航空结构件铣削变形及其控制研究进展

随着机床加工性能和刀具切削性能的提升,航空结构件的高效高精加工成为可能.航空结构件薄壁加工特征多,在铣削过程中易发生变形,因此预测与控制航空结构件的加工变形是切削加工领域内亟待解决的难题.通过总结了航空结构件的特点及加工难点,对加工变形形成机理进行深入分析;对加工变形影响最为关键的铣削力模型进行归纳;阐述了航空结构件残...     

北斗三号系统卫星自主完好性监测技术

完好性对于全球卫星导航系统(GNSS)来说至关重要,关乎到其能否被放心应用。卫星自主完好性监测(SAIM)技术,是完好性监测技术发展的前沿趋势,国内外卫星导航系统均竞相发展。介绍了北斗三号系统SAIM技术设计与实现的重要意义,从功能设计和实现原理两个方面,阐述了北斗三号SAIM技术体制。针对SAIM实际在轨监测数据的正态分布特性服从程度和长期稳定性等问题,随机选取某一颗中圆轨道(MEO)卫星自2020年7月31日北斗三号系统正式开通服务以来至2021年7月31日连续1年期间的监测数据,得到真实在轨监测数据的分布特性。最后,提出了告警门限优化、分级告警策略设计、星历完好性自主监测等方面的后续发展必要性建议,旨在为北斗系统更好地为全球用户提供更优质的完好性服务提供参考。     

面向高轨空间的北斗导航性能增强星座选型研究

由于高轨空间超出北斗卫星导航系统的正常服务区域,导航信号微弱、可见性差,难以实现高轨飞行器全程稳定可靠的导航定位服务。提出了以空间卫星为时空基准传递平台,向高轨空间区域发射导航信号,从而提高高轨飞行器导航性能的方法,并展开面向高轨空间的北斗导航性能增强星座选型研究。基于卫星可见性、精度衰减因子（DOP）、信号接收门限和所需增强卫星数目等评估指标,仿真分析了基于LEO星座、MEO星座和HEO星座的北斗导航增强性能。     

Dayside ionospheric uplift during strong geomagnetic storms as detected by the CHAMP,SAC-C,TOPEX and Jason-1 satellites

Ionosphere response to severe geomagnetic storms that occurred in 2001–2003 was analyzed using data of global ionosphere maps (GIM), altimeter data from the Jason-1 and TOPEX satellites, and data of GPS receivers on-board CHAMP and SAC-C satellites. This allowed us to study in detail ionosphere redistribution due to geomagnetic storms, dayside ionospheric uplift and overall dayside TEC increase. It is shown that after the interplanetary magnetic field turns southward and intensifies, the crests of the equatorial ionization anomaly (EIA) travel poleward and the TEC value within the EIA area increases significantly (up to ∼50%). GPS data from the SAC-C satellite show that during the main phase of geomagnetic storms TEC values above the altitude of 715 km are 2–3 times higher than during undisturbed conditions. These effects of dayside ionospheric uplift occur owing to the “super-fountain effect” and last few hours while the enhanced interplanetary electric field impinged on the magnetopause.     

卫星数传调度问题的速度可控粒子群优化算法

针对卫星数传调度这一类复杂的约束组合优化问题,提出了一种速度方向和尺度可控的粒子群优化求解算法。为克服粒子群算法的早熟问题,该算法引入了速度更新的方向控制规则和尺度控制规则用于增加群体的多样性,并根据两种控制规则,提出了种群粒子的速度迭代策略,实现了算法运行过程中粒子间吸引和排斥过程的动态调整,同时保证了算法的收敛速度。设计了卫星数传调度问题的编码和解码方式,并证明了该编码方式下最优可行解的存在性。通过仿真实例验证了算法的有效性,并分析了算法控制参数对优化结果的影响。     

用Nocilla模型计算卫星气动力系数和热流密度分布

本文用Nocilla粒子-表面作用模型计算卫星在运行轨道中整体气动力系数和星体表面热流密度分布,文中列出了详细计算公式和一个算例。     

集主承力结构与大容量储箱支架于一体的卫星主承力筒结构研究

针对现代卫星结构的大型化、燃料储箱的大型化,提出了一种集主承力结构与大容量储箱支架一体化的卫星主承力筒结构形式,旨在降低卫星质心、提高基频;在满足储箱容积的前提下,又能满足主结构有效载荷往运载的力的传递作用．有限元数值计算表明,该结构形式能够满足卫星相关结构性能的要求,可以作为今后卫星结构设计的参考构型．     

Satellite proximate interception vector guidance based on differential games

This paper studies the proximate satellite interception guidance strategies where both the interceptor and target can perform orbital maneuvers with magnitude limited thrusts. This problem is regarded as a pursuit-evasion game since satellites in both sides will try their best to capture or escape. In this game, the distance of these two players is small enough so that the highly nonlinear earth-centered gravitational dynamics can be reduced to the linear Clohessy-Wiltshire (CW) equations. The system is then simplified by introducing the zero effort miss variables. Saddle solution is formulated for the pursuit-evasion game and time-to-go is estimated similarly as that for the exo-atmospheric interception. Then a vector guidance is derived to ensure that the interception can be achieved in the optimal time. The proposed guidance law is validated by numerical simulations.     

Application of Contact Graph Routing in Satellite Delay Tolerant Networks

Satellite networks have many inherent advantages over terrestrial networks and have become an important part of the global network infrastructure. Routing aimed at satellite networks has become a hot and challenging research topic. Satellite networks, which are special kind of Delay Tolerant Networks (DTN), can also adopt the routing solutions of DTN. Among the many routing proposals, Contact Graph Routing (CGR) is an excellent candidate, since it is designed particularly for use in highly deterministic space networks. The applicability of CGR in satellite networks is evaluated by utilizing the space oriented DTN gateway model based on OPNET(Optimized Network Engineering Tool). Link failures are solved with neighbor discovery mechanism and route recomputation. Earth observation scenario is used in the simulations to investigate CGR’s performance. The results show that the CGR performances are better in terms of effectively utilizing satellite networks resources to calculate continuous route path and alternative route can be successfully calculated under link failures by utilizing fault tolerance scheme.      

非合作目标拖拉式对接机构设计与分析

针对非合作目标对接技术的要求和特点,提出了一种以卫星远地点喷管为对接接口的非合作目标拖拉式对接机构方案。设计了拖拉式对接机构的具体结构并建立其三维CAD模型,根据此模型,对机构进行了包络范围的求解;使用ADAMS软件对机构进行了动力学仿真,分析了对接过程中目标星与机械臂的动态特性,分析了对接过程中捕获力与关节受力情况。计算与仿真结果表明,提出的对接机构能够对目标进行有效、可靠的对接捕获,碰撞接触力小于280N,不会造成本体及目标的破坏。与以往对接机构相比,此拖拉式对接机构具有结构简单、可靠性高、捕获范围大、控制方法简单等优点,且机构受力合理,适合作为空间非合作目标对接的捕获装置。