空间激光通信系统光斑小目标跟踪算法研究

在空间激光通信链路中,大气湍流、结构设计误差、平台扰动等因素为链路的精确对准和精密跟踪带来了困难。为提高激光链路的跟踪精度,首先对光斑跟踪过程中的影响因素进行研究分析,继而对跟踪算法做出改进。针对跟踪目标特性,设计了一种自适应模板目标相关跟踪算法,并搭建了基于粗精复合轴跟踪系统的实验平台,开展了实验验证。结果表明：与当前常用跟踪算法相比,该设计处理速度可达 1 kfps,目标跟踪位置与真实位置基本重合,目标跟踪准确率高于98%,在处理速度、跟踪准确率与算法鲁棒性上均有较大提升,具有一定的实用性。     

直升机主起落架疲劳试验技术研究

以直升机主起落架疲劳试验为对象，对试验内容、试验方法、试验实施及试验结果进行分析。通过试验验证确定了起落架的疲劳危险区域，并为优化零件结构提供了依据。     

舰载机智能复飞决策技术研究

为了进一步改进复飞技术,针对复飞环境,提出了一种在原军用推力操纵的基础上,加入具有保持迎角恒定的升降舵模糊控制的复飞系统,从而有效地增强了低动压状态下飞机的机动能力。给出了复飞决策准则,设计了基于模糊控制的复飞决策系统,并对具有该复飞决策系统的舰载机自动着舰导引系统进行了仿真验证。结果表明,该复飞决策系统明显地缩小了复飞边界区,大大提高了着舰和复飞的安全性,可实现自动复飞,减轻了飞行员的负担。     

航空发动机热端部件可修复性评估方法探讨

评估热端部件的可修复性是开展受损航空发动机热端部件修复工作的重要内容之一。本文综合介绍了热端部件可修复性的定义、技术上的可修复性及可修复性评估的工艺流程等。重点论述了不同因素对可修复性评估的影响,并指出:热端部件的可修复性评估应在现有技术基础上,针对部件结构和使用特点,综合分析部件缺陷位置载荷要求、焊接修复区组织性能和结构可达性、工艺匹配性等特殊制约因素对热端部件可修复性的影响,在此基础上实现受损热端部件可修复性的合理准确评估。     

关于进行程序管制一体化模拟练习的设想

在程序管制模拟练习中，存在着塔台管制服务、进近管制服务和区域管制服务互不衔接，不能系统地模拟整个管制过程的问题。针对这一情况提出了程序管制一体化模拟练习和程序和管制一体化模拟机的结构设计。     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

ATM局域网仿真技术

简要介绍了 Ａ Ｔ Ｍ 局域网仿真的主要原理，以 Ｉ Ｂ Ｍ ８２６０ Ａ Ｔ Ｍ 交换机为例，具体分析了 Ａ Ｔ Ｍ 局域网仿真的实现细节。     

线性调频半导体激光衍射光栅干涉仪

介绍一种以线性调频半导体激光为光源的衍射光栅干涉仪。激光与光栅上衍射的±１级衍射波会合，由于有光程差而发生光拍频，测量拍频信号的相位移则可测得光栅的位移。设计了一种克服激光波长漂移和空气折射率变化影响的对称差动光路，使这种方法达到实用化的程度，分辨力达到纳米级。此外，还介绍了应用于接触干涉仪的实验情况。     

Route generation and description using the notions of object's influence area and spatial conceptual map

In the GRAAD Project we aimed at creatinga system which could generate route directions thatare comparable to route directions created by humanparticipants. With this goal in mind, we started froma linguistic and cognitive study of route directionsproduced by people and the study of cognitive modelsof mental maps. We proposed a new qualitative spatialmodel that can support the spatial properties of humanroute directions. This model is based on the notion ofobject's influence area which is used to modelneighborhood, orientation and distance. The proposedapproach relies on the manipulation of spatialentities in a spatial conceptual map (SCM) which isthe computarized analog of a mental map used bypeople. We developped the GRAAD System, software thatgenerates routes in a SCM and describes them innatural language. Finally, we conducted an experimentin order to compare GRAAD's route directions androutes described by human participants in similarexperimental conditions. GRAAD's output was notdistinguishable from route directions created by humanparticipants. In this paper we present the mainresults obtained during all phases of the GRAADProject.     

Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness

This article presents the microstructure and hardness variation of an Al–8.5Fe–1.3V–1.7Si(wt%, FVS0812) alloy after selective laser melting(SLM) modification. Three zones were distinguished across the melting pool of the SLM-processed FVS0812 alloy: the laser melted zone(LMZ), the melting pool border, and the heat affected zone(HAZ) in the previously deposited area around the melting pool. Inside the LMZ, either an extremely fine cellular-dendritic structure or a mixture zone of the a-Al matrix and nanoscale Al_(12)(Fe,V)_3Si particles appeared. With a decreased laser beam scanning speed, the cellular-dendritic structure zone within the LMZ shrank significantly while the mixture zone expanded. The a-Al and Al_(12)(Fe,V)_3Si mixture zone was also observed in the HAZ, but another phase, submicron h-Al_(13)Fe_4 particles with rectangular or hexagonal shapes,formed along the melting pool border. Microhardness tests indicated that the hardness of the SLM-processed FVS0812 samples far exceeded that of the as-cast FVS0812 alloy.