基于改进SST模型的分离流动数值模拟

对SST湍流模型进行了改进,并通过对典型分离流动进行数值模拟,来检验和提高模型预测分离流动的能力.基于亚声速分离流动,提出了提高雷诺应力的模拟精度和分离流修正的改进方法,并进行了对比研究得出结论;在亚声速分离流动分析结论基础上,采用了可压缩性修正方法,开展了跨声速、超声速和高超声速激波/边界层干扰分离流动的数值模拟研究.结果表明:提高雷诺应力的模拟精度和采用分离流修正明显地提高了SST湍流模型对分离流动的模拟能力;适当地可压缩性修正对超声速和高超声速分离流动的计算精度有改善作用.     

空气节流对超燃燃烧室火焰稳定影响的数值研究

空气节流通过在流场中产生激波串,有效地辅助燃料实现稳定燃烧。非定常数值模拟研究了空气节流对超燃燃烧室燃料稳定燃烧的影响,分析了节流实现燃料稳定燃烧的机理。结果表明:在燃烧室入口马赫数2、静温548.8K、静压0.1MPa,乙烯燃料当量比为0.5,先锋氢辅助点火的条件下,距离发动机入口845mm处,30%入口空气流量的节流流量有效地实现了燃料的稳定燃烧,激波串是实现燃料稳定燃烧的根本原因,节流参数对节流效果有着较大的影响。     

机匣转静刮磨后轴流压气机气动性能评估研究

为揭示机匣可磨耗涂层磨损造成的叶尖间隙和粗糙度变化对压气机气动性能的影响规律,针对不同刮磨形貌下Rotor 37转子性能进行了数值模拟研究。结果表明,压气机等熵效率和出口流量对刮磨间隙和粗糙度的变化较为敏感,降幅最高可达1.78%和0.83%,而压比变化不大;刮磨间隙深度增加,刮磨最深位置前移时,叶尖泄漏增强,泄漏流与上端壁附面层及主流相互作用演变为泄漏涡,与激波相互干涉,造成较大的叶尖损失;压气机气动性能受磨损区域粗糙度影响较小,虽然等熵效率对粗糙度变化较为敏感,但最大降幅也仅为0.38%。磨损区域粗糙度增加时,近壁区湍流波动加强且气流更易分离,引起叶尖泄漏流和叶片尾迹区域的流动结构变化,使压气机气动特性向低流量方向偏移。     

高能电弧等离子体激励控制双压缩拐角激波/边界层干扰实验研究

超声速/高超声速飞行器进气道入口处多采用多级压缩构型,其诱导的激波/边界层干扰严重影响进气道效率和飞行器的气动性能,因此对双压缩拐角激波/边界层干扰进行流动控制具有较强的应用背景。在来流速度为Ma=2.0的风洞内,针对三种典型的双压缩拐角构型,开展了高能流向脉冲电弧放电阵列调控双压缩拐角激波/边界层干扰的实验研究,并对激励流场的高速纹影图像进行了空间梯度阈值处理和均方根处理。结果显示,在激励的作用下两道分离激波的强度均减弱,验证了利用高能流向脉冲电弧放电阵列控制双压缩拐角激波/边界层干扰的可行性。在分析控制效果的基础上,获得了在不同构型拐角的流场中前驱冲击波列和控制气泡的演化规律,结合控制效果的时序特征,最终揭示了高能流向脉冲电弧放电阵列作用于双压缩拐角激波/边界层干扰的前驱控制和接续控制的接力控制机理。     

Cosmological Shock Waves

Large-scale structure formation, accretion and merging processes, AGN activity produce cosmological gas shocks. The shocks convert a fraction of the energy of gravitationally accelerated flows to internal energy of the gas. Being the main gas-heating agent, cosmological shocks could amplify magnetic fields and accelerate energetic particles via the multi-fluid plasma relaxation processes. We first discuss the basic properties of standard single-fluid shocks. Cosmological plasma shocks are expected to be collisionless. We then review the plasma processes responsible for the microscopic structure of collisionless shocks. A tiny fraction of the particles crossing the shock is injected into the non-thermal energetic component that could get a substantial part of the ram pressure power dissipated at the shock. The energetic particles penetrate deep into the shock upstream producing an extended shock precursor. Scaling relations for postshock ion temperature and entropy as functions of shock velocity in strong collisionless multi-fluid shocks are discussed. We show that the multi-fluid nature of collisionless shocks results in excessive gas compression, energetic particle acceleration, precursor gas heating, magnetic field amplification and non-thermal emission. Multi-fluid shocks provide a reduced gas entropy production and could also modify the observable thermodynamic scaling relations for clusters of galaxies.     

