Universal scaling laws for fully-developed magnetic field turbulence near and far upstream of the Earth’s bow shock

We analyze the multifractal scaling of the modulus of the interplanetary magnetic field near and far upstream of the Earth’s bow shock, measured by Cluster and ACE, respectively, from 1 to 3 February 2002. The maximum order of the structure function is carefully estimated for each time series using two different techniques, to ensure the validity of our high-order statistics. The first technique consists of plotting the integrand of the pth order structure function, and the second technique is a quantitative method which relies on the power-law scaling of the extreme events. We compare the scaling exponents computed from the structure functions of magnetic field differences with the predictions obtained by the She–Lévêque model of intermittency in anisotropic magnetohydrodynamic turbulence. Our results show a good agreement between the model and the observations near and far upstream of the Earth’s bow shock, rendering support for the modelling of universal scaling laws based on the Kolmogorov phenomenology in the presence of sheet-like dissipative structures.     

典型卫星轨道的位移损伤剂量计算与分析

位移损伤剂量是评估电子元器件在轨发生位移损伤导致性能退化的重要参数。文章首先给出了位移损伤剂量的等效原理和计算方法,即用位移损伤等效注量来表征卫星轨道带电粒子导致的位移损伤剂量;之后分别采用3种不同的太阳质子注量模型,计算了典型大椭圆轨道的位移损伤等效注量,并结合计算结果对不同模型的特点和适用性进行了分析;其后针对4种典型卫星轨道,计算了不同飞行寿命期内的位移损伤等效注量,发现不同轨道的位移损伤剂量有较大差异,并结合空间带电粒子辐射环境分布特点及卫星轨道参数等分析了差异的产生原因;最后,分析不同的太阳质子注量预估方法对位移损伤剂量计算结果的影响,总结了不同轨道、不同飞行寿命情况下卫星经受的带电粒子辐射环境的严酷程度。研究结果可为卫星内部元器件位移损伤效应防护工作提供参考。     

Periodic Variations of Drag Coefficient for the ANDE Spherical Satellites During its Lifetime

A drag coefficient (C_D) inversion method is introduced to study the variations of the drag coefficient for orbital satellites with spherical geometry. Drag coefficients of the four micro satellites in the Atmospheric Neutral Density Experiment (ANDE) are compiled out with this new method. The Lomb-Scargle Periodgram (LSP) analysis of the four ANDE satellites' C_D series has shown that there are obvious 5, 7, 9, and 27 days' period in those data. Interesting results are found through comparing the LSP analysis with series of the daily solar radio flux at 10.7 cm (F_10.7 index), the Ap index, and the daily averaged solar wind speed at 1AU. All series in the same time interval have an obvious period of about 27 days, which has already been explained as the association with the 27 days' solar rotation. The oscillating periods less than 27 days are found in series of C_D, Ap and solar wind speed at 1AU, e.g., the 5, 7, 9 days period. However, these short periods disappeared in the time series of F_10.7 index. The same periodicities of 5, 7, 9 days in Ap and solar wind are presented at the same time interval during the declining phase of solar cycle 23. While in the ascending phase of solar cycle 24, these short oscillations are not so obvious as that in the declining phase of solar cycle 23. These results provide definite evidence that the C_D variations with period of 5, 7 and 9 days are produced by a combination of space weather effects caused by the solar wind and geomagnetic activity.      

