Chaboche随动硬化模型参数确定及棘轮效应

采用遗传算法确定不同Chaboche随动硬化模型的参数,得到的3种模型中,四分量模型对棘轮的预测与试验结果符合最好.增大应力幅值或应力平均值,都会使应变峰值增大,应变累积速度加快;利用确定的四分量模型研究加载顺序对棘轮的影响.结果表明,平均应力加载顺序对棘轮预测有较大影响,加载顺序高-低的累积应变低于加载顺序低-高的累积应变,而且先加载的平均应力越大,后加载的载荷产生的累积应变越小;而应力幅值加载顺序对应变累积几乎没有影响.     

DOR测量自适应模型重构算法与实验验证

针对"金星快车"(Venus Express,VEX)探测器大时延、快变化的轨迹特点,提出了一种基于侧音信号相频特性的自适应模型重构算法。该方法极大增强了参考模型精度恶化情况下算法的适应性与稳定性。基于"金星快车"DOR观测实验的数据分析,通过与欧洲航天局提供的事后高精度星历轨道对比,结果表明数据处理算法时延精度优于ns量级,时延率精度优于1ps/s量级。     

应用计算几何的月面太阳辐照度仿真模型

月面太阳辐照度对月面环境分析、月面巡视器设计具有重要意义。文章提出了一种应用计算几何的月面任意位置太阳辐照度仿真模型。首先,计算太阳、地球等天体相对月面点的位置;然后,将各天体投影至以月面点为球心的天球球面,并通过裁剪运算和二维布尔运算得到太阳未被遮挡的形状;最后,利用太阳可见面积对理想太阳辐照度模型进行修正,得到通用的模型。为验证提出模型的有效性,将仿真结果与STK软件进行比较。结果表明,文章中的模型综合考虑了地球、月面等多种因素对太阳辐射的耦合影响,其与STK软件获得的结果相比,更符合真实的太阳光照状态。     

基于模型的系统工程方法在载人航天任务中的应用探讨

针对基于文档的航天任务设计中设计数据分散、一致性差、跟踪难度大等问题,引入了基于模型的系统工程(MBSE)方法。首先,介绍了MBSE方法理念,即通过构建图形化的模型来支持系统的需求捕获、设计、分析、验证和确认等全生命周期活动。然后,给出了MBSE方法的一般工作流程,即先构建系统的需求模型,用于指导功能模型、物理架构模型等的构建,按照事先制定好的逻辑规则建立模型间的关系,依靠模型间的关系实现设计过程中的关联性分析、参数查询等工作。最后,应用MBSE方法于载人飞船交会对接任务中。结果表明,此方法改善了人员沟通,提高了设计效率,降低了设计风险,可为MBSE方法在航天任务设计中的进一步应用提供参考。     

Intra-annual variations of the thermospheric density at 400 km altitude from 1996 to 2006

We investigate the intra-annual variations of globally averaged thermospheric density at 400 km altitude from 1996 to 2006 by using Artificial Neural Network Method (ANNM). The results indicate that thermospheric density is governed by solar activity, and the absolute error of our model is 13.67%, less than NRLMSISE-00 model. Fourier representation can catch the intra-annual variations more accurately than NRLMSISE-00 model and JB2008 model especially during 2002. We find that the Autumn maximum is slightly greater than Spring maximum during solar minimum, while the reverse is correct during solar maximum. There is a strong linear relation between solar activity and the amplitude of annual/semiannual variations, and the correlation coefficients are 0.9534 and 0.9424, respectively. Moreover, the amplitude ratio of the annual to semiannual variation is about 1.3 averaged, and changes in different years, but it has little relation with solar activity. Besides that, the amplitude of annual variation is larger than semiannual variation during 1996 and 2006 except 1998 and 2000. The relative error of NRLMSISE-00 model is 14.95%, decreasing to 12.49% after revising, and the correlation coefficients between this empirical model and its improved results and the observation are 0.8185 and 0.9210, respectively. Finally, we suggest the revised version of MSIS series of model should use the Fourier representation to express the intra-annual variations.     

Method for the prediction of the effective dose equivalent to the crew of the International Space Station

This paper describes a methodology for assessing the pre-mission exposure of space crew aboard the International Space Station (ISS) in terms of an effective dose equivalent. In this approach, the PHITS Monte Carlo code was used to assess the particle transport of galactic cosmic radiation (GCR) and trapped radiation for solar maximum and minimum conditions through an aluminum shield thickness. From these predicted spectra, and using fluence-to-dose conversion factors, a scaling ratio of the effective dose equivalent rate to the ICRU ambient dose equivalent rate at a 10 mm depth was determined. Only contributions from secondary neutrons, protons, and alpha particles were considered in this analysis.     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

一种基于光固化快速成型的飞机静弹性风洞试验模型设计方法

高速风洞静弹性模型设计和制造是静弹性风洞试验的一个关键。为解决模型设计周期长、制造费用高等问题,提出了一种基于立体光固化快速成型面向高速风洞大展弦比机翼静弹性模型研制方法。基于机翼刚度分布相似参数,采用机翼钢梁骨架和树脂蒙皮组合结构,通过优化结构尺寸完成静弹性模型结构设计;使用机械加工和快速成型技术完成模型制造,并通过地面刚度试验对加工模型进行了刚度分布验证。风洞试验结果表明：基于立体光固化成型技术设计和制造的静弹性风洞试验模型工程实用、可行,与传统静弹性模型研制过程相比,具有研制周期短、成本低而且不存在因填充物带来附加刚度的显著优势。     

多退化变量下基于Copula函数的陀螺仪剩余寿命预测方法

针对惯性导航系统中陀螺仪多退化变量条件下的剩余寿命（RUL）预测问题,提出了一种基于Copula函数的多退化变量剩余寿命预测方法。首先,针对退化变量间不同的退化轨迹,采用不同的方法进行退化建模,并对于陀螺漂移系数样本标准差数据波动性随时间递增的特性,提出了一种方差时变的正态随机过程退化建模方法,得到了陀螺仪剩余寿命的边缘分布函数。然后,通过Copula函数来描述退化变量之间的相关性,将得到的剩余寿命的边缘分布进行融合,得到了陀螺仪剩余寿命的联合分布函数。最后,通过陀螺仪实例分析验证了方法的适用性和可行性。     

基于LS-DYNA滚动轴承使役可靠度计算方法

利用软件LS-DYNA对滚动轴承使役过程进行了动态有限元计算,基于响应面法（RSM）建立6408滚动轴承输入参数与输出响应的函数关系方程,设定各类随机误差分布,利用矩阵试验法确定抽样点在输入变量抽样空间的位置,进行一系列确定性拟合试验.每次试验借助LS-DYNA进行精确求解,运用求解数据对方程进行最小二乘法回归分析确定方程的组成项及系数.最后利用函数关系方程计算轴承任意时刻的使役可靠度.结果表明:计算得出该轴承在0.020008s时的使役可靠度为97.062%.