一种双S形二元排气系统红外特性的模型实验

通过模型实验测量了一种双S形二元(2-D)喷管排气系统壁面压力和温度分布,以及分别在侧向、下方和上方探测面上的红外辐射强度分布,并与基准轴对称排气系统作了对比分析。实验结果表明:双S形二元喷管排气系统在上方探测面上,红外辐射强度比较大,最大值出现在10°探测角;相比基准轴对称排气系统,双S形二元排气喷管系统红外辐射强度在0°探测角方位平均降低了75.5%,在侧向、下方及上方探测面上90°探测角方位分别降低了57.6%、50.9%和17.3%。      

基于改进半阈值算法的电容层析成像滑油监测方法研究

针对航空滑油检测过程中电容层析成像（Electrical Capacitance Tomography,ECT）存在的病态性和欠定性问题,将稀疏正则化中基于L1/2正则化的半阈值迭代算法应用到ECT图像重建,加入L2范数的惩罚项,构造新的泛函模型,并在迭代过程中设计一种新的约束项以优化解向量。仿真实验采用Comsol5.3搭建系统模型,Matlab2014a处理采集数据。实验结果表明,与Landweber迭代算法相比,改进算法成像误差降低37.33%,相关系数提升33.67%;与半阈值迭代算法相比,改进算法成像误差和相关系数分别降低12.31%和提升11.86%,图像误差降低至0.24、相关系数提升至0.92,且成像时间依然保持在0.06s。实际滑油监测的实验系统采用现场可编程门阵列（Field Programmable Gate Array,FPGA）直接数字频率生成模块生成数字量的正弦激励信号,通过D/A转化为正负交流信号对测量电极进行激励。实验结果表明,基于ECT系统的改进半阈值迭代算法可以满足航空发动机滑油监测的实时性和准确性的要求。     

基于4+2轴机床的叶轮加工技术

为扩展4轴机床的加工能力,使4轴机床具有使用鼓形刀具加工叶轮类零件的能力,将4轴机床扩展至4+2轴机床。从机构学角度对4+2轴机床进行运动学分析,证明了4+2轴加工方法的刀具姿态具有一个可优化的角度。根据机床运动链模型,推导了机床半联动轴参数与刀具姿态角度、联动轴运动参数之间的运动变换关系,得到了求解切触点处刀位信息的方法。根据对复杂曲面的几何分析、刀具干涉和机床运动范围,给出了一种4+2轴加工叶片的2个半联动轴参数选择方法。推导了4+2轴加工方法的刀轨生成算法。通过4+2轴叶轮加工实验,验证了4+2轴加工方法的可行性。实验结果表明,4+2轴加工方法生成的刀轨可用,使用4+2轴加工方法加工叶轮叶片的方案是可行的,具有生产应用价值。     

LiNi0.8Co0.15Al0.05O2(NCA)正极材料的磷酸表面改性

针对新一代空间型号产品对储能电源提出的更高需求,提出采用表面改性的方法提升LiNi0.8Co0.15Al0.05O2（NCA）正极材料在锂离子电池中的循环稳定性。通过采用磷酸（H3PO4）对NCA正极材料进行表面处理,H3PO4会与NCA颗粒表面的含锂碱性物质发生反应,从而在NCA颗粒表面生成稳定且导电性良好的Li3PO4界面层。循环以及阻抗测试结果表明,经H3PO4表面处理的NCA材料组装电池循环50次后电池容量为170.5mA·h/g,容量保持率达到94%以上,界面阻抗得到抑制。H3PO4表面处理有效抑制了NCA颗粒表面碱性残留对电化学性能的不良影响,提升了界面稳定性,获得了更好的循环性能。     

GEO卫星氢镍蓄电池在轨温度波动机理分析

在某地球静止轨道通信卫星平台布局的基础上,通过合理地简化和假设建立了南蓄电池舱作为热分析计算模型,对影响蓄电池在轨温度波动的机理进行分析。分析结果表明：在冬至,西板、对地+Y板和背地+Y板受照外热流的日变化会引起其内表面温度大幅度波动,通过舱内热辐射又会引起服务舱南板等结构板内表面温度波动,而服务舱南板通过导热将引起安装其上的蓄电池温度波动,这是导致蓄电池温度波动的根本原因。     

Involvement of nitric oxide in the mechanism of biochemical alterations induced by simulated microgravity in Microcystis aeruginosa

