Can an impulsive variation of the solar wind plasma pressure trigger a plasma bubble? A case study based on CSES,Swarm and THEMIS data

During the August 25, 2018 geomagnetic storm, the new borne CSES-01 satellite and the Swarm A satellite detected a really large equatorial plasma bubble (EPB) in the post-midnight sector over western Africa. We investigated the features of this deep ionospheric plasma depletion using data from the Langmuir probes on-board CSES-01 and Swarm A satellites, and data from the high-precision magnetometer and the electric field detector instruments on-board CSES-01. Using also plasma and magnetic field data from THEMIS-E satellite we found that, during the passage of the magnetic cloud that drove the geomagnetic storm, an impulsive variation lasting about ten minutes characterized the solar wind (SW) pressure. The analysis of the delay time, between the occurrence of such impulsive variation and the detection of the plasma bubble, suggests a possible link between the SW pressure impulsive variation as identified by THEMIS-E and the generation of the EPB as detected by CSES-01 and Swarm A. We put forward the hypothesis that the SW pressure impulsive variation might have triggered an eastward prompt penetrating electric field that propagated from high to equatorial latitudes, overlapping in the nightside region to the zonal westward electric field, causing either a reduction or an inversion, at the base of the EPB triggering.     

内压作用下的航空轮胎爆破碎片动力响应

航空轮胎爆破时受内压释放的影响,爆破碎片的速度会有明显增加,而非与适航标准规定的与轮胎降落时的胎速相同。利用Fluent中用户自定义函数编写动力响应程序,采用动网格和用户自定义函数相结合的方法,展开内压释放作用下的轮胎爆破碎片速度动力响应特性的数值模拟研究。假设轮胎爆破失效是存在先前缺陷造成的,将碎片受冲击后的动态过程分解为内压释放冲击加速阶段和以一定初速度在空气阻力下减速运动两个阶段,提出仅考虑碎片两侧实时压力差作为动力源的简化物理爆破模型,来分析碎片的速度受内压作用的响应和整个流场压力以及速度变化情况,弥补了数学模型未考虑内外压平衡过程的不足,为预测轮胎爆破后碎片获得能量和爆破气流能量等提供数值参考,以便提出相应的安全防范措施。     

Cracking and Mechanical Properties of Airport Concrete Pavement with Fiber and Expansive Agent

Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties. The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared. The morphology of specimens is observed by scanning electron microscope, the time when the first crack occurred is recorded through slap test, and the mechanical properties such as compressive strength and impact energies of concrete are measured. The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack, improve the impact resistance obviously, and improve the compressive strength slightly. Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly, and improve the mechanical properties of concrete pavement slightly. The study provides recommendations for cracking control of airport concrete pavement in the future.     

民用飞机发动机舱灭火剂雾化数值模拟

针对民用飞机灭火系统的特点。使用商业软件FLUENT对民用飞机发动机舱着火后灭火剂的雾化过程进行数值仿真模拟．分析发动机舱着火状态下灭火剂喷射后舱内灭火剂浓度的分布情况,为民用飞机发动机灭火系统设计提供技术支持。     

基于ADAMS风洞柔壁喷管动力学仿真分析

基于刚柔耦合动力学理论,联合ADAMS和PATRAN/NASTRAN软件,对风洞柔壁喷管进行了动力学仿真,同时运用NASTRAN软件有限元分析了柔壁部件的非线性变形。比较两种计算结果发现,忽略柔壁变形的非线性,动力学仿真会存在较大误差。为此,采用分段线性化的方法,计入柔壁的非线性变形,改进柔壁喷管的动力学仿真模型。结果表明：改进后的动力学仿真准确度较高,可应用于柔壁喷管运动控制设计。最后,进一步分析了推杆驱动位移对柔壁结构强度的影响关系,为合理控制推杆驱动,确保柔壁无损伤提供必要的理论依据。     

考虑刚体/弹性耦合的飞机动稳定性研究

以大展弦比无人机为例,研究刚体运动对飞机纵向气动伺服弹性(ASE)稳定性以及弹性运动对飞机纵向飞行力学稳定性的影响。针对带有反馈控制的飞机,建立了时域的刚体/弹性耦合运动方程;以刚体运动频率与一阶弹性频率的比值为参数,分别研究有无刚体模态时的ASE系统稳定裕度和有无弹性模态时的飞行力学稳定裕度。数值仿真表明,当飞机刚体运动频率与一阶弹性频率的比值大于0.01时,飞机刚体运动对ASE稳定裕度的影响逐渐显现;当该频率比值大于0.03时,飞机弹性运动对飞行力学稳定裕度的影响开始突现;当该频率比大于1时,刚体弹性耦合效应不可忽略。     

基片集成波导滤波器设计与分析

文章应用基模和高次模设计了Ku频段的4阶椭圆函数响应滤波器,并对其仿真和实测结果进行了详细的分析;针对频偏和寄生耦合进行了仿真和结构调整,取得了性能优良的滤波器响应。     

刚柔耦合状态下索杆式伸展臂多体动力学研究

索杆式伸展臂在展开过程中,其斜拉索存在大运动和大变形问题,运用传统分析方法进行仿真分析难度较大.文章基于非线性弹性理论的绝对节点坐标方法,描述了斜拉索的空间运动和变形,研究了横向框架在贮存段、消旋段、提升段和套筒外的动力学特性,实现了索-刚体组成耦合系统的多体动力学数值仿真.     

星载光学遥感系统偏振耦合误差分析与修正方法研究

星载遥感器偏振灵敏度带来的偏振测量误差会影响获取数据的准确性,该误差作为系统误差将直接影响到数据应用.文章采用矢量辐射传输模型模拟遥感器(以中等分辨率成像光谱仪为例)入瞳处信号偏振与遥感器偏振耦合特性,分析了遥感器偏振灵敏度分别为2%、5%、7%时,遥感系统的测量误差分布情况,发现偏振耦合误差直接影响获取数据的真实性和...     

小型SAR卫星用双高特性锂离子电池技术

小型合成孔径雷达(SAR)卫星对储能电池系统提出了轻量化、大功率的要求,现有的SAR卫星用电池难以满足需求,急需开发高能量高功率的锂离子电池。采用兼具容量和功率性能的镍钴铝酸锂(LiNixCoyMnzO2, NCA)作为正极活性材料,高容量中间相炭微球(MCMB)作为负极活性材料,显著提升了电池体系的容量和比能量。通过设计极片的活性物质载量和电解液用量,保证了电池功率性能(≥10 C)的发挥;通过加大电极片面积和极柱尺寸,控制了大倍率放电时电池温升。研制了兼顾高比能和高功率的锂离子电池单体,额定容量20 Ah,1 C放电比能量达到180 Wh.kg^-1,且10 C放电容量相较1 C保持率96.24%,15 C下持续放电比功率超过2 000 W.kg^-1,可以满足下一代轻小型SAR卫星能源供电需求。