基于压缩感知的单脉冲雷达欺骗干扰机研究

欺骗干扰是一种常用的雷达干扰技术,提出了一种对抗单脉冲雷达的欺骗干扰机设计新方法。在分析欺骗干扰信号特性基础上,基于压缩感知(CS)框架和数字射频存储(DRFM)技术,根据线性调频(LFM)信号在分数阶傅里叶域的能量聚集特性,设计了压缩感知框架下的DRFM以产生角度欺骗干扰信号;通过控制干扰信号强度产生角度拖引和闪烁干扰以实现对单脉冲雷达角度跟踪的有效干扰。仿真实验结果表明,干扰机能够产生良好的角度欺骗干扰信号,通过干扰信号强度控制能够产生稳定的角度拖引和闪烁干扰。     

Trajectory prediction in pipeline form for intercepting hypersonic gliding vehicles based on LSTM

The interception problem of Hypersonic Gliding Vehicles (HGVs) has been an important aspect of missile defense systems. In order to provide interceptors with accurate information of target trajectory, a model based on an improved Long Short-Time Memory (LSTM) network for trajectory prediction pipeline is proposed for the interception of a skip gliding hypersonic target. Firstly, for trajectory prediction required by intercepting guidance laws, the altitude, velocity and velocity direction of the target are formulated in the form of analytic functions, consisting of linear decay terms and amplitude decay sinusoidal terms. Then, the dynamic characteristics of the model parameters are analyzed, and the target trajectory prediction pipeline is proposed with the prediction error considered. Finally, an improved LSTM network is designed to estimate parameters in a dynamically-updated manner, and estimation results are used for the calculation of the final trajectory prediction pipeline. The proposed prediction algorithm provides information on the velocity vector for midcourse guidance with the effect of prediction errors on interception taken into account. Simulation is conducted and the results show the high accuracy of the algorithm in HGVs’ trajectory prediction which is conducive to increasing the interception success rate.     

Improving surface integrity when drilling CFRPs and Ti-6Al-4V using sustainable lubricated liquid carbon dioxide

In the quest for decreasing fuel consumption and resulting gas emissions in the aeronautic sector, lightweight materials such as Carbon Fiber Reinforced Polymers (CFRPs) and Ti-6Al-4V alloys are being used. These materials, with excellent weight-to-strength ratios, are widely used for structural applications in aircraft manufacturing. To date, several studies have been published showing that the use of metalworking fluids (MWFs), special tool geometries, or advanced machining techniques is required to ensure a surface quality that meets aerospace component standards. Conventional MWFs pose a number of environmental and worker health hazards and also degrade the mechanical properties of CFRPs due to water absorption in the composite. Therefore, a transition to more environmentally friendly cooling/lubrication techniques that prevent moisture problems in the composite is needed. This research shows that lubricated LCO₂ is a viable option to improve the quality of drilled CFRP and titanium aerospace components compared to dry machining, while maintaining clean work areas. The results show that the best combination of tool geometry and cooling conditions for machining both materials is drilling with Brad point drills and lubricated LCO₂. Drilling under these conditions resulted in a 90 % improvement in fiber pull-out volume compared to dry machined CFRP holes. In addition, a 33 % reduction in burr height and a 15 % improvement in surface roughness were observed compared to dry drilling of titanium.     

基于形状记忆聚合物复合材料的双向形状记忆行为

为了解决当前大多形状记忆聚合物仅能实现单向形状记忆效应的难题，将TDE-86环氧树脂改性的氢化双酚A型形状记忆环氧树脂和以聚丁二烯为软段的聚氨酯弹性体相结合，制备了一种具备层合结构的形状记忆聚合物复合材料。该复合材料通过形状记忆环氧树脂产生的回复力与预拉伸聚氨酯弹性体产生的收缩力之间的平衡从而实现无应力下的双向形状记忆行为，即在90～110℃温度范围内，加热弯曲而冷却反向弯曲。结果表明：聚氨酯弹性体预拉伸量越大，材料在整个温度范围内的弯曲程度也越大；当回复温度在形状记忆环氧树脂玻璃化温度及以上时，材料回复程度较大；增加聚氨酯弹性体厚度会增大材料初始的弯曲程度，但会减小材料在双向形状记忆过程中的变形和回复程度。     

Improving tensile-shear properties of friction stir lap welded dissimilar Al/Mg joints by eliminating hook defect and controlling interfacial reaction

To improve tensile-shear properties of fiction stir lap welded(FSLW) dissimilar Al/Mg joints, pin-tip profiles were innovatively designed and welding speed was optimized, and effects of them on formation, interface microstructure and mechanical properties of different FSLW joints were investigated. With increasing the welding speed, the tensile-shear load of FSLW joints produced by three pins presents an increasing firstly and then decreasing trend. Compared with Rpin, the hook and hole defect i...     

