基于TC35i和C8051F020的远程数据采集系统

本文提出了一种用混合信号系统级单片机C8051F020控制GSM网络引擎TC35i实现远程数据采集的方案。在描述了远程数据采集系统原理、构成和功能的基础上，对无线通讯模块及硬件和软件设计部分也进行了详细介绍。     

基于TC35i和C8051F020的远程数据采集系统

本文提出了一种用混合信号系统级单片机C8051F020控制GSM网络引擎TC35i实现远程数据采集的方案.在描述了远程数据采集系统原理、构成和功能的基础上,对无线通讯模块及硬件和软件设计部分也进行了详细介绍.     

A novel control method for turboshaft engine with variable rotor speed based on the Ngdot estimator through LQG/LTR and rotor predicted torque feedforward

In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed, a cascade PID control method based on the acceleration estimator of gas turbine speed (Ngdot) and rotor predicted torque feedforward is proposed. Firstly, a two-speed Dual Clutch Transmission (DCT) model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed. Then, an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR) is proposed for power turbine speed cascade control. Finally, according to the cascade PID controller based on Ngdot estimator, a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network (MGD-NN) is put forward to compromise the influence of rotor torque interference. The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control, the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%, which possesses faster response, superior dynamic effect and satisfactory robustness performance. The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.     

A tip clearance prediction model for multistage rotors and stators in aero-engines

Tip clearances of multistage rotors and stators greatly affect aero-engines’ aerodynamic efficiency, stability and safety. The inevitable machining and assembly errors, as well as the complicated error propagation mechanism, cause overproof or non-uniform tip clearances. However, it is generally accepted that tip clearances are difficult to predict, even under assembly state. In this paper, a tip clearance prediction model is proposed based on measured error data. Some 3D error propagation sub-models, regarding rotors, supports and casings, are built and combined. The complex error coupling relationship is uncovered using mathematical methods. Rotor and stator tip clearances are predicted and analyzed in different phase angles. The maximum, minimum and average tip clearances can be calculated. The proposed model is implemented by a computer program, and a case study illustrates its performance and verifies its feasibility. The results can be referred by engineers in assembly quality judgement and decision-making.     

液体火箭发动机涡轮泵转子密封系统动力稳定性研究（该文已撤销，具体请见2015年第12期第1458页的撤销声明）

针对低温液体火箭发动机涡轮泵转子密封系统开展了动力学稳定性研究。采用有限元法建立了涡轮泵转子密封系统的动力学模型,研究了安装偏心对转子密封系统稳定性的影响,给出了失稳转速随安装偏心的变化规律,研究了当量密封间隙对涡轮泵转子系统稳定性的影响,分析了当量密封间隙对失稳转速的影响,最后开展了冷吹试验和热试试验研究,为液体火箭发动机涡轮泵转子系统结构设计、诊断与维护提供理论依据。     

NASA大型民用倾转旋翼机进展研究

倾转旋翼机是一种结合固定翼飞机和旋翼飞机双重优势的新型飞机,它具有速度快、油耗低、垂直起降等特点。在波音和贝尔公司联合研制的军用倾转旋翼机取得成功后,NASA试图在相关技术的基础上研制出一种90座、航程约为1200nmile、速度约为600km/h的新型先进民用倾转旋翼支线飞机,进而取代现役固定翼支线飞机。通过系统地搜集和科学地分析,明晰了NASA大型民用倾转旋翼机项目的内容、进展、风险和影响并对ARJ21支线项目提出早期预警。     

基于时频分析的裂纹转子碰摩故障特征研究

为研究转子系统耦合故障特性,采用有限元方法建立了含有横向裂纹、转静碰摩的非线性转子动力学模型。首先研究了不同转速下裂纹、碰摩单一故障下转子系统的振动响应,其次研究了两种故障耦合情况下系统的振动响应特征。采用波形图、FFT谱图、瞬时频率和Hilbert-Huang时频谱(HHS)相结合的方法对故障转子振动信号进行了分析。分析结果表明:运用多种时频分析相结合的方法可以较为全面地了解转子的故障特征,裂纹转子在1/5、1/3临界转速时会发生较为明显的5X、3X谐波,且裂纹的产生会导致响应幅值增大,从而引起更为严重的碰摩。     

直升机旋翼回波特性建模

给出了雷达半主动寻体制的直升机旋翼回波模型,分析了直升机旋翼回波的时频特性,以旋翼真实参数对模型进行了仿真,并研究了直升机旋翼回波在时域上的调制效应及频域分布特点。结果表明：理论模型所得结果与外场实验的导引头跟踪直升机实验数据吻合。     

涡轮泵转子的临界转速研究(Ⅳ)分布质量轴的传递矩阵法

根据旋转的 Timoskenko梁的运动微分方程式 ,导出分布质量轴段的 4× 4阶精确传递矩阵 ,计入轴分布质量的平动惯量、转动惯量、陀螺力矩和剪切变形的影响 ,并计算了三个转子的临界转速。算例的计算结果表明 ,轴模型是否按分布质量考虑、是否计入平动惯量、转动惯量、陀螺力矩和剪切变形 ,对临界转速有明显的差别 ;同时在等截面轴不分段情况下 ,传递矩阵的计算结果和精确解一致性很好 ,表明计算实际转轴临界转速时 ,只需按截面不同划分轴段 ,即所取的轴分段数量少 ,就可以达到很高的计算精度     

An adaptive integration surface for predicting transonic rotor noise in hovering and forward flights

In this paper, a new permeable adaptive integration surface is developed in order to evaluate transonic rotor noise in accordance with FW-H_pds equations(Ffowcs Williams-Hawkings equations with penetrable data surface). Firstly, a nonlinear near-field solution is computed on the basis of Navier-Stokes equations, which is developed on moving-embedded grid methodology.The solution calculated through the present CFD method is used as the input for acoustic calculations by FW-H_pds equations. Then, two criteria for constructing integration surfaces are established based on the analysis of the quadrupole source strength and the nonlinear characteristic.A new surface is determined adaptively by the pressure gradient or density in a given flowfield,eschewing the uncertainties associated with determining cylinder-shaped integration surfaces. For varying hover cases, transonic noises are simulated with new integration surfaces for a UH-1 model rotor. Furthermore, numerical results of the new integration surface derived from the density perturbation value conform better to experimental data than results derived from the pressure gradient.Finally, the integration surface given by jrqj being 0.1, which is an applicable criterion obtained from hover cases, is used to predict transonic rotor noise in forward flight. The computational accuracy of the new integration surface method has been validated in predicting transonic rotor noise of an AH-1 model rotor at different advance ratios.