基于Simulink的导弹三通道弹道仿真模型

运用MATLAB的Simulink工具箱建立起了导弹三通道弹道仿真模型 ,并给出一定条件下的弹道仿真结果 ,以此证明模型建立的正确性、实用性及兼容性。     

基于Matlab语言的系统可靠性仿真

Matlab是一种高性能数值计算语言 ,本文用Matlab语言编制系统可靠性仿真程序 ,并给出了具体实例。此方法比其他方法简单有效 ,可适用于复杂系统。     

HB-3000型布氏硬度计换向系统的改造

介绍了ＨＢ－３０００型布氏硬度计换向系统的改造方法及改造后硬度计的工作程序，并就改进效果进行了论述。     

非开普勒轨道下卫星交会变轨决策研究

针对卫星在非开普勒轨道下的运动特征,提出了研究卫星交会变轨决策的方法。首先,在Hill坐标下,采用比例导引方法求解卫星进行变轨机动时所需要的速度增量。然后,再通过Lagrange插值算法解出卫星在任意特征点上变轨机动所需要的速度增量,根据数字仿真得出大量的仿真数据并画出满足变轨决策条件的决策曲面。最后,对决策曲面的涵义做出分析,说明了该方法对于研究非开普勒轨道下卫星变轨决策问题具有一定的意义。     

自然通风和蒸发冷却在新疆建筑应用的数值分析

为了使新疆和田地区夏季在经济性合理前提下使室内通风环境满足人体热舒适要求。利用蒸发冷却技术将室外空气处理后送入室内，通过数值模拟分析得出在夏季室内负荷最大时刻采用机械辅助式自然通风，使得室温能够雏持在26-8℃，风速为0．6m/s，基本满足人体热舒适要求。在室外温度适宜的过渡季节采用Trombe墙和太阳能烟囱复合的自然通风系统，建筑太阳能烟囱的经济高度为10m。     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

槽对超声速混压式进气道性能及附面层的影响

为了提高定几何超 声速混压式轴对称进气道的性能，应用在进气道不同位置开槽的方法 ，研究了在各级锥体上、锥体的折角处开槽时锥体上的附面层变化；研究了多工况下开槽对进气道的总压恢复系数、流量系数、冲压比和起动性能产生的影响。结果表明开槽将改变超声速进气道头锥上的波系分布，使槽后附面层厚度增加。折角处开槽槽后附面层厚度比原型进气道增加16.7%，锥体上开槽比原型进气道增加33.3%。开槽使高马赫数下的总压恢复系数有所增加，其增加量随来流马赫数的变化而变化。在马赫数为4.0的设计状态下，折角处开槽可使进气道的总压恢复系数提高1.8%，锥体上开槽可以提高4.3%。之外，锥体折角处开槽对流量系数影响不大，还可以改善进气道的起动性能，降低起动马赫数。     

中纬突发E层特性的模拟分析

从基本的连续性方程出发，并结合运动方程，运用特征线方法求解，在合理的动力学假设条件下，模拟金属离子的汇聚，即Es层的形成．模拟的结果在一定程度上证实了风剪切理论的合理性．通过改变风场和电场模式的输入参量，使模拟的结果体现出不同当地时、不同季节的金属离子汇聚情况，讨论了模拟Es层峰值密度对风场和电场的周日和季节变化的响应，其结果与统计得到的Es层出现率的时间分布特征相似．     

斯特林制冷机真空环境模拟试验

文章针对空间红外遥感器应用特点,进行了斯特林制冷机的模拟真空环境试验。试验结果表明:温度环境和导热条件是影响斯特林制冷机空间应用的重要因素。