乙烯和汽油多循环脉冲爆震发动机起爆特性比较

为了研究脉冲爆震发动机(PDE)结构对其工作性能的影响,在内径为40mm、长为1050mm的气动阀式脉冲爆震发动机样机上,进行了气态乙烯/空气和液态汽油/空气的多循环起爆特性试验研究.研究结果表明:在25,30Hz和40Hz下都能在乙烯/空气中成功触发爆震波,40Hz下产生C-J(Chapman-Jouguet)爆震波,传播速度为1724m/s(低于C-J爆震波速度理论值1832.45m/s的5.6%),峰值压力为3.01MPa(高于C-J爆震波压力理论值2.79MPa的7.88%).在相同结构下,汽油/空气未能完成由缓燃向爆震转变的过程.通过对比两种燃料下的试验结果发现:相对于气态燃料,液态燃料受其蒸发过程的影响,在爆震管内的火焰加速缓慢,需要更多的强化燃烧装置来加速火焰,带来的总压损失也更大.因此,对于液态燃料改善雾化和蒸发,提高可爆混气的质量是其实现低阻起爆的关键.      

一种实用的运输类飞机机翼/发动机短舱一体化优化设计方法

发展了一套基于遗传算法优化/Navier-Stokes方程分析的运输类飞机机翼/发动机短舱一体化设计方法,提出了一系列保证该方法工程实用性的解决方案,其中包括设计变量模块化、局部优化全机分析、超临界压力分布约束条件等。通过采用适当的计算网格、并行算法及数值方法,使得基于遗传算法优化/Navier-Stakes方程分析设计方法的运算时间在工程上能够接受。运用该设计方法对下单翼运输类飞机机翼/发动机短舱一体化设计开展了单点优化和两点优化,结合二者结果对比验证了该方法的有效性和工程实用性。单点优化得到的机翼压力分布呈现无激波特点,阻力系数随马赫数变化比较剧烈;两点优化得到的机翼压力分布为弱激波形态,阻力随马赫数变化比较缓和,所设计的机翼具有更好的鲁棒性和工程实用性。     

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。     

Experimental Investigation of Nozzle Effects on Thrust and Inlet Pressure of an Air-breathing Pulse Detonation Engine

Nozzle effects on thrust and inlet pressure of a multi-cycle air-breathing pulse detonation engine (APDE) are investigated experimentally. An APDE with 68 mm in diameter and 2 050 mm in length is operated using gasoline/air mixture. Straight nozzle, converging nozzle, converging-diverging nozzle and diverging nozzle are tested. The results show that thrust augmentation of converging-diverging nozzle, diverging nozzle or straight nozzle is better than that of converging nozzle on the whole. Thrust augmentation of straight nozzle is worse than those of converging-diverging nozzle and diverging nozzle. Thrust augmentations of diverging nozzle with larger expansion ratio and converging-diverging nozzle with larger throat area range from 20% to 40% on tested frequencies and are better than those of congeneric other nozzles respectively. Nozzle effects on inlet pressure are also researched. At each frequency it is indicated that filling pressures and average peak pressures of inlet with diverging nozzle and converging-diverging nozzle with large throat cross section area are higher than those with straight nozzle and converging nozzle. Pressures near thrust wall increase in an increase order from without nozzle, with diverging nozzle, straight nozzle and converging-diverging nozzle to converging nozzle.     

火星气囊气体发生器充气过程稳压仿真研究

文章对低温和常温环境下的气囊稳压充气过程的参数进行了仿真计算。主要分析计算了气囊内外壁的对流换热、囊内气体与囊壁间辐射以及水蒸气液化等传热方式的传热量。同时,计算了在不同环境温度下,气囊内气体温度、充气质量以及充气质量流率随时间的变化关系。分析结果可以为工程研制提供参考和数据支持。     

基于Stern-Volmer关系式的压力敏感涂料特性研究

Stern—Volmer关系式建立了荧光光强与表面压力之间的函数关系,是光学压敏涂料测压技术的理论基础和核心。从光化学的基本理论和基本模型出发,推导和整理出多种形式的SterwVolmer关系式,并简要评价分析了每种形式的特点及适用范围,同时,基于Stern-Volmer关系式衍生式,研究分析了压力测量值偏差、最优测压范围和压力灵敏度等压敏涂料特性参数的规律特点以及对PSP测量的影响,得出了一些对PSP测压技术工程应用具有重要参考意义的结论,     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.