全球卫星导航星座网络协议体系与运行模式

针对全球卫星导航星座网络建设初期或论证阶段所涉及的网络体系结构、协议体系及相关组网等技术问题,开展了基于导航星座星间链路构建空间信息网络的技术研究,分别提出了由子网、接入网、骨干网等节点及其相互之间星间、星地无线链路构成的分层网络系统结构,设计了兼容遥控、遥测、测量与网络交互支持等业务的基于IP over CCSDS(基于空间数据系统咨询委员会标准的空间链路承载互联网协议业务)的协议体系,给出了全系统基本通信业务运行模式等。与传统高轨卫星通信系统相比,该星座网络具有高覆盖、低时延、随遇接入等优点,可实现星座导航性能与中低轨及地面用户通信性能的全方位提升,相关结果对我国全球卫星导航星座网络技术研究具有一定的参考意义。     

中国特殊经济区和海关特殊监管区的发展方向

只要符合透明度原则和非歧视原则 ,继续保留对特殊经济区的优惠政策 ,就不违背中国加入世界贸易组织《议定书》和《报告书》的有关规定 ,但应该由“地区倾斜”转向“产业倾斜” ;对保税区和出口加工区等海关特殊监管区的管理最终应该体现“境内关外”的特征 ,与国际通行规则保持一致。     

导弹撞地概率对参数选择的影响

研究了巡航导弹的撞地概率和系统参数选择的关系问题。首先在考虑了地形随机输入和低空风随机干扰共同作用的情况下，推导了撞地概率的计算方法。其次以导弹主要参数（ａ２４和Ｋｈ）的选择为例，在给定条件下求出了它们和撞地概率的关系曲线，并分析了它们对撞地概率的影响。研究结果表明，协调选择ａ２４和Ｋｈ等参数，能有效降低撞地概率，提高巡航导弹的作战效能。     

一种飞船返回舱落点选优算法的设计与实现

设计一种选优算法。算法依据概率论,以寻找落点最密集区域为思路,从已知众多飞船返回舱落点数据中计算产生一个“优秀”落点,即尽可能接近返回舱的实际着陆点。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

含多裂纹连接结构损伤容限试验研究

 针对机翼典型对接结构,进行了平板空孔试样和螺栓搭接件在等幅谱及飞－续－飞谱下的多裂纹损伤容限试验,通过该试验开展多裂纹开裂模式及多裂纹扩展规律的试验研究,为多裂纹断裂力学理论分析、多裂纹结构剩余强度准则提供试验依据。     

不饱和聚酯树脂与双马来酰亚胺的共聚改性

利用双马来酰亚胺(BMI)作为共聚单体与不饱和聚酯(UP)树脂进行共聚反应,使其玻璃化转变温度、弹性储能模量、拉伸和弯曲性能都有大幅度的提高,尤其是70?℃下力学性能有明显改观.利用红外光谱法测定了上述共聚树脂体系中不饱和聚酯、苯乙烯、双马来酰亚胺各自双键的聚合反应程度,分别为70.83%,95.46%和97.69%.实验结果表明由于BMI的参与,大大提高了UP树脂的固化反应活性.试样的断口形貌表明上述共聚树脂呈均相组织结构.     

S-08钢真空熔模精密铸造工艺研究

通过工艺试验和系统分析,研究出一套用真空感应铸造炉生产S-08钢铸件的工艺方法,解决S—08钢真空熔模精密铸造过程中的关键工艺技术问题,使S-08钢铸造的液氧／煤油发动机低压壳体、氧主阀下壳体等关键铸件满足高压、高冲击的负荷指标。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

Structural and collisional data for Mg III and Al IV

We present in this work energy levels, oscillator strengths, radiative decay rates and fine structure collision strengths for the Mg III and Al IV ions. The 11 configurations: (1s²) 2s²2p⁶, 2s²2p⁵3l, 2s2p⁶3l, 2s²2p⁵4l   (l?n-1$l?n-1$, where n is the principal quantum number), yielding the lowest 75 levels are used. The collisional data for these two ions are missing in the literature, especially the database CHIANTI, this is the principal motivation behind the present work. Calculations have been performed using the AUTOSTRUCTURE code. AUTOSTRUCTURE treats the scattering problem in the distorted wave approach. Fine structure collision strengths are calculated for a range of electron energies from 10 Ry to 240 Ry. The atomic structure data are compared to available experimental and theoretical results.