频域盲源分离的非圆信号推广

作为盲源分离（BSS）问题的最有效解决方法之一,独立分量分析（ICA）算法可以分为时域和频域算法两类.将时域盲源分离的快速算法推广到频域,通过在频域中应用非圆信号的伪协方差矩阵,推导出一个新的固定点算法来解决线性瞬时混合的非圆信号盲源分离（BNSS）问题.仿真实验验证了该算法的有效性.     

地源热泵技术在建筑节能中的应用

本文探讨如何通过地源热泵技术实现建筑节能。研究通过地源热泵来实现一机多用,使其既能用于冬季供暖,又可以用于夏季制冷。同时也讨论了如何与太阳能相配合,来实现地热平衡。文中还给出了通过插值法和曲线拟合法对测量数据进行处理获得变温带和增温带的温度-深度曲线的方法。     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

利用流线法决定绕扁长椭球流动分离的位置

本文按照流线法把所测量的扁长椭球的压力分布用于决定涡层型三维流动分离,按边界层边缘处流线会聚的位置近似地决定分离线的位置。作为算例,计算了扁长椭球体在α=30°状态下的绕流,并在水洞中作了流场显示,数值结果和实验结果的对比表明,二者十分一致。分析表明,涡层型分离不仅与壁面极限流线的收敛有关,而且还与边界层边缘处流线会聚有关,前者的出现并不是引起涡层型流动分离的充要条件。     

基于盲源分离的雷达信号欺骗干扰抑制

针对脉冲压缩信号的频谱弥散(SMSP)干扰,通过分析其时频特性,提出了一种基于盲分离的抑制算法。首先,推导了基于独立分量分析的代价函数,由于代价函数中信号概率密度函数不能精确估计,利用信号高阶互累积量的性质,重新构造了一种新的代价函数;其次,利用基于自然梯度的方法对新代价函数进行优化,从而得到基于峭度的盲分离算法;最后,通过仿真证明,对比Fast ICA算法,文中算法具有更快的收敛速度和更好的分离性能,在保证分离精度的前提下,可成功将目标回波信号分离,达到SMSP干扰抑制的目的。     

用大面积源检定核应急机载/车载伽玛能谱仪

人工核素大面积源标准是核工业航测遥感中心等单位经过十余年研究建立的新型计量保障标准,使用该标准,可对监测核应急伽玛辐射环境的机载/车载伽玛能谱仪进行检定.使用大面积源标准检定,可以有效地弥补因机载/车载伽玛能谱仪系统的角响应影响因素复杂而难于模拟计算的缺陷,为监测核应急伽玛辐射环境的机载/车载伽玛能谱仪提供了量值传递的保障.本文介绍了大面积源检定的原理和技术方法.     

航天飞机系统两体分离问题的探讨

本文简要地叙述了美国研究轨道器与外挂贮油箱,轨道器与载机分离问题的概况。对垂直起飞两级入轨的并联两机的分离问题,提出了研究模型并作了具体分析,着重提出了实现两机安全分离需要解决的技术难点。 二级航天飞机的两机分离问题,是未来航天高技术领域的关键技术之一,本文阐述了解决两体并联分离问题我国现有的技术水平,并提出了解决该问题的技术方案。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。