基于等几何分析的板壳结构形状-拓扑协同优化

板壳结构轻量化设计是工程中的常见问题,采用有限元法对板壳结构进行拓扑优化时,难以获得高质量的网格以精准描述几何模型,且单独使用拓扑优化受制于初始设计空间。提出了一种基于等几何分析的形状-拓扑协同优化方法,该方法执行先形状优化、后拓扑优化的步骤,在最佳结构形状的基础上实现最佳材料布局的优化目标。相比于其他组合形式的优化机制,极大地提高了计算精度与计算效率。采用3个数值算例验证了本方法的有效性与高效性,结果表明,与经典等几何拓扑优化方法相比,可得到更高性能的优化结构,有助于进一步拓宽结构优化的应用范围。     

A fuzzy PID-controlled SMA actuator for a two-DOF joint

Shape memory alloy(SMA) actuator is a potential advanced component for servosystems of aerospace vehicles and aircraft. This paper presents a joint with two degrees of freedom(DOF) and a mobility range close to ±60 when driven by SMA triple wires. The fuzzy proportional-integral-derivative(PID)-controlled actuator drive was designed using antagonistic SMA triple wires, and the resistance feedback signal made a closed loop. Experiments showed that, with the driving responding frequency increasing, the overstress became harder to be avoided at the position under the maximum friction force. Furthermore, the hysteresis gap between the heating and cooling paths of the strain-to-resistance curve expanded under this condition. A fuzzy logic control was considered as a solution, and the curves of the wires were then modeled by fitting polynomials so that the measured resistance was used directly to determine the control signal. Accurate control was demonstrated through the step response, and the experimental results showed that under the fuzzy PID-control program, the mean absolute error(MAE) of the rotation angle was about 3.147. In addition, the investigation of the external interference to the system proved the controllable maximum output.     

非晶态NiB合金催化剂的改性研究

本文采用自制连续微反装置，以气相乙炔加氢为探针反应，考察了以化学还原法制备的非晶态NiB、NiBSm合金催化剂和以化学还原与浸渍法相结合制备的负载型催化剂NiB/Al2O3的加氢活性及稳定性。用XRD和ICP鉴定结构与分析组成，用DSC和TC测定催化剂的热稳定性和抗积炭能力，用TPR、TPD表征催化剂的表面性质。结果表明，经改性后的非晶态NiB合金催化剂的活性和热稳定性增强。     

引用形定义与图像控件菜单交互标注形位公差

实现形位公差交互标注的方法有多种,但基本上都是用ＡｕｔｏＬＩＳＰ语言和菜单文件结合编程实现的,本文介绍的方法是在ＡｕｔｏＣＡＤ１４．０中,用引形定义与图像控件菜单交互标注形位公差。     

激光制导武器光斑形状半实物仿真技术研究

在激光制导武器半实物仿真试验中，其中一个要求就是激光目标模拟器为导引头提供的光斑形状应与其在实战环境下“看到”的一致。根据激光制导武器制导原理，建立了实战条件下激光光斑形状模型，并设计了光斑形状半实物仿真系统。依据仿真相似性原理，建立了仿真条件下的光斑形状数学模型及激光目标模拟器发射的激光束散角数学模型，讨论了照射误差对光斑形状的影响。通过仿真分析证明这些模型是正确的。     

A hybrid chemical modification strategy for monocrystalline silicon micro-grinding: Experimental investigation and synergistic mechanism