一种瞬时大带宽DRFM系统的信道化设计

为实现宽带雷达回波信号的模拟生成,通常采用基于信道化技术的射频存储(DRFM)系统。在信道化DRFM系统中,不合理的信道划分方案和多相滤波器设计会导致频谱混叠、频谱分量缺失和幅度失真。文章提出了一种相邻信道频谱有50%交叠的信道划分方法,并对信道化滤波器组进行了优化设计。在此基础上,给出了一种瞬时大带宽DRFM系统的实现方案。仿真结果表明,文章提出的设计方案可以实现Nyquist采样带宽内雷达信号的射频存储和模拟转发,且具有较小的幅度失真,可以满足瞬时大带宽雷达回波信号的模拟需求。     

短切碳纤维增强环氧树脂形状记忆复合材料的制备与性能研究

为实现形状驱动能耗与复合材料力学性能的最佳配合，本文在热致环氧形状记忆聚合物基体中提高增韧剂新戊二醇二缩水醚（NGDE）含量来降低其玻璃化转变温度，同时添加短切碳纤维（SCF）来抵消由增韧剂引起的刚度降低负面效果。通过实验研究了不同NGDE、SCF含量对复合材料形状记忆转变温度、形状记忆性能和力学性能的影响。结果表明，增加NGDE含量可将环氧聚合物基体的形状记忆转变温度从90 ℃降至43 ℃，其储能模量和弯曲模量也随之降低。在11wt%NGDE上添加SCF后，复合材料的玻璃态储能模量、橡胶态储能模量、弯曲模量最高可提高至原始试样的1.9倍、7倍和2.4倍。     

航空数据存储卡毁钥能力评价方法研究

为满足复杂战场态势下机载数据的安全性需求，需要建立对航空数据存储卡毁钥能力有效评价的方法。 建立航空数据存储卡毁钥能力有效性评价的目的是保证航空装备信息安全的重要措施，是科学、准确评价毁钥 设计是否满足需求的重要手段，是航空装备定型列装前必要的信息安全测评过程。通过对航空数据存储卡的典 型结构和硬件毁钥原理进行分析，对毁钥后电学、物理和化学等技术手段进行深入的研究，提出一种针对航空 数据存储卡毁钥能力的评价方法，从数据存储卡读取能力和存储介质损毁状态两个过程对毁钥效果开展评价， 从而规范了当前测评机构对数据存储卡毁钥能力评价过程中无统一方法的现状。本文利用该评价方法对某样品 航空数据存储卡经硬件毁钥试验后开展毁钥效果分析，验证方法的有效性。航空数据存储卡毁钥能力评价方法 可以很好的评估毁钥设计的效果，确保机载数据的安全。     

航天器大尺度部件折叠展开原理分析及应用

围绕航天器向大尺度、远距离发展所涉及的大尺度部件在轨展开技术中新工艺、新材料、新结构等，对现有航天器大尺度部件的折展机构进行了统计与分析，系统梳理了在轨航天器折展机构的技术参数、结构与组成等。介绍了折纸艺术、自回弹材料与记忆合金等新工艺、新材料在航天器太阳帆板、天线等大尺度部件上的应用。重点分析并梳理了新型结构的特性及其工作原理，包括：充气展开式、单轴旋转式、径向扩展式、单元重构式、延长伸展式等。最后，结合即将开展的载人登月与月球基地建设、太阳系探测等深空探测任务，对在轨航天器大尺度部件的折展结构与机构的发展趋势进行了展望。     

碳纤维特性对C/ C 复合材料界面性能的影响

分别采用扫描电镜、比表面积与孔体积分析仪等手段对日丝(RS-Cf ) 和美丝(MS-Cf ) 两种碳纤 维进行表面状态表征分析,通过纤维顶出试验、冲剪强度和弯曲强度对两种纤维制备的C/ C 复合材料界面性 能进行了微观和宏观测试,研究了不同表观结构纤维对C/ C 复合材料界面性能的影响。纤维表面形貌观察结 果表明:圆形RS-Cf 表面沟槽比腰果形MS-Cf 明显,但沟槽数量少于MS-Cf,而MS-Cf 的比表面积、孔体积和 孔径均大于RS-Cf。RS-C/ C、MS-C/ C 复合材料界面强度分别为2. 98 和3. 80 MPa;RS-C/ C 复合材料的弯曲 和冲剪强度分别为55. 9 和32. 0 MPa,低于MS-C/ C 复合材料的65． 0 和35. 2 MPa,微观和宏观力学性能均表 明MS-C/ C 复合材料的界面强度高于RS-C/ C 复合材料。