一种可用于微波辐射计热定标源的测温控温系统

介绍测温控温的微波热定标源研究中所用的热定标源的结构及测温控温电路系统     

水分对碳－环氧复合材料Ⅱ型分层韧性的影响

通过研究不同湿热条件下Ｔ３００／９１４Ｃ和Ｔ３００／Ｍ１０两种复合材料的玻璃化转变温度、层间剪切强度和分层断口形貌，分析了水分影响复合材料Ⅱ型分层韧性的机理。结果表明，水分对强界面和弱界面基体体系的作用机理不同，对两类复合材料的分层韧性也有不同的影响。对强界面纤维－基体体系，水分的增塑作用使得其分层韧性增强，而对弱界面体系这种韧性降低。而水分的溶胀作用对两类复合材料的分层韧性都不利。     

直升机着舰起落架动态响应

舰载直升机着舰过程复杂。与地面降落相比,舰面的不稳定气流使得直升机姿态难以保持,下降的速度更大,且由于直升机通常都是单轮着舰,导致起落架载荷很大。为了研究直升机在不同条件下着舰时起落架的动态响应,建立了机体/起落架/舰船耦合模型,将着舰过程中直升机的运动和舰船的运动联系起来,通过仿真计算得出起落架的动态响应。仿真计算结果表明:直升机着舰质量越大,起落架压缩量和载荷越大;直升机低头着舰会导致前起落架载荷显著增大;直升机着舰下沉速度过大会导致着舰载荷急剧增大,可能会对结构造成破坏。     

工艺资源负荷指数的估算方法研究

针对工艺资源的负荷均衡和资源利用情况,研究了工艺资源负荷问题,分析了工艺资源结构,建立了工艺资源信息模型,并给出了基于经验的工艺资源定额估算方法,建立了工艺资源负荷指数模型。算例证实了该模型的有效性。     

基于MPI的大规模变量结构优化技术研究

针对大规模变量结构优化问题,研究了基于虚载荷法的位移敏度求解理论,提出了惩罚函数随优化迭代次数自适应变化的二次扩展内罚函数法,并结合牛顿法作为优化算法.采用MPI并行技术实现了敏度求解的局部并行计算,解决了大规模变量结构优化技术中的规模和效率问题.采用FORTRAN语言在HAJIF2013系统上对上述方法编程实现,实例表明,优化方法能够快速、稳定收敛到最优解,以及基于虚载荷法的位移敏度解析求解理论的高效性和准确性.     

一种负极性直流高压线性电源设计

本文提出了一种基于光耦反馈调整的负极性高压线性电源解决方案，使用NPN型三极管作为功率调整管的前提下，实现了负1200V直流电压输出。本文对提出的电源方案建立了小信号传递函数模型，在传递函数模型的基础上论证了所提出的电源系统具有稳定性高、噪声低等优点。     

Shear flow energy redistribution stipulated by the internal-gravity wavy structures in the dissipative ionosphere

The linear mechanism of generation, intensification and further nonlinear dynamics of internal gravity waves (IGW) in stably stratified dissipative ionosphere with non-uniform zonal wind (shear flow) is studied. In case of the shear flows the operators of linear problem are non-selfadjoint, and the corresponding Eigen functions – nonorthogonal. Thus, canonical – modal approach is of less use studying such motions. Non-modal mathematical analysis becomes more adequate for such problems. On the basis of non-modal approach, the equations of dynamics and the energy transfer of IGW disturbances in the ionosphere with a shear flow is obtained. Exact analytical solutions of the linear as well as the nonlinear dynamic equations of the problem are built. The increment of shear instability of IGW is defined. It is revealed that the transient amplification of IGW disturbances due time does not flow exponentially, but in algebraic – power law manner. The effectiveness of the linear amplification mechanism of IGW at interaction with non-uniform zonal wind is analyzed. It is shown that at initial linear stage of evolution IGW effectively temporarily draws energy from the shear flow significantly increasing (by an order of magnitude) own amplitude and energy. With amplitude growth the nonlinear mechanism turns on and the process ends with self-organization of nonlinear solitary, strongly localized IGW vortex structures (the monopole vortex, the transverse vortex chain or the longitudinal vortex street). Accumulation of these vortices in the ionospheric medium can create the strongly turbulent state.     

Unsteady oscillation of a deformable airfoil section in incompressible flow

The unsteady aerodynamic loads (pressure increment and generalized forces) acting on a deformable thin airfoil section are determined for its arbitrary motion in the incompressible flow with transverse gusts. In this case, the exact Küssner solution in series is used for harmonic oscillation of an airfoil, in which the Theodorsen function is approximated by a sum of fractional functions with poles. In the time domain, these functions are replaced by the unknown functions that satisfy the one-type ordinary first order differential equations. The equations obtained are combined with the differential equations of the airfoil motion in the generalized coordinates and are used for analyzing the aeroelastic system stability and calculating its dynamic response to gust loads.     

某型舵机放大器电老炼模拟负载方案论证

通过对舵机放大器电老炼各类负载进行权衡论证,研究出功率电阻与电感串联的模拟负载。经过方案论证和充分的试验,设计特定的激励信号,对该方案不断地优化和完善,最终基本模拟了电机特性。证明该方案可最大限度地模拟了实际负载电机的工作特性,更适合本单位目前的批生产状态。     

基于最临界约束准则法的机翼主承力结构优化

利用最临界约束准则法对某型飞机机翼主承力结构在强度，位移，扭转角，稳定性和尺寸约束下，以最小重量为目标函数进行了优化，并在实际操作过程中依据机翼结构的复杂性对最临界约束准则法做了相应的修改。结果表明，应用最临界约束准则法进行机翼结构优化时，效率较高，机翼结构重量稳定下降，优化效果明显。