Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

含激波的湍流流动高精度大涡数值模拟方法

针对采用亚格子模型进行含激波的湍流流动模拟时会面临激波附近的精度损失问题,考虑从通过亚格子模型以及数值模拟方法两方面的改进来实现湍流流动大涡模拟的精度提高.大涡模拟采用了Yee及Sj(o)green (2009)提出的高阶低耗散方法.该方法采用自适应的流场探测器以控制计算中所需区域的数值耗散,并考虑对动力学模型采用在激波位置使用Sagaut和Germano(2005)提出的单边亚格子过滤器和(或)直接禁用亚格子项等方法加以改进.对于标准的马赫数1.5和3条件下的激波-湍流干扰问题,上述新方法相较于全区域采用亚格子模型的方法均表现出了相似的精度提升.同时实现的数值精度改进方案采用了Harten的亚单元分辨过程来定位和锐化激波,并在精确激波位置附近的网格点处采用了单边测试滤波.     

原子层热电堆热流传感器在激波风洞试验中的应用

高超声速边界层转捩及激波-边界层干扰等基础气动问题的风洞试验中,高频脉动热流是一重要测试量.为了验证自研的原子层热电堆热流传感器在实际风洞试验环境中的性能,利用尖锥模型在Φ2m激波风洞(FD-14A)内开展来流马赫数10、单位雷诺数4.7×106/m等流场条件下的风洞试验,并与高频脉动压力传感器对比,热流测试结果反映出...     

A theoretical method for solving shock relations coupled with chemical equilibrium and its applications

In this study, a theoretical method is proposed to solve shock relations coupled with chemical equilibrium. Not only shock waves in dissociated flows but also detonation waves in combustive mixtures can be solved. The global iterative solving process is specially designed to mimic the physical and chemical process in reactive shock waves to ensure good stability and fast convergence in the proposed method. Within each global step, the single-variable equations of normal and oblique shock relatio...     

Experimental investigation of shock-buffet criteria on a pitching airfoil

An experimental investigation of the shock-buffet phenomenon subject to unsteady pitching supercritical airfoil around its quarter chord has been conducted in a transonic wind tunnel. The model was equipped with pressure taps connected to the fast response pressuretransducers. Measurements were conducted at different free-stream Mach number from 0.61 to0.76. The principle goal of this investigation was to experimentally discuss the shock-buffet criterion over a SC(2)-0410 supercritical pitching ...     

应用傅里叶时间谱方法求解二维跨音速流动问题解的精度研究

为了从时间离散精度的角度评估傅里叶时间谱方法的实际计算效率,对用该方法求解二维跨音速流动问题的解进行了精度研究。通过求解Euler方程模拟俯仰振动NACA0012翼型的周期性非定常流动。结果表明:傅里叶时间谱方法可以使用很大的时间间隔较为准确地模拟有激波存在的周期性跨音速流动;对于此类流动问题,相比二阶向后差分公式法,傅里叶时间谱方法在预测翼型表面压力系数积分量特别是升力系数的时间变化规律方面具有明显的计算效率优势;用于模拟翼型表面压力系数自身的时间变化规律时,傅里叶时间谱方法具有不低于二阶向后差分公式法的计算效率。     

双层壳型涡轮叶片中冲击旋流换热增益效果试验

以双层壳型涡轮叶片内冷通道中旋流换热特性为研究对象,采用热膜法,对双层壳型冷却结构中的狭小受限通道中,旋流作用下换热特性的变化规律开展了细致的试验研究。重点分析了冷却空气的旋流作用对换热的强化增益效果。试验中通过改变冲击Re数(10 000～20 000),冲击间距和冲击孔直径之比H/D(0.35～1.7)等参数,研究了其对旋流的形成及内表面局部换热系数的影响规律。研究发现:由于双层壳型叶片内冷通道的空间受限,冷却空气在通道内形成了旋流结构,该旋流结构显著影响了内表面的局部换热系数并可以有效提高换热效果。研究结果表明:内表面局部换热系数对冲击间距和冲击孔直径之比H/D最为敏感,对于不同冲击Re数,存在一个最佳的H/D使得旋流换热增益效果达到最大(Re=10 000时,最佳H/D为0.95;Re=15 000,20 000,最佳H/D=0.63)。     

基于激波控制的流体推力矢量喷管试验

以二元收扩喷管为对象,开展了基于二次流喷射的流体推力矢量技术研究。基于试验研究,得到了不同喷管落压比、不同的二次流总压比和不同的二次流喷射角度多种工况下的喷管上下壁面中心线压力分布规律以及喷管壁面油流分布图。通过对不同工况下参数变化规律分析,给出了基于二次流喷射的流体推力矢量喷管的主次流气动参数及几何参数对流体推力矢量喷管流场结构和性能影响的关联关系。从试验和分析结果可以看出,喷管落压比、二次流总压比和二次流喷射角度等喷管的主次流气动几何参数对基于流体推力矢量喷管参数变化有明显的影响。     

二元高超声速进气道激波振荡特性实验

通过在进气道/隔离段模型出口附近设置固定的堵塞楔块提高反压,并采用高速纹影拍摄同步壁面压强测量的手段,在马赫数5.9的激波风洞中研究了二元高超声速进气道在不同堵塞度下的流动特征。研究结果表明,在较低的堵塞度下,进气道仍然能够保持起动状态,而在较高的堵塞度下,进气道出现激波振荡。上游产生的压缩波/激波在节流段的反射是出现激波振荡的重要原因之一。随着堵塞度的增加,激波振荡的频率有所升高。