Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

Passive localization by a single moving observer using TOA only with unknown SRI: Observability analysis and algorithm

Passive localization by a single moving observer using Time of Arrival (TOA) only with an unknown Signal Repetition Interval (SRI) is investigated in this paper. Observability analysis is performed first. The observability condition for uniquely determining the emitter position and SRI is derived. The conditional Cramer-Rao Lower Bound (CRLB) is also analyzed. It is found that the ambiguity of the SRI integer of the first TOA does not affect the theoretical estimation precision of the emitter position and SRI. A Reference-Fixed Differential TOA (RFDTOA)-based Iterative Maximum Likelihood Estimator (IMLE) is proposed, which only needs O(M) computational operations. Theoretical analysis and simulation results show that the Mean Square Error (MSE) of the proposed algorithm could attain the CRLB with moderate Gaussian measurement noise.     

风云二号卫星 CDAS 原始云图解调器

在传统四次方环基础上提出了一种适用于快捕的新方法——四次方环开关法;根据这一原理研制的风云二号ＣＤＡＳ原始云图解调器具有捕获快,捕捉带宽,误码率性能好等特点;经测试及实用证明,此解调器性能优良,完全能满足实际需要。     

智能化VXI总线高性能同步数据采集模件的设计

介绍了一种基于VXI总线的高速隔离智能同步数据采集模件的设计方案 ,分析了主要电路的技术要点和实现方法     

北斗三号系统卫星自主完好性监测技术

完好性对于全球卫星导航系统(GNSS)来说至关重要,关乎到其能否被放心应用。卫星自主完好性监测(SAIM)技术,是完好性监测技术发展的前沿趋势,国内外卫星导航系统均竞相发展。介绍了北斗三号系统SAIM技术设计与实现的重要意义,从功能设计和实现原理两个方面,阐述了北斗三号SAIM技术体制。针对SAIM实际在轨监测数据的正态分布特性服从程度和长期稳定性等问题,随机选取某一颗中圆轨道(MEO)卫星自2020年7月31日北斗三号系统正式开通服务以来至2021年7月31日连续1年期间的监测数据,得到真实在轨监测数据的分布特性。最后,提出了告警门限优化、分级告警策略设计、星历完好性自主监测等方面的后续发展必要性建议,旨在为北斗系统更好地为全球用户提供更优质的完好性服务提供参考。     

用于识别双星故障的RAIM算法

由于传统的基于识别门限的卫星故障识别算法存在漏检和误警致使识别率较低,为此提出一种可用于识别双星故障的接收机自主完好性监测算法.该算法通过构造新的奇偶矢量与故障特征平面,利用奇偶矢量与故障特征平面之间的几何关系来识别卫星故障,使得算法不再受限于识别门限的影响,从而有效地避免了由于识别门限引起的识别效率较低的问题.计算机仿真结果表明:改进后的算法与传统的基于识别门限的算法相比,双星故障正确识别的性能有显著的提高,正确识别率可达到90%.同时,与基于门限识别的重构最优奇偶矢量法相比,计算量可减少约61.2%以上.     

基于循环谱的隐蔽通信性能分析

研究了基于扩频技术的隐蔽通信波形设计,采用大信号掩盖技术和跳码扩频技术,其中大信号和隐蔽信号分别以直接序列扩频(Direct Sequence Spread Spectrum, DSSS)和随机跳码扩频方式产生。对DSSS信号和随机跳码扩频信号的二阶循环平稳特性进行了理论分析,并通过仿真证明了循环平稳特性可用于隐蔽通信波形循环谱分析。首先,理论分析揭示DSSS信号的循环谱在与数据符号速率和码片速率相关的循环频率上,具有由信号的循环平稳性所产生的一系列特征峰值;然而,在随机跳码直扩信号中,扩频码带来的循环平稳性被破坏,导致其循环谱仅在与码片速率相关的循环频率上存在特征峰值;最后,利用循环平稳特性,结合判决门限进行隐蔽信号检测的仿真和分析。     

Performance analysis and application on Ti-6Al-4V of micro-forging system

Micro-forging (MF) is a novel surface modification technology which is capable of smoothening and strengthening the workpiece surface simultaneously. Based on analysis of the mechanism and energy conversion of micro-forging process, an electromagnetically driven micro-forging system is developed. To further grasp the kinetic characteristic of the equipment, a simulation model is established and its accuracy is verified. With the help of simulation and experimental results, we propose an input voltage optimization method, which drives the micro-forging head moving in a uniform and stable way. In this study, the influence of MF on surface integrity of Ti-6Al-4V (TC4) is firstly reported. Experimental results show that MF treatment reduces surface roughness (R_a) and increases micro-hardness by 48% and 11.8% at most, respectively. Besides, a compressive stress layer with an amplitude of −1000 MPa and a depth of 0.8 mm is observed. This study analyzes the performance and reveals the potential of micro-forging technology, which lays a solid foundation for expanding its application in TC4 surface modification.     

一种干扰信号产生单元的设计CSCD

雷达干扰系统是复杂电磁环境下的重要作战装备。干扰信号产生单元能够针对雷达信号的差异,产生针对性的干扰信号。本文阐述了干扰信号产生单元的系统组成,主要组件—频综、变频组件和DRFM组件的设计,并提出了设计中的关键技术——直接式数字频率合成及瞄频噪声产生单元的解决途径。测试结果表明,该干扰信号产生单元能够满足系统的技术指标要求。     

基于蓝牙4.0的接近度分类室内定位算法

蓝牙4.0技术已经广泛应用于手机、平板电脑等移动终端设备,使得利用其实现室内定位具有极其广阔的应用前景。通过对蓝牙4.0技术的研究,根据蓝牙4.0 RSSI损耗特征进行接近度分类,提出一种限定区域k-近邻改进算法。实验结果表明,运用优化后的RSSI指纹定位算法室内定位平均误差可达到dm级,可充分满足商用室内LBS“m级”的定位精度和“s级”响应的需求。