自动油门控制技术在舰载机上的应用

着舰技术是舰载机应用的一项高难技术,自动油门控制作为一项有效的着舰辅助手段,通过进场动力补偿,可有效提高舰载机着舰轨迹稳定性,进而显著提升着舰精度及着舰成功率。介绍了自动油门控制技术的起源、着舰需求、基本组成和控制原理,并对其未来发展前景进行了展望。     

Numerical study on flow control of ship airwake and rotor airload during helicopter shipboard landing

A numerical study on flow control of ship airwake during shipboard landing is carried out to address the effect of flow control devices on helicopter rotor airload. The in-house Reynolds Averaged Navier-Stokes (RANS) based solver Rotorcraft AeroDynamics and Aeroacoustics Solver (RADAS), with combination of momentum source approach is employed to conduct the helicopter shipboard landing simulation. The control effects of three aerodynamic modifications of ship superstructure, i.e. ramp, notch and flap, in different Wind-Over-Deck (WOD) conditions are discussed. From the steady simulation results, the effect of spatial variation of ship airwake on rotor airloads is concluded. The aerodynamic modifications reduce the strength of shedding vortex and increase rotor normal force through delaying and relieving flow separation, and therefore are beneficial to alleviate the limitation of control inputs. By contrast, the perturbation of unsteady ship airwake can cause the serious oscillation of rotor forces during shipboard landing. The unsteady simulations show that the turbulence intensity of ship airwake and oscillatory rotor airloading, represented by Root-Mean-Square (RMS) loading, can be remarkably reduced by the ramp and notch modifications, while the flap modification has adverse effect. It means that flow control devices have large potential benefits to alleviate the pilot’s workload and improve the shipboard landing safety, but they should be well designed to avoid the introduction of more vortex, which leads to increase in disturbance of flow field.     

增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。     

Stability and shape analysis of relative equilibrium for three-spacecraft electromagnetic formation

The invariant shapes for close formation flying with inter-craft electromagnetic force ensure several potential space applications. However, the 6-DOF relative equilibrium problem has not been systematically investigated. This paper mainly analyzes the invariant shapes of relative equilibrium for the three-spacecraft electromagnetic formation, and studies the families of invariant shape solutions with real and constant magnetic moments as well as their linear stability. The problem is examined based on the full nonlinear coupled dynamic models for collinear and general triangular configurations. The relative equilibrium conditions are analyzed to determine whether an invariant shape do exist, and the corresponding families of invariant shape solutions are identified for static and spinning configurations respectively. Finally, the linear stability of such invariant shapes is numerically discussed, which have shown that most invariant shapes are unstable and controllable.     

卫星变轨对航天扫描式TDICCD相机系统参数的影响

文章主要介绍和分析卫星变轨对TDICCD相机系统的MTF、扫描周期的影响，最后分析卫星变轨对卫星覆盖范围的影响。     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

一种模糊飞行冲突实时检测方法研究

为了解决飞行冲突检测中虚警和漏警问题，提出飞机之间的模糊空间接近度概念以及一种模糊冲突检测方法。该方法通过实时计算飞机对之间垂直接近度与水平接近度，并使用模糊推理规则来判断飞机当前相对接近趋势以及是否存在冲突。仿真实验表明：该冲突检测方法能有效减少飞行冲突的虚警和漏警。     

INVESTIGATION OF TIGHTLY COUPLED SINS/GPS INTEGRATION MIDCOURSE GUIDANCE FOR AIR-TO-AIR MISSILES

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＴＩＧＨＴＬＹＣＯＵＰＬＥＤＳＩＮＳ／ＧＰＳＩＮＴＥＧＲＡＴＩＯＮＭＩＤＣＯＵＲＳＥＧＵＩＤＡＮＣＥＦＯＲＡＩＲ┐ＴＯ┐ＡＩＲＭＩＳＳＩＬＥＳＦｕＬｉ（富立），ＦａｎＹａｏｚｕ（范耀祖），ＮｉｎｇＷｅｎｒｕ（宁文如）（Ｆ...     

M/G/1排队系统性能梯度估计的非标准分析法

如何估计系统性能梯度是离散事件动态系统研究中的一个重要问题.系统性能对于概率参数的梯度无法用传统的摄动分析法来估计,我们从非标准分析的角度提出了一种基于Dirac δ函数的摄动分析算法,分析了相应估计量的强相合性和渐近无偏性.新算法在实现过程中需要用样条函数来近似δ函数,但可以同时估计M/G/1排队系统中顾客期望系统时间和忙期期望长度对概率参数的梯度.数值实验结果表明估计量的相对误差和无偏性检验值都比较小,新算法能够很好地估计M/G/1排队系统的性能梯度.     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.