Observing the Sun at 20–650 MHz at Thermopylae with Artemis

Fine structure of type IV radio solar bursts with a great variety and complexity often give much information in different ways and enable estimation of various coronal characteristics. In this work, we expose our new method for fine structure revealing and separation of two basic kinds of type IV fine structure, as fibers and pulsations. We also estimate frequency drift of fibers from dynamic spectra, clean from continuous background, with a prototype method using 2-D Fourier transform and we estimate periodicities of fibers as well as pulsations with continuous wavelet transform. Working with the last method we found periodicities close to 3 min umbral oscillations and 5 min global solar oscillations.     

具有操纵面间隙非线性二维翼段的气动弹性分析

 基于Theodorsen 理论和Wagner 函数,提出了不可压缩流作用下三自由度二维翼段任意运动非定常气动力表达式。对操纵面自由度具有的间隙非线性,建立了二维翼段气动弹性系统无量纲分段线性运动方程。数值仿真预示了系统极限环振动的相轨迹、无量纲振动幅值和频率,表明操纵面铰链处存在的间隙非线性将导致整个系统的极限环振动;随着来流速度的增加,系统极限环振动的幅值和频率都存在跳跃现象。     

无导叶对转涡轮三维流场数值分析

1引言近年来,研究者在1 1/2对转涡轮设计方法、对转涡轮实验台、实验件的设计加工以及对转涡轮的数值模拟方面进行了大量的工作[1~8]。在1 1/2对转涡轮中,一方面由于两转子对转使叶排相对转速大幅增大,约为传统涡轮的两倍;另一方面,高压动叶在结构上与传统的渐缩式流道涡轮叶栅     

A quasi-one-dimensional model for hypersonic reactive flow along the stagnation streamline

This study proposes a quasi-one-dimensional model to predict the chemical non-equilibrium flow along the stagnation streamline of hypersonic flow past a blunt body. The model solves reduced equations along the stagnation streamline and predicts nearly identical results as the numerical solution of the full-field Navier-Stokes equations. The high efficiency of this model makes it useful to investigate the overall quantitative behavior of related physical-chemical phenomena. In this paper two important properties of hypersonic flow, shock stand-off distance and oxygen disso-ciation, are studied using the quasi-one-dimensional model with the ideal dissociating gas model. It is found that the shock stand-off distance is affected by both chemical and thermal non-equilibrium. The shock stand-off distance will increase when the flow conditions are changed from equilibrium to non-equilibrium, because the average density of the shock-compressed gas will decrease as a result of the increase in translational energy. For oxygen dissociation, the maximum value of its dis-sociation degree along the stagnation line varies with the flight altitude. It is increased at first and decreased thereafter with the altitude, which is due to the combination effect of the equilibrium shift and chemical non-equilibrium relaxation. The overall variation of the maximum dissociation is then plotted in the speed and altitude coordinates as a reference for engineering application.     

高速风洞运转特性数值模拟

下吹-抽吸式高速风洞的起动和运转对模型测试有重要影响。为分析试验模型和扩压器对风洞起动和运转特性的影响,采用数值模拟方法,使用二维轴对称模型对Φ0.5m高速风洞的流场进行了研究,控制方程为粘性可压缩Navier-Stokes方程。对马赫数5和10两种状态下的流场行了对比,结果表明,试验段基本流态受试验舱静压控制,收集器对流动状态有很大影响。当带模型运转时,试验段内激波结构更为复杂,出现明显溢流,总压损失更大,所需起动压比越大;扩压器平直段直径决定了其静压恢复效率。扩压器平直段直径增大或安装模型时,临界运转压比都会明显增大;且马赫数越大,受到的影响越大。马赫数5带模型起动时,扩压器平直段直径0.5m,气流壅塞,风洞无法启动。无模型时,当平直段直径0.45m,扩压器不能发挥静压恢复作用,风洞运行时间明显缩短。