某型发动机进气机匣联动环跑道裂纹修复技术研究

对某型发动机进气机匣联动环跑道裂纹故障进行机理分析,认为联动环跑道处的机加接痕明显,发动机工作过程中风扇一级转子叶片激起机匣振动,机匣本身强度不足,导致在故障部位萌生裂纹并扩展。采用激光熔覆+氩弧焊复合方式利用导热法原理进行修复,自制铜夹具进行导热,可以减少机件的形变量;通过改变坡口形式、减少金属熔覆填充量,改变激光熔覆的工艺参数,控制热输入量、单位能量密度,可以使形变量进一步减少,满足了产品尺寸和形位要求。     

固体推进剂复合型裂纹扩展数值计算

用粘弹性有限元法,分别以尖角形、椭圆形、圆形裂尖反映裂尖的变形,以最大周向应力准则和最大能量释放率准则作为裂纹扩展方向的判断依据,以J积分作为裂纹扩展的起始判据,计算了不同倾斜角裂纹的初始扩展方向.采用多个扩展步递增循环计算的方法,得到了不同倾斜角裂纹的扩展路径,并在扩展路径上设置粘结损伤单元,模拟了裂纹的动态扩展过程...     

裂纹萌生寿命预腐蚀影响规律

对不同预腐蚀时间的裂纹萌生寿命进行统计分析,并选取了4种函数形式对（CT）数据进行拟合对比分析。结果表明,指定裂纹尺寸的裂纹萌生寿命随腐蚀时间的增加而降低,在工程常用的时间范嗣内,若假定裂纹萌生寿命服从对数正态分布,指定裂纹尺寸的对数裂纹萌生寿命标准差与预腐蚀时间基本无关,单参数指数函数形式拟合的不同裂纹尺寸的C-T曲...     

基于材料微观特性的涡轮盘疲劳裂纹萌生寿命数值仿真

 为了研究材料微观特性对结构疲劳寿命的影响,根据Tanaka-Mura疲劳裂纹萌生寿命计算理论,模拟某镍基粉末合金涡轮盘喉道表面疲劳裂纹萌生寿命。利用泰森多边形生成法,模拟微观多晶结构,建立宏-细观模型相结合的三维仿真模型。实现3项关键技术:1)在三维模型中模拟了面心立方晶体中{111}面族的12条主滑移系;2)应用缺口根部裂纹萌生的Tanaka-Mura理论模型模拟一条微裂纹在另一条裂纹尖端萌生;3)模拟了微裂纹的起裂、扩展与联合过程,最终形成一条宏观裂纹。对某表面带刀痕涡轮盘疲劳裂纹萌生寿命数值仿真结果与真盘试验结果相差20%。研究表明,减小晶粒尺寸、降低表面粗糙度、形成表面压缩残余应变以及析出沉淀颗粒都有利于提高涡轮盘的疲劳裂纹萌生寿命。     

A new method to predict fatigue crack growth rate of materials based on average cyclic plasticity strain damage accumulation

By introducing a fatigue blunting factor, the cyclic elasto-plastic Hutchinson-Rice-Rosengren (HRR) field near the crack tip under the cyclic loading is modified. And, an average damage per loading-cycle in the cyclic plastic deformation region is defined due to Manson-Coffin law. Then, according to the linear damage accumulation theory-Miner law, a new model for predicting the fatigue crack growth (FCG) of the opening mode crack based on the low cycle fatigue (LCF) damage is set up. The step length of crack propagation is assumed to be the size of cyclic plastic zone. It is clear that every parameter of the new model has clearly physical meaning which does not need any human debugging. Based on the LCF test data, the FCG predictions given by the new model are consistent with the FCG test results of Cr2Ni2MoV and X12CrMoWVNbN 10-1-1. What’s more, referring to the relative researches, the good predictability of the new model is also proved on six kinds of materials.     

大型薄壁铸件铆接裂纹原因分析

某飞机上的一大型薄壁铸件在与蒙皮铆接时多次发生开裂,造成严重的安全隐患.通过对故障件进行的断口宏、微观检查,金相组织分析以及相关工艺试验,经综合分析讨论,明确了铸件铆接时出现裂纹的原因.结果表明:该零件铸造时变质处理不充分,材质塑性差,降低铆接时承受冲击的能力是导致开裂的主要原因,零件装配存在应力也是导致开裂的重要因素.     

恒幅及飞行模拟载荷下厚度对裂纹增长的影响

不同厚度试样的疲劳裂纹扩展试验及断口微观分析表明,恒幅加载低应力比飞行模拟载荷条件下具有明显的厚度影响。考查了模型对厚度影响的预测能力。Newman的模型具有预测厚度影响的潜力,广义改进的wellenborg模型不含有厚度影响的考虑,即使通过调整约束系数α的方法也不能计及厚度的影响。厚度对裂纹增长影响的物理原因及模型化有待于进一步研究。     

某型发动机滑油供油波纹管裂纹分析

某型发动机滑油进油管的波纹段多次发生裂纹故障,断裂部位均位于波纹管第1波谷或最后波谷处,采用断口分析、金相组织分析、断裂机理分析等方法,对滑油供油波纹管裂纹的断裂原因进行了分析。结果表明,装配时拉伸应力过大和工作中持续的振动应力是造成波纹管早期开裂的主要原因。结合实际经验,加强装配过程控制,提高装配质量,可有效预防滑油供油波纹管断裂故障。     

Comparative study between crack closure model and Willenborg model for fatigue prediction under overload effects

A comparative study is performed between a crack closure model and the Willenborg model, which can calculate the fatigue crack growth rate under the overload effects. The modified virtual crack annealing (VCA) model is briefly reviewed, which is based on the equivalent plastic zone concept. In this method, the retardation phenomenon is explained by the crack closure level variation, which is derived from the interactions between forward and reverse plastic zones ahead of the crack tip. As a comparison, the Forman equation in conjunction with the Willenborg model is also reviewed. The retardation phenomenon is described by directly modifying the stress intensity factor. It is known that the large plastic zone created by the overload can decelerate the fatigue crack growth rate until the crack grows beyond this region. A relationship between the plastic zone and the modified stress intensity factor is developed, which is a mathematical fitting equation instead of physical-based formulation. The experimental data in aluminum alloys are used to val-idate these two models. Overall, good agreement is observed between the model predictions and the testing data. It is noted that the approach based on modified VCA model can give more accurate prediction curves than the Willenborg model.     

气密机身纵向裂纹非线性鼓胀因子数值研究

为了研究不同几何参数包括壳半径、壳壁厚度和裂纹长度对鼓胀因子的影响,应用有限元软件ABAQUS,通过几何非线性有限元分析,计算含纵向裂纹无加强柱形壳鼓胀因子的数值,并与现有的经验公式进行对比,同时讨论双轴载荷比对鼓胀因子的影响。结果表明:大部分几何参数对鼓胀因子的数值有显著影响;现有经验公式存在局限性;当双轴载荷比从0.5增长到1.0时,鼓胀影响降低了约20%;当双轴载荷比从0.5降低到0时,鼓胀影响增加了约28%。