宇航矢量伺服控制器在SiP中的设计与实现

磁场导向控制FOC（field-oriented control）矢量控制算法在伺服驱动控制系统中一般由CPU或DSP实现，难以满足航天应用中实时性较高场景下的需求。为提高宇航电机系统控制的实时性与可靠性，从FOC矢量控制算法的硬件加速角度出发，详细介绍了伺服控制器的设计，给出了一种全数字、高性能的伺服控制器硬件加速设计方案，并在具有可编程逻辑功能的宇航级SiP6117S芯片上进行了验证。仿真实验表明，相比于前人的设计，通过调整观测数据的量化精度来降低硬件加速过程中的处理延时，能有效改善多级流水延迟并在一定程度上提升算法的实时性。     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

L-band nighttime scintillations at the northern edge of the EIA along 95°E during the ascending half of the solar cycle 24

The characteristics of nighttime ionospheric scintillations measured at the L-band frequency of 1.575 GHz over Dibrugarh (27.5°N, 95°E, MLAT ～ 17°N, 43° dip) during the ascending half of the solar cycle 24 from 2010 to 2014 have been investigated and the results are presented in this paper. The measurement location is within or outside the zone of influence of the equatorial ionization anomaly depending on solar and geomagnetic activity. Maximum scintillation is observed in the equinoxes irrespective of solar activity with clear asymmetry between March and September. The occurrence frequency in the solstices shifts from minimum in the June solstice in low solar activity to a minimum in the December solstice in high solar activity years. A significant positive correlation of occurrence of scintillations in the June solstice with solar activity has been observed. However, earlier reports from the Indian zone (～75°E) indicate negative or no correlation of scintillation in June solstice with solar activity. Scintillations activity/occurrence in solstices indicates a clear positive correlation with Es recorded simultaneously by a collocated Ionosonde. In equinoxes, maximum scintillations occur in the pre-midnight hours while in solstices the occurrence frequency peaks just after sunset. The incidence of strong scintillations (S₄ ≥ 0.4) increases with increase in solar activity. Strong (S₄ ≥ 0.4) ionospheric scintillations accompanied by TEC depletions in the pre-midnight period is attributed to equatorial irregularities whereas the dusk period scintillations are related to the sporadic-E activity. Present results thus indicate that the current location at the northern edge of the EIA behaves as low as well as mid-latitude location.     

机载32位计算机指令系统结构军标分析

随着国际形势的缓和,美国国防工业及半导体制造业发生着微妙的变化,于是美国防部果断地提出军杯改革。面对这种情况,国内机载计算机造型、指令系统结构标准的制定和选择目前变成一个热门话题。本文介绍了几种典型的32位计算机指令系统结构标准和美国此方面的应用现状和特点,给出了机载计算机指令系统结构标准确定的可行性与途径。     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

基于μC/OS-Ⅱ的串口通信在S3C2410A上的实现

文章在三星公司的嵌入式处理器S3C2410A为核心的硬件平台上,将嵌入式实时操作系统μC/OS-Ⅱ和μC/GUI在ARM9上整合实现,成功地实现了基于μC/OS-Ⅱ在S3C2410A上的双向串口通信功能。     

民用航空发动机维修工程分析平台设计与实现

随着国产民用大飞机的研制和应用,民用航空发动机的研制和应用需求也逐步显现。为了提高国内民用航空发动机的派遣可靠性,需要对其维修工程服务产品进行专业分析,并通过信息化、规范化的方法促进其维修工程服务产品的发展和应用。首先,研究民用航空发动机维修工程分析的技术应用和行业发展,基于发动机维修工程分析和相关标准规范明确平台的核心模块功能和开发需求;在此基础上,开发发动机维修工程分析平台,并通过实际操作测试平台的各项功能;最后,以发动机燃控系统为例验证该平台的可操作性。结果表明：发动机维修工程分析平台各项功能正常、流程完善、数据合理,为后期设计优化和工程迭代工作奠定了重要的数据基础。     

解析计算在月球中继卫星Halo轨道设计中的应用

面向月球中继卫星工程轨道设计需求,研究解析计算方法在地月系L2点halo轨道设计中的应用问题。在讨论圆型限制性三体问题三阶解析近似计算方法的基础上,分析了解析计算与数值计算的差异,给出了解析近似计算在工程约束下的适用范围,进而提出了基于解析计算的轨道设计和特征筛选方法。分别采用解析初值和数值初值进行halo轨道外推,比对验证采用解析计算设计轨道的可行性。研究结果表明,解析计算方法适用于月球中继卫星轨道的初步设计、特征分析和构型筛选。