测试系统中的应用

伺服阀性能测试系统中,测控电路和计算机间的模拟信号传输易受外界干扰,而把信号以数码形式通过CAN总线传输的方法,可以彻底消除外界干扰问题,还能提高系统的性能和可靠性。介绍了CAN总线硬件电路、程序设计及CANopen通讯协议的实现,讨论了CAN总线在测试系统上的实际应用。     

一类隔离驱动电路的“剩余驱动”问题

讨论直流变换器中将脉宽调制器（PWM）输出与受控MOS管栅极连接的一类开关驱动电路.专注于分析它在PWM电路关闭后对栅极产生的驱动信号,被命名为＂剩余驱动＂.描述这类剩余驱动的电气特性,说明它对变换器造成的危险,提出改进这类驱动电路以消除这些危险的4种方法.     

基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响,因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法,并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明,两种方法的消噪效果相当,均能有效滤除PPP时间比对数据中的随机噪声,明显改善时间比对的稳定度。