Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

铁磁构件应力集中的计算机模拟和磁记忆检测

本文应用ANSYS有限元软件模拟典型构件圆孔板应力场的分布，通过有限元解与解析解对比分析，说明ANSYS软件计算的可靠性和准确性。为进一步研究典型构件的应力分布与漏磁场强度之间的关系，完善磁记忆检测的理论基础提供了一种重要的手段。     

基于高速存储平台的高性能RS编译码器设计

目前,星载高速存储设备中采用商用RS编译码IP核来实现数据纠错功能,能够实现的编译码最高速率为800 Mbps,只能依靠多个IP核同时工作达到吉比特高速数据存取速率的要求。星载存储数据发生错误的主要原因是存储区单粒子翻转和存储介质本身特性产生的单比特数据错误。针对星载存储数据的误码特性,本文提出一种RS编译码改进算法,通过对编码算法中的剩余多项式及译码算法中的伴随多项式进行降次处理,减小编译码过程中运算的迭代次数及计算量,以及对编译码算法中的基本运算单元有限域乘法器采用子项复用技术,实现对传统RS编译码算法的改进。结果表明改进后的编译码器能达到最高数据速率为10.5 Gbps,编码器资源较单个商用IP核减少15%,译码器资源减少40%,能够满足后续高速存储平台的应用要求。     

一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

星载SAR成像处理系统中多线程矩阵转置的设计和实现

矩阵转置被广泛地应用在星载合成孔径雷达的地面成像处理中,由于对原始回波数据快速成像的需求,根据现有共享内存系统的特点,提出利用多线程矩阵转置的并行处理方法。在Linux环境下,利用基于Pthread的线程调度方法和封装类,在研究和分析矩阵转置的几种处理方法的基础上,设计和实现多线程矩阵转置。通过在HP Proliant DL580平台上的实验证明,多线程矩阵转置与传统的矩阵转置相比,能充分利用处理器的资源,具有良好的并行扩展性,有利于进行快速成像处理。     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

基于查表的开环MPM预失真器

提出了一种基于查表的开环记忆多项式模型(MPM,Memory Polynomial Model)预失真器.从MPM预失真器系数估计和执行信号预失真处理两方面加以考虑.首先,利用预失真器和高功率放大器(HPA,High Power Amplifier)传输特性的互补性,由采集到的HPA输入、输出基带数据进行单次最小二乘估计得到MPM预失真器的系数,避免了以往递归结构的收敛性和计算量大等问题.然后,利用MPM预失真器的特点,建立了基于输入信号强度索引的一维向量表,通过查表实现MPM预失真器的幂次累加项,极大地减少了实现预失真器所需的计算量及硬件开销.仿真显示,采用提出的预失真器可以有效补偿HPA对信号的记忆非线性失真,有效带宽内获得了近20 dB的功率改善,也显著改善了系统误码性能.     

Revisiting Perspective-Taking: Can People Maintain Imagined Perspectives?

Abstract

Three experiments were conducted to examine whether people can adopt and maintain imagined perspectives in the absence of target information. The task used entailed providing information about an imagined perspective in advance of target information to examine whether this would facilitate perspective-taking performance and reduce or eliminate alignment effects that are commonly reported in the literature. The three experiments employed different types of spatial environments: an environment learned from navigating a computer screen (Experiment 1), and an immersive environment that was either remote (Experiment 2) or immediate (Experiment 3) at the time of retrieval. Across the three experiments, results showed that information about an imagined perspective can be utilized ahead of target information. Furthermore, they suggested that alignment effects can be reduced as a result of processing information about perspective ahead of target information, but only when reasoning about specific nonimmediate spatial relations (Experiments 1 and 2). Results are discussed in connection with previous findings on spatial updating and the organizational structure of spatial memory.     

An Investigation into Vertical Bias Effects

ABSTRACT

In three experiments, after exploring a virtual environment (VE), adult participants made spatial judgments about the location of target objects that were higher and lower than their perceived test location within the VE. In Experiment 1, the locations of the target objects were inferred from verbal instructions. The main results were a tendency to judge objects as closer to the horizontal plane than their true locations, and more efficient downward than upward judgments. Both effects generally accord with findings reported by Wilson et al. (2004a Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004a. Memory for targets in a multilevel simulated environment: Evidence for vertical asymmetry in spatial memory. Memory & Cognition, 32: 283–297. [Crossref] , [Google Scholar], 2004b Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004b. Memory for targets in a multi-level simulated-environment: A comparison between able-bodied and physically disabled children. British Journal of Psychology, 95: 325–338.  [Google Scholar]). In Experiments 2 and 3, which were closely modeled on the design of the Wilson et al. studies, regression to the horizontal plane was noted but no downward bias was observed. A misperception in the viewing height between the floors and ceilings of the virtual rooms was apparent in both experiments. The results from the present study together with earlier investigations suggest different hierarchical encoding of between-axis and within-axis information.     

聚氨酯改性环氧树脂形状记忆材料

以甲基四氢邻苯二甲酸酐(METHPA)为固化剂,利用自制的聚氨酯预聚体(PU)改性环氧树脂(TDE-85)制备形状记忆聚合物。研究了形状记忆环氧树脂的力学性能、Tg和形状记忆性能。研究表明,形状记忆环氧树脂的韧性得到明显的提高,Tg得到了相应的下降,形状记忆性能良好,形状回复率皆在96%以上,形状固定率约达100%。