电弧风洞上的翼前缘烧蚀试验

介绍在CAAA的FD04电孤风洞上进行的翼前缘防热材料烧蚀试验结果.试验模型由高温陶瓷制成,后掠角53°,高75 mm,长55 mm,前缘半径2 mm,对称截面半锥角为5°.试验设备包括20 MW电弧加热器、混合室、矩形超声速喷管、试验段、轨道模拟系统及真空系统等.使用的矩形超声速喷管的马赫数为3.6,以3个台阶的轨道模拟翼前缘热环境,试验时间为77.0 s.试验结果表明高温陶瓷具有优良的抗烧蚀性能,两件试验模型在试验过程中均未出现破损现象,试验还得到了翼前缘模型试验过程中的内部温度响应.     

Damage sensitivity of a wing-type leading edge structure impacted by a bird

On the windward side of an aircraft, the components with higher probability of impact with birds are the wing-type leading edge structures, such as the wing and tail. A study on the damage sensitivity of a wing-type leading edge structure under bird strikes was presented in this paper. First, a bird strike test was carried out on a wing. The principles of the bird strike test equipment and method were introduced in detail, including the bird strike test system, bird projectile production process and data acquisition system. The dynamic strain measurement results, the high-speed camera videos, and the final deformation and damage morphology observations of the structure were obtained. Based on the coupled Smooth Particle Hydrodynamics (SPH) - Finite Element Method (FEM), the commercial software PAM-CRASH was used to simulate the process of a bird strike with the wing. The good agreement between the finite element simulation results and the experimental results shows that the calculation method and the numerical model presented in this paper were reasonable. On this basis, wing-type leading edge structures can be designed by adding triangular support. The bird strike resistances of an original structure and improved structure were studied by numerical simulation. The calculated results show that the improved wing-type leading edge structure is less damaged than the original structure under bird strike. The improved leading edge structure satisfied the anti-bird strike airworthiness requirements, as the thickness of the triangular support was 1.2 mm, and the weight of the structure was reduced by 0.87 kg compared with the original structure. This indicated that the bird strike resistance of the improved structure is better than that of the original structure, and the improved design of the wing-type leading edge structure presented in this paper is reasonable.     

DFCluster: An efficient algorithm to mine maximal differential biclusters for single pilot operations task synthesis safety analysis

With the continuous advancement of the avionics system, crew members are correspondingly reduced, and Single Pilot Operations(SPO) has attracted widespread attention from scholars.To meet the flight requirements in SPO mode, it is necessary to further strengthen air-ground coordination system integration, but at the same time, there will be some safety issues caused by resource integration, function fusion, and task synthesis. Aimed at the safety problems caused by task synthesis, an efficient d...     

Optimization and verification of single pilot operations model for commercial aircraft based on biclustering method

Commercial aircraft crews have experienced a trend from five-person crew to dual-pilot crew. Arised from both technological and market demands, Single Pilot Operations (SPO) is considered an important development direction in modern aviation technology. In this paper, starting from Dual-Pilot Operations (DPO), the piloting process, decision-making process and decision-making mode of DPO for commercial aircraft are studied to obtain the operational requirements of SPO. Then, based on above analysis, the operational mechanism of SPO is studied and the core technology of SPO mode is proposed. Next, a new closed frequent bicluster mining algorithm named FsCluster is proposed for the optimization of the SPO model, and the other efficient bicluster mining algorithm named TsCluster is proposed for the analysis and verification of the SPO model. Finally, a typical flight phase scenario is modelled by Magic System of System, and combined with the proposed algorithms for analysis and verification to determine whether the SPO mode can meet the DPO requirements.     

多波束三维成像激光雷达高精度收发匹配方法研究

三维成像激光雷达技术为空间地理信息获取、目标立体探测提供了新的技术途径。以多波束并行收发、单光子阵列探测为特征的新一代三维成像激光雷达可提升雷达探测灵敏度、激光成像帧频与成像效率，从而实现远距离快速激光三维成像。三维成像激光雷达的激光发散角与接收视场需角秒量级的匹配精度。随着系统波束数量的增加，几十甚至上百波束的高精度收发波束匹配是系统设计装调的难点。聚焦多波束单光子阵列三维成像激光雷达的收发匹配难题，设计了基于衍射分束激光发射与光纤阵列接收的收发光学系统，提出了一种多波束激光雷达收发波束匹配方法，并对该方法的收发匹配误差源以及温度对其影响进行了详细分析仿真。实验验证结果表明，可实现64波束优于10 μrad的匹配误差，在工作温度范围内总的收发失配优于20.78 μrad，满足本系统设计时25.5 μrad的收发匹配裕量，系统对环境温度有较好的适应性，具有良好的工程应用前景。     

高马赫数V字形钝化前缘平板表面压力特性

针对三维内转式进气道V字形唇口下游面临的严酷压力载荷问题，将唇口简化为V字形钝化前缘平板，在来流马赫数为6的条件下，采用数值模拟结合激波风洞压敏涂料测量方法，研究了半径比R/r = 0 ~ 20（V字形根部倒圆半径R与前缘钝化半径r之比）的平板表面压力演化特性。结果表明，随着R/r增大，V字形钝化前缘产生的三维波系结构发生变化，引起下游平板表面压力演变出4种类型。R/r较小时，V字形钝化前缘激波干扰产生的大范围流动分离，诱导形成了偏离中心线较远的分叉状高压区（Type Ⅰ，分叉型）；随着R/r增大，流动分离减弱，分叉状高压区逐渐消失，由透射激波扫掠壁面所形成的条带状高压和超声速射流对撞所形成的中心线高压区逐渐显露，依次出现过渡型（Type Ⅱ）、严酷型（Type Ⅲ）和渐匀型（Type Ⅳ）压力分布。平板上分叉型和过渡型的压力最大值仅为4.3 ~ 7.2p∞（p∞为来流静压），但V字形钝化前缘处的流场品质恶劣；严酷型的压力最大值，随着射流对撞强度的增强而增大，最高可达19p∞；渐匀型的压力最大值，随着射流对撞强度的减弱，逐渐趋近于二维钝前缘平板产生的压力最大值4p∞。     

基于天基边缘计算的在轨智能技术

针对低轨互联网星座的发展以及天基应用不断拓展对计算能力的需求,开展基于天基边缘计算的在轨智能技术研究,这对提升星地带宽利用率和实时决策效率具有重要意义.提出了以低轨卫星为核心的天基边缘计算架构,在此基础上,进一步提出了一种基于深度模仿学习的智能计算卸载模型,以及该模型的在轨分布式联邦学习训练方案.基于空天地海一体化网络...