For high performance manufacturing of micro parts and features, a hybrid chemical modification strategy is proposed to decrease critical energy barrier of mechanical removal of hard and brittle crystal material by refining localized machining condition. The strategy, namely UV-light and IR-laser hybrid chemical modification (UVIR-CM) strategy, includes two steps, an ultraviolet light (UV-light) catalytic advanced oxidation and an infrared laser (IR-laser) assisted selective modification based on Fenton liquid–solid reaction for monocrystalline silicon. The modification effects of UVIR-CM strategy were investigated by surface morphology micro-observation, cross-section transmission electron microscopy (TEM) observation, Raman spectroscopy analysis and nanoindentation test. Experimental results demonstrated that varied degrees of laser texturing appeared on different strategy samples’ IR-laser scanned area. And the IR-laser thermal damage has been successfully inhibited due to the refraction and reflection of energy by bubbles in liquid medium. But for the UVIR-CM strategy, a uniform and amorphous silicate layer is detected in a certain boundary. The UV-light promotes oxidation cycle ability of the chemical solution and ensures sufficient oxide modified layer for subsequent step. Attributing to synergism of photochemical, photothermal and kinetic effects induced by IR-laser, the modified layer displays layered structure with about 600 nm thickness, (2.7 ± 0.60) GPa nanohardness, and (93.7 ± 22.9) GPa indentation modulus. And the layered structure is amorphous layer, nanocrystal and micro-twins layer from the surface to the interior of sample. Consequently, it reveals that the subsequent mechanical removal will become easy due to decreasing energy barrier of monocrystalline silicon in selective area. Meanwhile, its original excellent mechanical properties also are maintained under a certain depth. The results contribute to develop a novel combined micro-machining technology to achieve collaborative manufacturing of structure shape and surface integrity for micro parts and feature.     

基于远场模式的散射体形状成像

对线性抽样法的电磁场逆散射求解进行了研究。为避免迭代和优化法的正问题求解,用积分算子将散射物边界数据映射到散射场的远场模式,针对第一类积分方程的不适定性,用Tikhonov正则化法求解,并用高阶收敛算法确定正则化参数以快速数值实现。数值计算结果表明：线性抽样法＋确定正则化参数的高阶收敛算法可较好地滤除噪声,减少了确定正则化参数的计算量。     

Large Amplitude Flexural Vibration of the Orthotropic Composite Plate Embedded with Shape Memory Alloy Fibers

研究了形状记忆合金(SMA)纤维混杂复合材料大挠度层合板的非线性自由与受迫振动特性。基于描述SMA力学行为的Brinson理论以及层合板材料性能预测的混合率,建立了SMA纤维混杂复合材料大挠度层合板的本构方程,基于对称层合各向异性弹性板的非线性理论,建立了以横向挠度和应力函数表示的板的横向振动方程和相容方程。采用Galerkin近似解法将振动方程化为时间变量的含有3次非线性项的Duffing型常微分方程,采用谐波平衡法(HBM)获得系统的固有频率方程和强迫振动稳态频率响应方程。数值计算表明,非线性板自由振动频率比与激励温度的关系具有与线性板相同的特征,马氏体相向奥氏体相转变阶段温度对板的振动频响特性曲线的影响最显著,同时也讨论了SMA纤维含量、板的纵横比以及自由振动幅值对板的非线性频率比的影响。     

叶尖间隙智能气动密封技术研究

利用形状记忆合金的特性发展了一种新型压气机叶尖间隙智能密封技术,可以根据发动机工作状态的变化,自适应地控制压气机叶尖间隙。本文介绍了控制叶尖间隙的原理和方案,进行了智能气动密封环的结构设计,并对密封环进行了变形计算与分析。      

短切碳纤维增强环氧树脂形状记忆复合材料的制备与性能研究

为实现形状驱动能耗与复合材料力学性能的最佳配合,本文在热致环氧形状记忆聚合物基体中提高增韧剂新戊二醇二缩水醚（NGDE）含量来降低其玻璃化转变温度,同时添加短切碳纤维（SCF）来抵消由增韧剂引起的刚度降低负面效果。通过实验研究了不同NGDE、SCF含量对复合材料形状记忆转变温度、形状记忆性能和力学性能的影响。结果表明,增加NGDE含量可将环氧聚合物基体的形状记忆转变温度从90 ℃降至43 ℃,其储能模量和弯曲模量也随之降低。在11wt%NGDE上添加SCF后,复合材料的玻璃态储能模量、橡胶态储能模量、弯曲模量最高可提高至原始试样的1.9倍、7倍和2.4倍。