某型飞机起落架收放系统仿真与性能分析

起落架收放系统的性能对整机的安全性和舒适性具有直接影响。以国产在研某型飞机起落架收放系统为研究对象,利用该型飞机起落架收放机构的数学模型,采用LMS Virtual.Lab Rev的Motion模块和LMS Imagine.Lab AMESim软件进行起落架机构3D和起落架液压控制系统1D联合仿真,利用该联合仿真模型研究气动载荷对起落架收放系统的影响和上位锁阻尼参数对起落架收放性能的影响。结果表明:采用理论计算数值能够实现起落架在有限时间里的收放任务,考虑了气动载荷情况的仿真结果符合实际趋势;上位锁阻尼可作为优化设计的优先选取参数。     

跨声速叶栅抽吸流、激波以及分离流相干效应

以某高负荷、跨声速压气机叶栅为研究对象,应用数值模拟手段探讨通过抽吸控制激波从而控制附面层发展的可行方法。研究结果表明：随着抽吸量的增加吸力面马赫数峰值提高,激波损失增加,同时使得吸力面马赫数峰值点位置后移,附面层分离减弱,分离的减弱所导致的总压恢复系数增加量要远大于激波强度增加所导致的总压恢复系数减小量;抽吸对叶栅性能改善存在一个最佳抽吸量1.2%;在保证叶栅静压压升不变的前提下,相对于未抽吸条件1.2%抽吸使得叶栅总压恢复系数提高10%,扩散因子降低18%,落后角减小5°;通道激波后实施附面层小流量抽吸不能有效改善附面层内部流动参数,当实现前缘入射斜激波投射点位于通道激波上游时,叶表附面层流动得到较大改善。     

舰船机舱内测温系统准确性试验与分析

为研究舰船机舱内测温系统的工作情况,对两型舰船的热电阻测温系统和热电偶测温系统进行了试验。分别在机舱环境内和实验室环境内对相同的测温系统进行了测试,结果表明热电阻测温系统受机舱环境影响较小,能够准确地监测温度;热电偶测温系统受机舱环境影响较大,测量结果在高温段产生了失真,本文分析了热电偶测温系统产生偏差的原因。     

Magnetogasdynamic shock wave generated by a moving piston in a rotational axisymmetric isothermal flow of perfect gas with variable density

The propagation of a strong cylindrical shock wave in an ideal gas with azimuthal magnetic field, and with or without axisymmetric rotational effects, is investigated. The shock wave is driven out by a piston moving with time according to power law. The ambient medium is assumed to have radial, axial and azimuthal component of fluid velocities. The fluid velocities, the initial density and the initial magnetic field of the ambient medium are assumed to be varying and obey power laws. Solutions are obtained, when the flow between the shock and the piston is isothermal. The gas is assumed to have infinite electrical conductivity and the angular velocity of the ambient medium is assumed to be decreasing as the distance from the axis increases. It is expected that such an angular velocity may occur in the atmospheres of rotating planets and stars. The shock wave moves with variable velocity and the total energy of the wave is non-constant. The effects of variation of the initial density and the Alfven-Mach number on the flow-field are obtained. A comparison is also made between rotating and non-rotating cases.     

摇摆对水平管内单相水阻力特性的影响分析

对摇摆状态下25mm和34.5mm管径水平管内单相水阻力特性进行了实验研究,通过实验发现,摇摆状态下单相水摩擦压降有明显的周期性,并与摇摆周期相同。雷诺数降低、摇摆振幅增加以及管径增加都会使摩擦压降增加。通过对摇摆周期、摇摆幅度、雷诺数和管径等影响因素的分析,给出了摇摆状态下单相水摩擦系数的计算公式。计算结果表明,得到的摩擦压降满足摇摆条件周期波动的特点,计算结果与实验结果符合较好。     

氧化锆陶瓷基高温自润滑材料

为了,解决较宽温域范围内特别是高温下材料的润滑问题,本文采用热压烧结方法制备了一系列含各种不同固体润滑剂(Mo、MoS2、BaF2、CaF2、BaF2/CaF2、CuO)的氧化锆基高温自润滑陶瓷复合材料.其中ZrO2(Y2O3)-Mo-BaF2/CaF2系列复合物在800 ～1 000℃表现出较低的摩擦因数,在1 000℃摩擦因数低至0.28左右,已接近工程应用的许用值;另一种ZrO2(Y2O3)-MoS2-CaF2系列复合物同SiC陶瓷球对磨时在800～1 000℃内摩擦因数为0.30 ～0.22,具有较好的摩擦磨损性能.     

耐高温氟醚橡胶粘接工艺研究

阐述了耐高温氟醚橡胶粘接的难点，分析了传统工艺的缺点。经过大量试验及细致分析，在工艺上进行了大胆摸索，通过工艺方案调整，使粘接强度有了大幅度提高，粘接分布均匀，效果良好，耐高温性能十分稳定，完全能满足使用要求，产品的稳定性和安全性得到保障。     

航空电瓶内阻测量与剩余容量探讨

论述了电瓶内阻的基本测量方法。利用３５５０电瓶内阻测试仪对典型的航空电瓶进行实际测量，结果表明，对于酸性电瓶判断比较正确，而对碱性电瓶判断不正确。     

The structure of Kelvin–Helmholtz vortices with super-sonic flow

We have done two-dimensional simulations of the Kelvin–Helmholtz instability (KHI) with super-sonic flow using the CIP method. The linear analyses of a simple uniform density case show that the KHI cannot grow vigorously when the velocity jump is more than twice the sound speed (when the flow speed relative to the vortex is super-sonic). In this study, by situating a high density contrast across the shear layer, we set the flow in only one of the sides to be super-sonic and then show that the KHI does grow and rolls up a vortex. The formation of a shock is essential for the KHI vigorous growth and the structure of the vortex is strongly influenced by the shock geometry. The results should have substantial implications to velocity shear layer dynamics involving large density jump, such as planetary magnetospheric boundary layers.     

Planar laser scattering visualization of streamwise vortex pairs in a Mach 6 flow

A series of cross-sectional flow fields of Counterrotating Vortex Pairs(CVPs) generated by a large-scale ramp vortex generator is observed using an ice-cluster-based Planar Laser Scattering(PLS) method in a shock tunnel with a nominal flow Mach number of 6. Combined with a numerical simulation, two streamwise CVPs with opposite rotating directions are identified in the wake flow of the vortex generator with an absence of a boundary layer, namely, a Primary CVP(PCVP) and a Secondary CVP(SCVP). Th...