月球精确软着陆最优标称轨迹在轨制导方法

为实现在月球表面期望的着陆点进行精确软着陆（PPL）,且满足燃耗最优性要求,基于提出的LIDAR目标点在轨自主选定的月球精确软着陆方案,对月球PPL最优标称轨迹在轨快速规划制导方法进行研究。首先针对月球PPL三维球体非线性轨道动力学模型,采用Legendre Gauss Lobatto伪光谱方法将轨迹优化的最优控制问题转化为非线性规划问题（NLP）,再利用SQP优化算法求解月球PPL最优标称轨迹,最后通过遗传算法对优化结果进行验证,并提出应用遗传算法提供SQP在轨规划初值数据库的方案。仿真结果表明了最优标称轨迹在轨规划方法的快速性和有效性。     

基于预计算和周期性的ECC标量乘法算法

在研究二进制、带符号的二进制(NAF,Non-Adjacent Form)等常见标量乘法算法的基础上,结合椭圆曲线基点的周期特性和预计算倍点序列方式,提出了一种新的标量乘法算法,并给出了新算法的详细步骤.点的周期性和系数决定了直接进行标量乘法运算还是转化为求其逆元,预计算倍点序列方式避免了椭圆曲线密码体制(ECC,Elliptic Curve Cryptosystem)加解密过程中大量的重复运算.为验证算法的正确性,采用密钥长度为192 bit椭圆曲线,给出了一个具体实例.实例结果和算法分析表明:与二进制和NAF算法相比,新算法虽占用了一些存储空间,但省去了倍点运算的时间开销,同时减少了点加的运算次数,极大地提高了标量乘法运算的效率.该算法的提出对完善ECC理论和加快ECC在实际中的应用具有重要意义.      

响应面法优化牡蛎复合酶水解工艺研究

采用响应面法优化牡蛎的复合酶水解工艺.结果表明：中性蛋白酶与风味蛋白酶按照2∶1复配,在水解温度40℃,水解时间5.68h,水解pH值7.0条件下,牡蛎蛋白水解度可达到32.24%,水解效果最优.验证试验表明,实际蛋白质的水解度与模型预测值相近,因此采用响应面法优化牡蛎酶解工艺,准确可靠.     

Capability for ozone high-precision retrieval on JEM/SMILES observation

We estimate the capability of ozone (O₃) retrieval with the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) instrument attached to the Exposed Facility of the Japanese Experiment Module (JEM) on the International Space Station (ISS). SMILES carries a 4-K mechanical refrigerator to cool superconducting devices in space. Since SMILES has high sensitivity thanks to the superconducting receiver, it is expected that SMILES has ability to retrieve O₃ profiles more precisely than the previous millimeter–submillimeter limb measurements from satellites.     

轴向间距对转子叶片颤振特性的影响机理

使用自行开发的非定常流固耦合数值模拟程序,研究了上游叶排影响转子叶片颤振特性的机理,采用影响系数法分析轴向间距影响转子气动弹性稳定性的规律。结果表明:在协调叶栅中,叶片吸力面相邻的叶片振动对转子叶片气动阻尼的大小起决定性作用,其影响甚至超过振动叶片本身的影响;多排环境中,导叶（IGV）对转子叶片气动阻尼最小值的影响最大,并使其对应的节径增大;相邻叶片振动引起的通道变化抑制了导叶对非定常压力波的反射作用;随着轴向间距的减小,导叶对非定常压力波的反射作用减弱了非定常压力波的周向衰减,从而增大了叶片振动的非定常影响范围;在多排环境中使用影响系数法需要测量更多的叶片才能得到较为准确的气动阻尼。      

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

非均质壁面对液滴俘获能力的数值模拟研究

为研究不同非均质壁面对液滴的俘获能力,采用界面追踪法（FTM）结合广义滑移边界建立了接触角模型,对液滴在非均匀润湿的非均质壁面上的运动过程进行了数值模拟研究。液滴在倾斜壁面上受到重力作用由均匀润湿部分下滑至非均匀润湿部分,通过改变Bo数、Oh数、非均匀润湿程度研究了液滴在非均匀润湿区域的运动规律。研究表明:Bo数越大,液滴运动受壁面阻力影响越小,液滴下滑的速度越快,液滴越难以被俘获;Oh数越大,液滴运动受壁面阻力影响越小,液滴越难以被俘获;非均匀润湿程度越大,非均质壁面对液滴的阻力越大,液滴越易被俘获。