具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。      

关于建立高阶差分格式的问题

为了能在不太密的网格上捕捉到流场的细致结构。通常采用高阶精度的差分 式进行数值模拟。为能抑制计算中和在激波附近产生的虚假波动,本文从物理构思出发,提出了建立高阶格式的两个基本原则,作者称之为抑制波动的原则和稳定性原则。     

跨音弯掠风扇转子叶片的气动弹性剪裁

跨音风扇进口级增压比的进一步提高,主要受两方面的制约,一是效率,二是气动弹性失稳。这两个因素与转子流场中的激波和激波诱导的大尺度分离紧密相关。激波结构又和转子叶片前缘空间曲线形状直接联系。因此,如何精心设计转子叶片前缘空间曲线形状来控制激波结构,就成了当代风扇气动力学的前沿,并导致风扇弯掠空气动力学概念的出现。在具体设计中,此问题可称之为气动与气动弹性综合剪裁。本文简述综合剪裁中的一个组成部分,即气动弹性剪裁问题,并对一个单级风扇转子叶片给出实例。     

激波-边界层-分离流相互干扰三维湍流的数值模拟

本文采用数值方法求解时间相关三维可压缩雷诺平均Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程组,模拟激波—边界层—分离流相互干扰三维湍流流动。湍流模型为Ｂａｄｗｉｎ－Ｌｏｍａｘ两层代数模型,改进后用于三维内流问题。采用单元中心有限体积法离散流场控制方程,ＶａｎＬｅｅｒ矢通量格式计算无粘通量,中心差分法计算粘性通量,ＬＵＳＧＳ时间推进格式计算定常流场。本文以二元跨音速扩压器内三流动为算例,数值模拟较强激波—边界层—分离流相互干扰维湍流流动,并与实验结果进行了比较。数值模拟结果,在激波强度、分离点位置和再附点位置等方面,与实验结果吻合较好。     

A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

航天器火工冲击技术研究进展

系统总结了国内外航天器火工冲击环境预示、地面试验和减冲击技术三个方面的研究进展,并分析了国内在以上三个方面与国外航天强国的差距。在此基础上,从我国航天工程实际需求出发,分析指出了今后航天器火工冲击领域应重点开展的研究方向。     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

二元高超声速进气道激波振荡特性实验

通过在进气道/隔离段模型出口附近设置固定的堵塞楔块提高反压,并采用高速纹影拍摄同步壁面压强测量的手段,在马赫数5.9的激波风洞中研究了二元高超声速进气道在不同堵塞度下的流动特征。研究结果表明,在较低的堵塞度下,进气道仍然能够保持起动状态,而在较高的堵塞度下,进气道出现激波振荡。上游产生的压缩波/激波在节流段的反射是出现激波振荡的重要原因之一。随着堵塞度的增加,激波振荡的频率有所升高。     

吸气式高超声速推进助推段内流振荡及其抑制

为了掌握高超声速飞行器盲腔流场的激波振荡机理,采用"双时间步"方法对轴对称吸气式高超声速飞行器内流道盲腔流场进行了非定常数值模拟。结果表明,飞行器内流道出现了非定常激波振荡现象,内流道壁面压力出现了低频高幅的周期性变化。为了消除高超声速飞行器内流道的激波振荡现象,设计了级间段泄流方案,对飞行器进行了内外流一体化定常和非定常的数值模拟。结果表明,级间段泄流方案可以有效地消除内流道的激波振荡现象。     

旋转爆轰的三维数值模拟

旋转爆轰利用爆轰波在燃烧室的供气端传播,而爆轰产物从另一端排出。为了揭示其宏观特性,采用带化学反应的三维Euler方程,在贴体坐标系中,利用带限制函数的波传播算法,对圆环形燃烧室内的旋转爆轰进行了数值研究,讨论了爆轰传播过程中的波系结构。数值结果表明,即使仅在燃烧室内壁面的部分区域充入可燃气,爆轰波也能够以旋转方式在该区域稳定传播。