复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。     

铸造SiCp／ZL101复合材料的组织与性能

本文利用半固态搅拌铸造法制备了ＳｉＣｐ／ＺＬ１０１复合材料，对其组织和某些性能进行了研究，结果表明：ＳｉＣｐ在基体中分布均匀，无严重团聚现象，与基体结合良好，与基体合金相比，耐磨性，硬度有显著提高。     

CuAl2／Al复合材料的固相反应合成技术及与Al液的接触反应研究

研究了Ａｌ，Ｃｕ在真空状态下的纯固相接触反应情况，试验表明，Ａｌ粉、Ｃｕ粉在６００℃，保温６ｈ时，两者以完全发生反生成ＣｕＡｌ２（θ相），生成的θ相沿铝基体组织晶界分布并在结晶过程中具有择优取向特性，形成仅含沿晶界方向的主干与垂直于晶界的二次晶轴的树枝晶形貌。     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

聚氨酯增韧改性 PISOX 树脂及其复合材料的性能

利用MDI与PTMG-2000制备聚氨酯预聚体,对聚(异氰脲酸酯-噁唑烷酮)树脂(PISOX)进行增韧改性:考察不同I/E、不同预聚体添加量的树脂浇铸体力学性能的变化;并对最优配方进行复合材料力学性能测试和DMTA测试,比较改性前后复合材料力学性能和耐热性能的变化;利用SEM观察改性前后微观形态的变化,推测增韧机理。结果表明,I/E=1.8、添加15%预聚体时树脂浇铸体综合力学性能最优,弯曲强度、弯曲模量、冲击强度分别为60.92 MPa、2 295 MPa、6.40 k J/m2;利用该基体制备复合材料,具有比未改性体系更优异的力学性能和界面性能,且聚氨酯预聚体的引入对树脂在高温下的耐热性能没有明显影响,其玻璃化转变温度均在258℃左右;对比改性前后体系固化物的微观结构,改性后的体系呈两相结构,橡胶相起到吸收冲击能和终止裂纹的作用,有效地提高了材料的韧性。     

智能加工技术在切削颤振在线抑制中的应用

具有薄壁结构的关键航空零部件在切削过程中不可避免发生颤振现象。为提高工件表面质量,在加工过程中对颤振进行准确识别和有效控制已成为该领域的主要研究方向。而对于颤振在线辨识和抑制功能的实现,必须开发集成先进传感器和智能控制算法的智能数控系统,并保证系统中各功能模块线程协调运行。因此,在航空薄壁件的精密加工过程中,利用智能加工技术对切削颤振进行实时辨识和在线抑制将成为未来数控加工技术的发展趋势。     

智能数控机床及其技术体系框架

首先简要介绍了数控机床的发展趋势,其次结合当前学术界及工业界的实践,对智能机床的概念进行了定义,然后提出了智能机床的技术体系框架,并详细阐述了智能数控系统、智能元器件以及智能化应用技术等智能机床中的关键技术.     

高燃速推进剂标准物质研究

在高燃速推进剂成熟配方的基础上选择标准物质的候选物,确定了合理的试样尺寸和制作工艺,制备了燃速定值范围在35~60、70~90、100~120 mm/s的3种高燃速标准物质。其均匀性和稳定性经考核合格后,采用多次定值试验确定其特性量值与不确定度。结果表明,高燃速推进剂标准物质可满足不同燃速范围燃速仪检定的需要,可确保测试结果准确可靠。     

格栅结构吸波性能探索研究

探索研究了格栅结构作为吸波结构的可能性,利用Floquet定理分析格栅结构传播电磁波的特性,通过传输线和等效电路法设计格栅结构,为展宽吸波频带和提高吸波性能,将电路屏引入格栅结构,结果表明当电路屏与格栅结构匹配时,含有电路屏的格栅结构在8～18GHz内反射率≤-5dB,在频率点为16.4GHz时最大峰值为-24.4dB.