Simulated microgravity (SMG) can inhibit proliferation and enhance microcystin production of Microcystis aeruginosa. We investigated the role of nitric oxide (NO) in regulating the SMG induced changes of proliferation, photochemical system II photochemical activity, pigment, soluble protein and microcystin production in M. aeruginosa. M. aeruginosa was exposed to 0.1 mM sodium nitroprusside (SNP, NO donor) or 0.02 mM 2-(4-carboxyphenyl)-4, 4, 5, 5-tetramethylimidazoline-1-oxyl-3-oxide (c-PTIO, NO scavenger) alone or in combination with SMG for 48 h. SMG and SNP inhibited the growth of M. aeruginosa while c-PTIO had no effect on cell number. As to yield, the negative effect of SMG was augmented by SNP and suppressed by c-PTIO. The intracellular concentrations of chlorophyll a, carotenoid, phycocyanin, soluble protein and microcystin were increased by SMG after 48 h. The effects of SMG on these metabolic processes could be enhanced by SNP and be partly eliminated by c-PTIO. Moreover, SNP and c-PTIO only functioned in these biochemical processes under SMG, unlike in the regulation of cell proliferation and yield. These results showed that the effects of SMG could be enhanced by adding exogenous NO and be mitigated by scavenging endogenous NO, revealing the involvement of NO in the changes in biochemistry processes induced by SMG in M. aeruginosa.     

Variations in the thermosphere and ionosphere response to the 17–20 April 2002 geomagnetic storms

The responses of the thermospheric density and ionospheric foF2 to the intense magnetic storms event on 17–20 April were analyzed by using data from CHAMP/STAR and ionosonde stations respectively, and NRLMSISE-00 and IRI-2007 models were used to simulate. The models can capture the tendency of changes, especially under quiet or moderate geomagnetic conditions, but are less accurate under geomagnetic storms. The thermospheric density is sensitive to the EUV emission and geomagnetic activity, and double-peak structure appeared in the dayside. On 19 April dayside, TADs traveled toward the equator with phase speeds of the order of 300–750 m/s, interfered near the equator to produce a total density perturbation of 25%, and then passed through each other and into the opposite hemisphere. For ionospheric foF2, there are non-symmetric hemispheres’ features during the intense geomagnetic activities. In details, middle latitudes in the north and high latitudes in both hemispheres are negative ionospheric storms, and the maximum amplitudes of δfoF2$\delta \mathit{foF}2$ is about 60%, but the amplitudes decrease from the higher to lower latitudes in the Southern Hemisphere. Meanwhile, the equatorial station shows positive phase, and the maximum value is about 100%. Finally, the mechanisms for these features will be discussed in this study.     

星载天线传感器优化部署的均匀设计方法

为提高模态密集大型星载天线在轨模态参数辨识精度,提出基于均匀设计的遗传算法对传感器数量和位置进行优化部署。根据模态空间H₂范数确定参振模态阶数;分别以测量信息正交性和能量最大为优化目标,引入均匀设计方法对传感器数量、种群规模、交叉概率和变异概率4个组合参数进行选取;采用特征实现算法进行在轨模态参数辨识研究。数学仿真表明：所提出的方法可以有效解决传感器数量和位置的优化部署问题,避免了以往人为经验选取参数时存在的主观性和盲目性问题。     

无侧滑二元超声速进气道侧板遮挡度对其性能影响

针对某Ma_d=2.4矩形进口截面的二元混压式进气道,在Ma_∞=2.51及2.27条件下,数值研究了无侧滑角时侧板遮挡度对进气道性能的影响,获得了喉道处各性能参数随侧板遮挡度的变化关系并分析了其变化原因.研究表明:当侧板下端位于压缩面平直段后,各性能参数变化明显;对于所研究的进气道采用位置靠后的侧板有利于改善进气道的起动性能,但却大大增加了阻力也牺牲了流量系数.      

基于尺度共生矩阵的滚动轴承故障诊断研究

基于滚动轴承振动信号的各种三维或二维谱图中包含的不同故障信息的客观现实,通过二维小波变换在不同尺度空间下构造的小波共生矩阵提取了谱图的纹理特征向量.利用灰关联分析表征这些纹理特征的不同发展态势从而实现滚动轴承的故障诊断.对实测滚动轴承不同状态故障数据的分析表明:该方法具有较高的故障模式分类精度;随着故障尺寸的增加,由于轴承各部件的相互影响诊断正确率会有所降低.同时研究表明对于特定的诊断方法是否进行特征向量归一化需区别对待.