一种研究圆柱度目标函数单谷性的新方法

提出了一种研究圆柱目标函数单谷性的新方法，圆柱度目标函数单谷性的问题目前研究得还少，而弄清楚圆柱度目标函数是否是单谷函数对于用优化原理正确地计算其极值是非常重要的。     

均值检验方法及其在冗余惯性导航系统中的应用

采用了非线性滤波的方法对影响故障检测及分离（FDI）性能的传感器误差进行了补偿,同时提出了故障检测与分离的均值检验方法（MVT）,该方法可以对2个传感器同时出现故障的情况进行检测与隔离。5个陀螺冗余惯性导航系统仿真结果验证了本文算法的有效性。     

PRACTICAL G~2 CONTINUITY ALGORITHMS BETWEEN ADJACENT NURBS PATCHES

Geometriccontinuityiswidelyrecognizedastheappropriatewaytofittogethertwoadja-centsurfacepatchesinCAD/CAM.ItavoidsdePendenceofparametrizatinnandprovidesaddi-tionalparametersformodelingtheshapes.Apatchworktechniqueconstructsanycompositesurfacestraightforwardly,patchbypatch.ThetangentplanecontinuityG1andcurvaturecon-tinuityG2ofparametricsurfacepatcheshavebeenstudied[1~6J-AlltheseresearchersworkwithsurfacepatchesinBezierformandrationalBezierform.IncontrasttoNURBSsurface,BezierandrationalBe…     

SDM 标模大攻角动导数试验

介绍了ＣＡＲＤＣ高速所１．２ｍ风洞大攻角的动导数试验装置与测量系统以及在１．２ｍ风洞中对标准动态模型（ＳＤＭ标模）所作的一系列风洞试验结果。试验结果与国外文献数据具有较好的一致性。试验结果随马赫数和攻角的变化表现出明显的非线性,而减缩频率的影响并不显著。天平与测试系统的重复性精度较高。     

弧齿锥齿轮波动共振条件分析

应用弹性理论和波动理论, 推出旋转盘形弧齿锥齿轮波动响应的模态解, 重点讨论了啮合力F对齿轮波动共振的影响。给出了弧齿锥齿轮波动共振的条件。      

供应链需求信息的信息增量与信息价值

基于信息科学的理论,给出供应链需求信息的信息增量与信息价值的定义和度量方法.建立供应链上的一个批发商订货决策模型,揭示了需求信息在订货决策过程中是如何发挥作用,以及批发商的期望收益是如何随之发生变化的.针对均匀分布和正态分布两种典型的需求分布,分析信息对于供应链成员的价值,进而研究需求信息的信息增量与其信息价值之间的关系.公式推导和模拟实验结果都证明需求信息的价值与其信息增量的大小之间存在正相关关系,表明信息增量会影响信息使用者的收益.研究结果也证明对于供应链成员而言很有必要建立一个有效的信息评价体系,通过提高决策信息质量来增加收益.      

Advanced fractal approach for unsupervised classification of SAR images

Unsupervised classification of Synthetic Aperture Radar (SAR) images is the alternative approach when no or minimum apriori information about the image is available. Therefore, an attempt has been made to develop an unsupervised classification scheme for SAR images based on textural information in present paper. For extraction of textural features two properties are used viz. fractal dimension D and Moran’s I. Using these indices an algorithm is proposed for contextual classification of SAR images. The novelty of the algorithm is that it implements the textural information available in SAR image with the help of two texture measures viz. D and I. For estimation of D, the Two Dimensional Variation Method (2DVM) has been revised and implemented whose performance is compared with another method, i.e., Triangular Prism Surface Area Method (TPSAM). It is also necessary to check the classification accuracy for various window sizes and optimize the window size for best classification. This exercise has been carried out to know the effect of window size on classification accuracy. The algorithm is applied on four SAR images of Hardwar region, India and classification accuracy has been computed. A comparison of the proposed algorithm using both fractal dimension estimation methods with the K-Means algorithm is discussed. The maximum overall classification accuracy with K-Means comes to be 53.26% whereas overall classification accuracy with proposed algorithm is 66.16% for TPSAM and 61.26% for 2DVM.     

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Auxetic materials have previously been shown to enhance various performances due to its unusual property of becoming fatter when uniaxially stretched and thinner when uniaxially com-pressed (i.e., the materials exhibit a negative Poisson’s ratio). The current study focuses on assessing the potential of an auxetic material to enhance the buckling capacity of a rectangular plate under uniaxial compression. The in-plane translational restraint along the unloaded edges that was often neglected in open literature is taken into consideration in our buckling model proposed in this study. The closed-form expressions for the critical buckling coefficient of the rectangle are provided and the predicted results agree well with those determined by the finite element method. Further-more, the results indicate that the buckling performance of a rectangular plate under uniaxial com-pression can be significantly improved by replacing the traditional material that has a positive Poisson’s ratio with an auxetic material when there is in-plane translation restraint along the unloaded edges.     

Distributed state estimation for heterogeneous mobile sensor networks with stochastic observation loss

The problem of distributed fusion and random observation loss for mobile sensor networks is investigated herein. In view of the fact that the measured values, sampling frequency and noise of various sensors are different, the observation model of a heterogeneous network is constructed. A binary random variable is introduced to describe the drop of observation component and the topology switching problem caused by complete observation loss is also considered. A cubature information filtering algo...     

不同冲击能量对层合板损伤及剩余强度的影响

基于三维逐渐损伤理论和全程分析方法,对复合材料层合板在冲击载荷及冲击后静载荷下的损伤过程进行分析,重点研究不同冲击能量对两种不同铺层参数、不同几何尺寸的T300/BMP-316复合材料层合板的损伤产生与扩展过程以及剩余强度的影响规律.结果表明:复合材料层合板存在可使其剩余强度急剧下降的冲击能门槛值.对于T300/BMP-316复合材料层合板而言,其冲击能量的门槛值介于5.0～5.5J之间;在冲击过程中,冲头下落速度具有一定的波动性,且不同铺层参数将影响冲击后复合材料层合板表面的凹痕深度.