1420 铝锂合金同种异种自冲铆单搭接头力学性能

为探究1420铝锂合金自冲铆接头的力学性能,本文采用自冲铆连接设备对1420铝锂合金(AL1420)同种及其与铜合金(H62)异种板材组合进行铆接,并通过拉伸-剪切试验测试接头的力学性能,运用SPSS数据分析软件对接头的最大载荷和最大位移量进行分析。结果表明:AL1420-AL1420和AL1420-H62两种接头的失效形式皆为铆钉从下板拉脱,铆钉头与上板接触区域出现不同程度撕裂;H62-AL1420接头除铆钉从下板拉脱,铆钉头与下板接触区域仅出现凹陷。AL1420-AL1420接头最大载荷最高(6 026.8 N),能量吸收性能最好(16.84 J)。对于异种板材组合,H62-AL1420接头的最大载荷(5 304.0 N)大于AL1420-H62接头(5 229.3 N),AL1420-H62接头的能量吸收值(16.79 J)大于H62-AL1420接头(15.08 J),异种板材铆接时则优先采用能量吸收性能较好的AL1420-H62搭接形式。     

基于3DES算法的SRAM工艺FPGA加密设计

本文提出了一种基于3DES算法的SRAM工艺FPGA加密设计方法,并详细描述了3DES加密算法的模型以及其硬件设计过程,最后给出3DES加密算法的硬件实现仿真时序图以及在FPGA中的实现结果.     

Low-temperature Formation of Aluminide Coatings on Ni-base Superalloys by Pack Cementation Process

This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a two-layer structure. The top layer mainly consists of Al₃Ni₂ and Al₃Ni, while the bottom layer of Al₃Ni₂. Great efforts are made to elucidate the effects of different experimental parameters on the microstructure and the constituent distribution of the coatings. The results show that all the parameters exclusive of the pack activator (NH₄Cl) content produce effect on the coating thickness, but do not on the microstructure and the constituent distribution. The pack activator (NH₄Cl) content affects neither the coating thickness nor structure and constituent distribution. The parabolic relationship between the coating thickness and the deposition time suggests that the process is diffusion-controlled. Furthermore, the article demonstrates a linear relationship between the coating thickness and the reciprocal deposition temperature.     

Spatial Influence of Environmental Axes in a Baseball Field

Abstract

We investigated the influence of environmental axes in a baseball field. In Experiment 1, participants walked either a path in the prototypical orientation (home plate to second base) or one which was rotated 225°. Recall for object locations was best when participants imagined themselves aligned with axes salient from the experienced orientation. In Experiment 2, when learning was through a route text, there was less of an influence of environmental axes. In Experiment 3, when participants walked both paths, memories were good for the atypical orientation, suggesting that task-specific spatial cues can be more influential than a prior conceptual north.     

Individual Differences in Representational Precision Predict Spatial Working Memory Span

Perhaps the signature feature of working memory is that it is limited. In the same subjects, we used two different retrieval tasks to independently measure two different limits of spatial memory. Precision was measured by asking participants to localize a missing target item among a field of other targets and distracters. Capacity was measured with a similar task where participants identified, rather than localized, a set of remembered targets from within a larger set of identical items. Across participants, the precision of localization was positively correlated with the number of successfully retrieved items. These data suggest that an individual's representational capacity may ultimately be constrained by their ability to form precise representations of space.     

雷达射频掩护信号分析及对抗方法研究

为提高抗干扰能力,雷达采用射频掩护信号对抗有源干扰机.分析射频掩护信号的产生机理和工作波形,以及射频掩护信号对雷达有源干扰机中测频接收机、信号处理机、数字射频存储器及脉冲行波管发射机的影响,从而给出雷达有源干扰机对抗射频掩护信号的方法.     

时效对亚共析CuAlBe形状记忆合金的影响

通过对200-400℃范围内时效试样进行相变点测量和OM,SEM,XRD分析,对亚共析成分的CuAlBe形状记忆合金的热稳定性进行了系统研究。结果表明:在200-300℃温度范围短时间时效,合金的相变温度由于有序化过程的进一步进行而上升;在200-300℃温度范围长时间时效或300％以上温度时效,合金的相变温度明显下降,其原因是平衡相α和非平衡相α在合金中析出。     

Mg-Zn-Zr-RE系镁合金的显微组织

 应用于航空工业中的MB15镁合金（Mg,5.0～6.0％Zn,0.5～0.9％Zr）为高强度变形镁合金。为进一步提高此合金的强度而添加稀土元素。本文报导含有Y及混合稀土的Mg-Zn-Zr-RE系合金的相组成及其微观形态的研究结果。 试验用合金的化学成分列于表1。表中MM为混合稀土,其中主要元素La10.76％,Nd17.54％,Gd14.60％,Dy14.09％,Y26.88％,此外还有少量Ce、Pr、Ho、Er等。试样用材为铸锭及挤压型材,后者是铸锭经350℃加热2h后挤压而成。